Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

105TH IASTEM INTERNATIONAL CONFERENCE, Putrajaya, Malaysia 04-02-2018

← All proceedings

Proceedings cover: 105TH IASTEM INTERNATIONAL CONFERENCE, Putrajaya, Malaysia 04-02-2018

105TH IASTEM INTERNATIONAL CONFERENCE

Putrajaya, Malaysia 04-02-2018

8 papers

  1. Numerical Analysis Of High Rise RCC Buildings With Shear Walls Having Opening Of Different Shapes

    Md. Maksudul Haque, Md.Hasibulhasan Rahat1, Rifat-AL-Saif, S. Reza Chowdhury

    Paper ID IA-ICCAEPUTRA-04028-6492 · Pages 1-5

    Abstract

    Shear walls are provided in high rise structures and structures located in higher seismic vulnerability areas. The primary purpose of shear wall is to resist lateral forces arising due to earthquake or wind. This project aims to study effect of various types of openings and without openings in shear wall on behavior of structural frames. In this study different storied RCC buildings with shear wall have been analyzed using finite element software ETABS9. The same buildings have analyzed having openings of different shapes (Rectangular, Triangular) and without openings in shear wall. The structures are analyzed with equivalent static method. Non Llinearity is not considered here. Deflection, axialforce, shearforce, bending moment of column of buildings having shear wall with opening and without opening have been obtained. Deflection, axialforce, shearforce, bending moment increase with number of stories. Buildings having 8,10,12,15 stories have been analyzed. The longest span in X direction is 22 ft. and in Y direction is 20 ft. Total length in X direction is 110 ft. and in Y direction is 60 ft. The comparative results have showed that the deflection, axial force, shear force and bending moment at bottom column depend on the shapes of openings with different number of stories of structures. Index Terms - Shear Wall,Shear Wall Opening, High Rise RCC Building,Soft Storey.

    Download PDF: Numerical Analysis Of High Rise RCC Buildings With Shear Walls Having Opening Of Different Shapes
  2. Analysis Of Shear Wall Location Due To Earthquake Effect In High Rise Rcc Structures

    Md. Maksudul Haque, Md.Hasibulhasan Rahat1, Rifat-Al-Saif, S. Reza Chowdhury

    Paper ID IA-ICCAEPUTRA-04028-6812 · Pages 6-10

    Abstract

    Major hazards from earthquake, storms, tsunami in recent decades have brought increasing awareness among structural engineers. Earthquake produces large amount of lateral forces. Shear walls in building are better solution to counteract these forces. Our primary goal is to identify the best location of shear wall to generate minimum deflection. To achieve this goal a 25storeyed commercial cum residential building has been analyzed and the results of deflections for various loads and location cases have been compared for minimum deflection.The general definition of shear wall, their need, scope and objective of this study have been stated. The definition of shear wall is elaborately and briefly described here. Various types of shear walls, their common behavior, the loads they are subjected to are also described here. The most common and usual trend of shear wall location and shape havealso been discussed here.Methodology is mainly concerned with the defining of the different location cases for shear wall and their model generation. For this study 5 different location cases for a shear wall while keeping all the other structural element unchanged. The cases include Case1: the original plan, Case2: moving the shear wall 35 inch inward, Case3: moving the shear wall 70 inch inward, Case4: moving the shear wall 105 inch inward, Case5: moving the shear wall 140 inch inward. The model generation process of these 5 cases considering the loads such as Dead, Live, Wind, Earthquake have been developed by software ETABS9.The comparative results have showed that shear walls are more effective at the outer periphery and near columns. The structure has analyzed without basements. So their responses to loads are not included in the paper. Index Terms - Shear Wall, Shear Wall Location,High Rise RCC Building, Earthquake.

    Download PDF: Analysis Of Shear Wall Location Due To Earthquake Effect In High Rise Rcc Structures
  3. Biosorption Of Cadmium, Copper And Zinc From Single And Ternary Metal Solutions By Sawdust Of Daniellia Olliveri

    Abdur-Rahim Adebisi Giwa, Oluwafemi Dayo Olajide, Francois Wewers, Deborah Olubunmi Aderibigbe

