Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

IASTEM INTERNATIONAL CONFERENCE, Mexico City, Mexico 28-06-2018

← All proceedings

Proceedings cover: IASTEM INTERNATIONAL CONFERENCE, Mexico City, Mexico 28-06-2018

IASTEM INTERNATIONAL CONFERENCE

Mexico City, Mexico 28-06-2018

2 papers

  1. Statistical Analysis of The Reproducibility of The Standard Penetration Test: A Case Study

    Vinicius R Domingues, Bernardo C P E Albuquerque, Darym J Ferrari De Campos, Luan C S M Ozelim

    Paper ID IA-ICCAEMXCO-28068-8824 · Pages 1-4

    Abstract

    One of the most widespread survey methods of geotechnical investigation is the Standard Penetration Test - SPT. Although this test is regulated by standards in several countries, even the standardized methodology may lead to highly variable data. In this case, the data variability is not caused by sampling different stratigraphic horizons; it is caused by disturbances of three other sources, namely: human, equipment and procedure. This research, based on a case study and in a statistical analysis, isolate the influence of soil properties to clarify the relevance of these other variability sources. The analysis, based on Bootstrap resampling method, considers 8 SPT surveys executed by the same workers using the same equipment and on a pre-established soil profile. As part of the paper methodology, each blow was monitored for its height and impact velocity with a high-speed camera and a topographical target. It was possible to note that, despite the standardizations described, the data are significantly different. In the sample studied, the energy transmitted to the soil is statistically higher than the Standardized one. Consequently, parameters of soil resistance might be underestimated and, thus, engineering solutions might become more expensive than necessary. Therefore, the results show that the use of SPT may not be sufficient, depending on the risk to be assumed by stakeholders. Index Terms- Bootstrap, Reproducibility of SPT, Risk in engineering, Statistical Analysis.

    Download PDF: Statistical Analysis of The Reproducibility of The Standard Penetration Test: A Case Study
  2. Robust GPI Controller for Trajectory Tracking in A 3rps Parallel Robot

    Andrés blanco-ortega, Norma c. Ruiz-hidalgo, Jorge colin-ocampo, Arturo abúndez-pliego, Wilberth alcocer-rosado

    Paper ID IA-ICRAETMXCO-28068-8426 · Pages 5-10

    Abstract

    Parallel robots have the advantages of handle heavy loads, high rigidity, low inertia and higher accuracy. These robots have been used in applications of motion simulators, machine-tools, fine positioning devices, haptic devices, 3D printers, part handling and spot welding among others. In this paper a configuration of a revolute-prismatic-spherical (RPS) parallel robot with different orientations of the actuators, with respect to other parallel robots reported in the literature, is presented. Robust GPI controller is proposed for trajectory tracking to position the mobile platform in a desired orientation. The simulation results show how the controller is able to compensate non-modeled system disturbances as well as external disturbances. Index Terms- GPI control, parallel robot, 3 RPS mechanism.

    Download PDF: Robust GPI Controller for Trajectory Tracking in A 3rps Parallel Robot