Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

137TH IASTEM INTERNATIONAL CONFERENCE, Melbourne, Australia 06-09-2018

← All proceedings

Proceedings cover: 137TH IASTEM INTERNATIONAL CONFERENCE, Melbourne, Australia 06-09-2018

137TH IASTEM INTERNATIONAL CONFERENCE

Melbourne, Australia 06-09-2018

7 papers

  1. Analysis of Connector Bridge Column that Connecting Two Multistory Building

    Andre Feliks Setiawan, Mulyadi Wiguna Selamet

    Paper ID IA-ICCAEMLBN-06098-8872 · Pages 1-6

    Abstract

    Concrete is the most widely used construction material in the world and the main use of concrete in construction industry has more advantages compared with other materials. Nowadays, many multistory buildings are being built using concrete materials. Sometimes the neighboring multistory buildings need bridge as connector to transport people or commodities. Indonesia is located in an earthquake zone, so that such connector-bridge linking two neighboring buildings must be strong and safe during and after an earthquake. The main objective of this research is to analyze the columns of the bridge which are connected with two different bridges structure system. The first bridge (building model-1) is designed with using column-beam system with masonry-wall, while the second bridge (building model-2) is designed with using deep beam system. Structural design of this building is designed according to National Standards of Indonesia SNI 1726:2012 by using equivalent static analysis and response spectrum analysis. From the comparison of result analysis for both of the building can be concluded that bridge of building model-2 have a better result than bridge of building model-1. It is because building model-2 has a better behavior and the deep beam which is using in connector bridge for building model-2 work effectively to reduce axial force, shear force, and bending moment in bridge column. Index Terms – Multistory building; bridge; column-beam system bridge; deep beam system bridge

    Download PDF: Analysis of Connector Bridge Column that Connecting Two Multistory Building
  2. Towards Effective Large-scale Real-time Control Scheme: Structural Identification of a High-Reynolds Number Turbulent Boundary Layer via Wall Sensors

    Rasiye Beigzadeh, M. B. Abbassi, M. R. Abbassi

    Paper ID IA-ICCARVEMLBN-06098-9129 · Pages 7-10

    Abstract

    The large-scale coherent structures in the outer region of a high-Reynolds-number turbulent boundary layer are highly energetic and have an influence on the wall and hence on the skin friction drag. To evaluate the accuracy of the structural manipulation for large-scale real-time control schemes, in which wall sensors are utilized as control components, the canonical effect of the outer-region structures onto the wall needs to be quantified. We conducted measurements of friction velocity fluctuations (u_τ), together with simultaneous measurements of streamwise velocity (u) fluctuations throughout a turbulent boundary layer with a friction Reynolds number of〖Re〗_τ≈14400. The streamwise locations for both of the measurements of theuand u_τ fluctuations were nominally the same. The coherence magnitude between the former and latter signals is evaluated as a function of the wall-normal height and the resolved streamwise wavelength. It is concluded that the most influential large-scale structures in the log-region of a high-Reynolds-number turbulent boundary layer on the wall-shear stress possess a characteristic lower bound of a streamwise wavelength of λ_x≈1.9δ (where δ is the boundary layer thickness). Index Terms - Turbulent boundary layer, Coherent structures, High-Reynolds-number, Large-scale control scheme.

    Download PDF: Towards Effective Large-scale Real-time Control Scheme: Structural Identification of a High-Reynolds Number Turbulent Boundary Layer via Wall Sensors
  3. Role of Arbuscular Mycorrhiza in Heavy Metal Tolerance in Sweet Basil Plants