    Paper ID IA-ICENSPUTRA-04028-6417 · Pages 11-14

    Abstract

    This research investigated the adsorption of Copper, Zinc and Cadmium from their aqueous solutions using the sawdust of Danielliaolliveri as an adsorbent. The adsorbent was characterised by determining its functional group, Surface morphology and elemental composition using FTIR, SEM and EDX respectively. Batch adsorption was employed in studying the effect of experimental conditions (contact time, adsorbent dose, initial metal concentration, pH and temperature) on the adsorption of the metals in single and ternary systems. Thermodynamics parameters such as Enthalpy, Entropy and Free energy changes of the process were evaluated. The data obtained from equilibrium experiments were analysed using the Langmuir, Freundlich and Temkin isotherm models while the adsorption kinetics was elucidated with Pseudo- first order, Pseudo second order and intra particle diffusion models. The data were well fitted to Langmuir isotherm and Pseudo second order kinetics models. The adsorption was thermodynamically feasible and exothermic; the maximum monolayer coverage of the adsorbent by the cadmium and zinc was negatively affected by competitive adsorption in the ternary system. Keyword-Danielliaoliveri, Adsorption,Biosorption, Sawdust, Heavy metals, Ternary system, Copper, Cadmium, Zinc,

    Download PDF: Biosorption Of Cadmium, Copper And Zinc From Single And Ternary Metal Solutions By Sawdust Of Daniellia Olliveri
  4. Physical Pretreatment Of Lignocellulosic Biomass For Utilizing Environmental Waste To Produce Biofuel

    Jin Hyung Lee

    Paper ID IA-ICENSPUTRA-04028-6822 · Pages 15

    Abstract

    Enzymatic saccharifiation of lignocellulosic biomass is low efficient process due to the recalcitrance of the biomass. Lignocellulosic biomass is composed of three major components; cellulose, hemicellulose and lignin, and cellulose is mainly used for producing fermentable sugar. However, cellulose is recalcitrant to enzymatic saccharification due to its highly crystalline structure. Furthermore, cellulose is structurally connected with lignin, which is a hindrant for cellulase accessibility. To solve these limitation, enzymatic saccharification process was combined with mechanical ball mill process. Mechanical ball mill process was effective for reducing biomass size and crystallinity, which ultimately improved digestability of cellulose. In this study, the effect of mechanical ball mill process on cellulase activity was investigated. By combining mechanical ball mill process, glucose conversion was obtained maximumly84.02%. The production of soluble phenolic compounds was only 0.072 ±0.003 g/L. Enzymatic saccharification was very fast and about 80% of process was completed within 24 hr after combining ball mill process. Typically, as increasing milling time, enzymatic saccharification process showed two different results depending on morphological change of biomass particles. As increasing milling time, biomass particles were crushed and, furthermore, formed increased surface area. In this case, the production of fermentable sugar by enzymatic saccharification was improved as increasing milling time. In the other case, biomass particles were crused and changed to small fragments as increasing milling time. However, the small fragments of biomass started agglomerating each other over certain time and form increased size of agglomeration. Therefore, sugar production is decreased as increasing milling time in this case. Finally, fermentation of the fermentable sugar by Clostridium beijerinckii NCIMB8052 gave slightly better butanol yields than cultures grown in a typical lab media (P2), with final concentrations of 6.91 and 6.66g/L, respectively.

    Download PDF: Physical Pretreatment Of Lignocellulosic Biomass For Utilizing Environmental Waste To Produce Biofuel
  5. Flexural And Impact Characterization Of UV Treated Areca Fiber Polypropylene Composites

    Raghuveer H. Desai, L. Krishnamurthy, T.N. Shridhar

    Paper ID IA-ICMAEPUTRA-04028-6729 · Pages 16-20

    Abstract

    Polymer based natural fiber reinforced composites are emerging as a promising new engineering material. The main advantage of natural fibers are low density, low cost, biodegradability, acceptable specific properties, availability, less wear during extracting as well as manufacturing composites. This investigation has been carried out to evaluate the interfacial bonding between fiber and polypropylene, flexural and impact properties of composite prepared by areca fibers with randomly distributed fibers. The extracted areca fibers were treated by Ultraviolet radiation to obtain better interfacial bonding between fiber and matrix. The test samples have been prepared as per ASTM standards using injection moulding technique at different fiber weight loading fractions (10%, 20%, 30%, and 40%). Flexural and impact tests have been carried out on the plain polypropylene composites and developed areca fiber-reinforced polypropylene based composites. The treated and untreated areca fiber-reinforced polypropylene composites have been modeled and analyzed by means of finite element method and compared with flexural experimental results. It has been observed that flexural and impact strength increases with increase in the fiber loading percentage when compared to plain polypropylene and untreated areca fiber composites beyond 20% for treated areca fiber composite. The present work also includes the analysis of areca fiber reinforced polypropylene composites using FEA with various fiber volume fractions and these results were validated with the experimental results. Key words- Areca Fiber, Flexural Strength, Impact Strength, Interface bonding, UV Treatment.

