Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

IASTEM INTERNATIONAL CONFERENCE, Kobe, Japan 06-02-2018

← All proceedings

Proceedings cover: IASTEM INTERNATIONAL CONFERENCE, Kobe, Japan 06-02-2018

IASTEM INTERNATIONAL CONFERENCE

Kobe, Japan 06-02-2018

5 papers

  1. Analysis On The Effectivity Of Glazed Double Skin Façade In Promoting Indoor Air Movement

    Akhlish Diinal Aziiz, Suhendri, M.D Koerniawan, Surjamanto Wonorahardjo, Rachmawan Budiarto

    Paper ID IA-ICCAEKOB-06028-6519 · Pages 1-5

    Abstract

    There are many advantages of double skin façade, and thus it is applied widely in building design. One of the advantages is that the double skin façade presumably can deliver wind into the room. This study aims to investigate that specific advantage of the double skin façade. The research built a double skin façade prototype designated for high rise buildings. The prototype had already been studied in experimental and numerical manner. The study was in terms of surface temperature reduction due to the double skin façade installation. Hence, this study is a continuation of the previous work. This research use numerical method using Computational Fluid Dynamics simulation to model the air flow created by the double skin façade. The double skin façade is attached to a 5 x 5 m2 room as the case study. Three schemes are simulated, which is differed only by the double skin façade’s width. The results reveal a positive linear correlation between the wind speeds that enter the room to the double skin façade’s width. Index Terms - Buoyancy-driven ventilation, Computational fluid dynamics, Double skin façade, Indoor air movement.

    Download PDF: Analysis On The Effectivity Of Glazed Double Skin Façade In Promoting Indoor Air Movement
  2. A Numerical Study On The Shape Characteristics Of Circular Underground Cavity

    Byung-Chan Kim, Joon-Sang An, Hyun-Sik Jin

    Paper ID IA-ICCAEKOB-06028-6780 · Pages 6-9

    Abstract

    In recent years, ground subsidence phenomenon frequently occurs in the world. The Korean government has enacted a special law on underground safety and the law will be enforced from January 1, 2018. Under this law, underground excavation should be assessed for underground safety impacts. After excavation construction, periodic geophysical surveys should be conducted to investigate the occurrence of underground cavities. When underground cavities were discovered, the underground safety was assessed through numerical analysis. However, there is controversy because the method of numerically modeling the discovered underground cavity has not been established. In this study, the effect of the depth of the underground cavity from the shape of the underground cavity to the underground cavity was studied using a continuum analysis program. In this study, a method to reflect the circular shape underground cavity to the numerical modeling is presented. The relationship between circular shape and depth of the underground cavity and the factor of safety calculated by the shear strength reduction method (SSR) is presented. The results of this study are expected to be basic data on underground safety impact assessment. Index Terms - Underground Cavity, Numerical Analysis, Ground Subsidence, Shear Strength Reduction Method (SSR)

    Download PDF: A Numerical Study On The Shape Characteristics Of Circular Underground Cavity
  3. Development Of Deep Subsea 3d Information System Concept Model

    Dong-Min Kim, O-Il Kwon, Woo-Seok Kim, Jin-Hwan Kim

    Paper ID IA-ICCAEKOB-06028-6886 · Pages 10-14

    Abstract

    In this study which is intended to develop the system module providing 3D information on subsea ground, development of ground information data process which is the core module of 3D information system and ground information visualization module was conducted. Ground information data process module was compiled with the data in same format for 3D visualization of subsea ground investigation result and analysis data and correlation among the data was calculated to make the ground information expressed linking each other. Index Terms - Subsea ground, 3D, Visualization, Information system, Module

    Download PDF: Development Of Deep Subsea 3d Information System Concept Model
  4. Automation Method To Identify The Geological Structure Of Seabed Using Spatial Statistical Analysis Of Echo Sounding Data

    Oil Kwon, Woo-Seok Kim, Jin-Hwan Kim, Dong-Min Kim

    Paper ID IA-ICCAEKOB-06028-6930 · Pages 15-16

    Abstract

    Recently construction of subsea tunnel has been increased globally. In Korea, subsea tunnel construction project to link the Korean Peninsula to Jeju Island has been drawing more attention. For safe construction of subsea tunnel, identifying the geological structure including fault at design and construction stage is more than important. Then unlike the tunnel in land, it's very difficult to obtain the data on geological structure because of the limit in geological survey. This study is intended to challenge such difficulties in a way of developing the technology to identify the geological structure of seabed automatically by using echo sounding data. Index Terms - Geophysical investigation, Geological structure, Subsea tunnel, Spatial statistics, Echo sounding

    Download PDF: Automation Method To Identify The Geological Structure Of Seabed Using Spatial Statistical Analysis Of Echo Sounding Data
  5. System To Provide 3d Information On Geological Anomaly Zone In Deep Subsea

    Woo-Seok Kim, O-Il Kwon, Byung-Chan Kim

    Paper ID IA-ICCAEKOB-06028-6933 · Pages 17-20

    Abstract

    This study is intended to analyze the geological anomaly zone for ultra deep seabed l and visualize the geological investigation result so as to develop the exclusive system for processing the ground investigation information which is convenient for the users. Particularly it's compatible depending on file of geophysical prospecting result and is realizable in Layer form and for 3D view as well. The data to be processed by 3D seabed information system includes (1) deep seabed topographic information, (2) geological anomaly zone, (3) geophysical prospecting, (4) boring investigation result and (5) 3D visualization of the section on seabed tunnel route. Each data has own characteristics depending on data and interface to allow interlocking with other data is granted. In each detail function, input data is displayed in a single space and each element is selectable to identify the further information as a project. Program creates the project when initially implemented and all output from detail information is stored by project unit. Each element representing detail information is stored in image file and is supported to store in text file as well. It also has the function to transfer, expand/reduce and rotate the model. To represent the all elements in 3D visualized platform, coordinate and time information are added to the data or data group to establish the conceptual model as a whole. Index Terms - Geological anomaly zone, geophysical investigation, 3D information system, subsea tunnel

    Download PDF: System To Provide 3d Information On Geological Anomaly Zone In Deep Subsea