108TH IASTEM INTERNATIONAL CONFERENCE
Kota Kinabalu, Sabah, Malaysia 10-03-2018
6 papers
-
Dome Structure in Coastal Area Condition Assessment Using CSP 1 Matric Application
Asmawan Mohd Sarman, Adi Irfan Che Ani, Elis Mardzianah Mazlan, Farahyni Yahya
Paper ID IA-ICCAEKOTA-10038-7096 · Pages 1-5
Download PDF: Dome Structure in Coastal Area Condition Assessment Using CSP 1 Matric ApplicationAbstract
The maintenance of a building often causes the waste of much money due to unnecessary or improper building maintenance. Thus, the need for a proper building condition assessment (BCA) is vital to provide a good operating, maintaining and refurbishing of buildings. One of the rating system available to assess the conditions of building structure is the CSP 1 Matrix. This rating system enables surveyor to collect data at a short time possible by giving ratings on the condition of the structure being inspected thus avoiding the conventional longhand descriptive building survey report. To further enhance the available rating system, a software application that utilises the criteria of the CSP 1 Matrix will be developed using the Visual Basic .NET. Index Terms - Building condition, CSP 1-Matrix, dome structure, Visual Basic .NET.
-
Development of Building Condition Assessment System (B-CAS) by Using Visual Basic .NET Application
Asmawan Mohd Sarman, Adi Irfan Che Ani, Elis Mardzianah Mazlan, Mohamed Farhan Mael
Paper ID IA-ICCAEKOTA-10038-7097 · Pages 6-14
Download PDF: Development of Building Condition Assessment System (B-CAS) by Using Visual Basic .NET ApplicationAbstract
Building inspection is traditionally conducted by using descriptive information. These are time consuming, particularly during site inspections. The problem with this method of assessment is that the time needed to write all the defect description on site in addition to translate and analyse descriptive data to presentable information. The development of Condition Survey Protocol (CSP) 1 Matrix has been proven to be effective by researcher as it able to save on-site time during building inspection. Although the result achieved using CSP1 Matrix is considered quick and precise, the system still requires analysis and computation by human hand. To make condition assessment more effective, thus the utilization of computer application must be considered. Using computer application, surveyor will not only able to get result quick and precise, but also can reduce error during computation. This study focuses on the development of Visual basic programming that utilizes CSP1 Matrix to help improve building inspection efficiency. Index Terms - Building condition assessment, CSP 1-Matrix, MySQL, Visual Basic .NET.
-
The Challengers and Sustainability of Total Productive Maintenance (TPM) Implementation in Power Generation Industry: A Case Study in TNB Janamanjung SDN BHD
Salmi Samsudin, Norlena Hasnan, Kamil Nordin Nurzuhdy, Muhammad Nazrin Mohd Zaki
Paper ID IA-ICEBMKOTA-10038-7287 · Pages 15-21
Download PDF: The Challengers and Sustainability of Total Productive Maintenance (TPM) Implementation in Power Generation Industry: A Case Study in TNB Janamanjung SDN BHDAbstract
This case study focuses on the challenges and barriers based on the four factors (1) Human (2) Technology (3) Method and (4) Environment that has been identified in the context of TPM implementation in a Malaysian Power Plant. The purpose of identifying the barriers is to formulating a strategy in enhancing and reviving the TPM implementation for the Case Study Organization (CSO). This research has led to the recommendations in improving the TPM development and implementation program of the case study organization. Findings indicate that although there was a need to integrate the 4 elements, the human factor such as management commitment & participation, rewards & recognition is a priority for TCSO. Index Terms - Total Productive Maintenance, Power Generation, Barriers, Challenges.