    Download PDF: Flexural And Impact Characterization Of UV Treated Areca Fiber Polypropylene Composites
  6. Chemical Composition, Antioxidant And Antibacterial Properties Of The Oil Extracted From The Seeds Of Zahidi Date Palm (Phoenix Dactylifera)

    Mohamed E. S. Mirghani, Maha I. Alkhalf

    Paper ID IA-ICMBPSPUTRA-04028-6109 · Pages 21

    Abstract

    Date palm “Phoenix dactylifera” (Zahidi) is one of the oldest-known cultivars, it is of medium size, cylindrical, light golden-brown; semi-dry but harvested and sold in 3 stages: soft, medium-hard, and hard. In this research, the chemical composition of the oil processed from the seed of the date palm Zahidi, its antioxidant capacity, and antibacterial properties were investigated. Date seeds were ground and extracted for the oil. Qualitative and quantitative analysis of the oil was carried out using wet chemical analysis as well as a GC-MS technique. Extracted oil was tested for possessing antimicrobial activity, which has been evaluated using Petri dish technique using the Kirby-Bauer Disk Diffusion method. Antibacterial activity was examined on four (4) bacterial strains that include (Bacillus subtilis, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli). Ampicillin and azithromycin were used as positive standards. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentrations (MBC) of the extracted oil were determined. Antioxidant activity was assessed as free radical scavenging capacity (RSC) towards 2,2- diphenyl-1-picrylhydrazyl (DPPH●) radicals for methanol fraction (MF) and the remaining lipid fraction (LF) as well as for non-fractioned oil i.e. total fraction (TF). Phenolic compounds in date seed oil were determined according to the high-performance liquid chromatographic (HPLC). The results showed that the oil is edible, suitable for cosmetic, soap and personal care products. This study also showed that Zahidi seed oil extract inhibited all test microorganisms with MIC ranging from 10 to 42 mg/mL and with MBC ranging from 21 to 167 mg/mL. Results revealed that the extracts can be used as a source of natural antimicrobial compounds which can be applied to foods to prevent the growth of undesirable microorganisms. The results also showed the high potential of antioxidant activity since the RSC towards DPPH radical for MF, LF and TF were 42.5, 9.1 and 68.3, respectively. That prevents lipid oxidation that was tested showing low peroxide value of preheated oil. Keywords- Date Palm (Phoenix dactylifera), Antioxidant, Antibacterial properties, DPPH●, GC-MS, Ampicillin, Azithromycin, and Lipid fraction, RSC.

    Download PDF: Chemical Composition, Antioxidant And Antibacterial Properties Of The Oil Extracted From The Seeds Of Zahidi Date Palm (Phoenix Dactylifera)
  7. The Effects Of The Rise Of Consumption On Income Polarization In Malaysia

    Noraniza Yusoff

    Paper ID IA-ICSSHPUTRA-04028-6530 · Pages 22-26

    Abstract

    There are occur situation regarding rising of development theory that were viewed as unbalance and incline to external influences that produce outcome which not focus on a domestic unit consuming. The process of urbanization produces big enhances in the real and the maximum activity of consuming nevertheless take place a lowering in effectiveness of power usage. This study utilized survey questionnaire for data collection. Data collection and analysis employed quantitative approach. The numbers of respondents involved in survey were 434 samples that gave agreement for participation in the study. Findings imply that Spearman’s correlation coefficient was statistically significant. There is positive relationship among the rise of consumption and income polarization. Ordinal regression indicates that the model gives better assumptions than if guessed centered on the marginal probabilities for the outcome variables. However, the data and the model assumptions are do not have a good model. Index Terms- Consumption, income, Malaysia, polarization.

    Download PDF: The Effects Of The Rise Of Consumption On Income Polarization In Malaysia
  8. Analysis On Connection Of Urbanized City And Employment In Malaysia

    Noraniza Yusoff

    Paper ID IA-ICSSHPUTRA-04028-6667 · Pages 27-31

    Abstract

    The linkage among urbanization and expansion is a pivotal agenda adopt largely in African and Asia. Communities spread out to the city to investigate for life and dweller enlarge that links to enhance in the earning of the city via earning taxes or distinctly deplete the social and economic occurrences because of poor urban planning, uncommon available occupation chances and none fundamental services. The objective of this research is to determine the linkage between urbanized city and employment. This research used quantitative method for data collection and analysis. Data collection employed survey approach via questionnaire involved a large number of people. Data collection involved 434 peoples that is dweller in the study regions as the samples in the study. Findings indicate that there is no association among urbanize city and employment using data analyses namely scatterplot and Spearman correlation. Ordinal regression indicates that the model without predictors is as good as the model with the predictors. Index Terms- City, employment, urbanization, urbanized.

    Download PDF: Analysis On Connection Of Urbanized City And Employment In Malaysia