-
Development of Money Counting Machine by ARM based Microcontroller
Osama Saadi, Ergun Ercelebi
Paper ID IA-ICRAETKOTA-10038-7446 · Pages 22-26
Download PDF: Development of Money Counting Machine by ARM based MicrocontrollerAbstract
The money counting machine (MCM) is one of the miracles of the science. Different techniques have been used to design and improve the counter machine, range from the simple counter that counts a number of notes with normal speed to high-level counter that utilized image processing to detect the type of currency and its amount in addition to used multiple fake detections and can run in very fast speed. These techniques and devices are highly expensive so just used in some area like banks, exchange office, markets merchant, etc. However, nowadays there is an improvement in design microcontroller unit (MCU) and its application along with it become in low cost, so there is a need to design counter machine based on utilized MCU and sensors. This work aimed to design a low-cost counter machine with fake detection that utilized MCU based ARM Cortex-M4 32 bit. The Teensy MCU version (3.2) as prototype card has been used which has ARM Cortex 32 processor. The mechanical parts that consist of the roller which has rods in a continuous pattern and the roller move these rods with a particular fixed speed. Laser transmitters and receivers have been used to detect notes and start and stop counting in addition to counting each note. The UV sensor has been used as fake notes detector. The counting result has been shown in LCD screen and the system will stop counting if detect any fake note. The results appear a relatively high-speed counting with high accuracy (100%) in counting and fake detection. Keywords - Currency counter, Teensy3.2 microcontroller, Notes counter, UV detector, Cash validation, ARM Cortex M4, Fake Note Detection.
-
Relationship between Economic Pressure and Family Functioning Among B40 Family
Zarinah Arshat, Zanariah Ismail, Mariani Mansor, Zainal Madon, Rosmaria Omar
Paper ID IA-ICSSHKOTA-10038-7094 · Pages 27-30
Download PDF: Relationship between Economic Pressure and Family Functioning Among B40 FamilyAbstract
The aim of this study is to determine relationship between economic pressure and family functioning among low income family. A total of 518 respondents of B40 family residing urban and rural area in Kelantan, Kedah, Negeri Sembilan and Johor were involved in this study. The Economic Pressure instrument was used to assess economic pressure. Malaysian Family Strengths Scale was used to measure family functioning. Finding generally shows that there was a negative and significant correlation between economic pressure and family functioning. This study implies that high level of economic pressure will result low level of family functioning. Keywords - Economic pressure, family functioning, B40 family
-
Preparation and Characterization of The Sputtered TIALN Coatings Using A Ti-Alalloy Metal Target
Ji-Seon Kwon, Jae-Woong Choi, Chang-Hyun Lee, Tae-Woo Kim, Seong-Cheol Choi, Hwa-Min Kim
Paper ID IA-ICSTMKOTA-10038-7056 · Pages 31
Download PDF: Preparation and Characterization of The Sputtered TIALN Coatings Using A Ti-Alalloy Metal TargetAbstract
Titanium aluminium nitride (TiAlN) ternary coatings were deposited on glass substrates by means of reactive magnetron sputtering technique, using a Ti-Al alloy metal target (Ti0.5Al0.5). The depositions were performed at various N2 and Ar flux ratios of N2/(Ar+N2)= 33, 50, 67, 83%. The structure, morphology, chemical composition and mechanical properties were investigated by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), energy dispersive X-ray spectroscopy (EDS), and nano indenter (MTS System), respectively. The orientation of coatings depends on the flux ratios of N2/(Ar+N2) and substrate temperature. The coatings deposited with N2/(Ar+N2) ratios of 33, 50 at.% consists of pyramid- like column grains separated by porous and voids, which can be attributed to cubic-TiN (220) preferred orientation. The coatings deposited with N2/(Ar+N2) greater than 67% exhibits the phase of hexagonal-AlN and cubic-TiN. The surface of coatings becomes more compact and smoother with the N2/(Ar+N2) ratios increase. The coatings deposited with N2/(Ar+N2) ratio of 83% shows the largest hardness of 21.5GPa, which is attributed to the preferred (200) orientation. However, this hardness increases significantly with increasing substrate temperature. The coatings deposited at more than 100℃ exhibited the (111) and /or (200) orientation. The amounts of grains grown along the (111) and (200) orientations play a significant role on the mechanical performance of TiAlN coatings. Four independent mechanisms, such as TiAlN stoichiometry and lattice parameter, the (111) preferred growth orientation, and the density increase (elimination of void), were found to contribute to the enhancement of TiAlN mechanical performance