    Amal Aboul-Nasr, Soraya Sabry, Mayada Sabra

    Paper ID IA-ICENSMLBN-06098-8042 · Pages 11-16

    Abstract

    The effects of phosphorus amendments and arbuscular mycorrhizal (AM) fungi Glomus intraradices on the sweet basil (Ocimum basilicum L.), chemical composition and percent of volatile oil, and metal accumulation in plants and its availability in soil were investigated in field experiment at two seasons under contaminated soil with Pb and Cu. The content of essential oil and shoot and root dry weights of sweet basil were increased by the application of mineral phosphorus as compared to control. Inoculation with AM fungi reduced the metal concentration in shoot, recording a lowest value of (33.24, 18.60 mg/kg) compared to the control (47.58, 23.70 mg/kg) for Pb and Cu, respectively. Availability of Pb and Cu in soil were decreased after cultivation in all treatments compared to control. However, metal root concentration increased with the inoculation, with highest values of (23.44, 39.25 mg/kg) compared to control (25.85, 34.34 mg/kg) for Pb and Cu, respectively. The content of linalool and methyl chavicol in basil oil was significantly increased in all treatments compared to control. We can thus conclude that the AM-sweet basil symbiosis could be employed as an approach to bioremediate polluted soils and enhance the yield and maintain the quality of volatile oil of sweet basil plants. Index Terms - Arbuscular mycorrhizal fungus, heavy metals, sweet basil, oil composition

    Download PDF: Role of Arbuscular Mycorrhiza in Heavy Metal Tolerance in Sweet Basil Plants
  4. In-Vitro Propagation of Stevia Rebaudiana (Bertoni) Bertoni (Asteraceae)

    R.M. Dharmadasa, Vinuri De Silva1, L.P.J. Seneviratne, Ranasinghe P

    Paper ID IA-ICSTMLBN-06098-9474 · Pages 17-19

    Abstract

    Stevia rebaudiana (Bertoni) Bertoni is a medicinal plant native to South America, which produces diterpene steviol glycosides which are low calorie sweeteners, about 300 times sweeter than sucrose. Even though, this plant has an immense potential to be used in Sri Lanka, it has not been introduced yet due to various reasons. The main objective of the present study is to find out an optimum protocol for in-vitro propagation of Stevia rebaudiana. Explants were collected from authenticated mother plants maintained in the green house. Nodal explants were surface sterilised using different concentrations of CloroxR. Culture establishment and shoot multiplication were performed in Murashige and Skoog medium (MS) supplemented with different concentrations and combinations of BA and IBA. In vitro rooting of shoots were tested using different concentrations and combinations of IBA and charcoal. Data were analysed using ANOVA in SAS statistical package. Results exhibited that the optimum surface sterilization method for Stevia rebaudiana is 15% clorox for 15 minutes. MS medium supplemented with 0.5mg/L IBA and 2mg/L BA, exhibited the best shoot proliferation rate. Itcan be sub cultured up to four sub cultures without any significant decline in the number of shoots produced per plant. The optimum rooting was observed in MS medium supplemented with 0.1% charcoal and 1mg/L IBA. Rooted plantlets were successfully allimatied with 85% success rate. Index Terms - In-vitro propagation, Stevia rebaudiana, Nodal explant, MS medium, Large scale production

    Download PDF: In-Vitro Propagation of Stevia Rebaudiana (Bertoni) Bertoni (Asteraceae)
  5. In-Vitro Propagation of Stevia Rebaudiana (Bertoni) Bertoni (Asteraceae)

    R.M. Dharmadasa, Vinuri De Silva1, L.P.J. Seneviratne, Ranasinghe P

    Paper ID IA-ICSTMLBN-06098-9474 · Pages 17-19

    Abstract

    Stevia rebaudiana (Bertoni) Bertoni is a medicinal plant native to South America, which produces diterpene steviol glycosides which are low calorie sweeteners, about 300 times sweeter than sucrose. Even though, this plant has an immense potential to be used in Sri Lanka, it has not been introduced yet due to various reasons. The main objective of the present study is to find out an optimum protocol for in-vitro propagation of Stevia rebaudiana. Explants were collected from authenticated mother plants maintained in the green house. Nodal explants were surface sterilised using different concentrations of CloroxR. Culture establishment and shoot multiplication were performed in Murashige and Skoog medium (MS) supplemented with different concentrations and combinations of BA and IBA. In vitro rooting of shoots were tested using different concentrations and combinations of IBA and charcoal. Data were analysed using ANOVA in SAS statistical package. Results exhibited that the optimum surface sterilization method for Stevia rebaudiana is 15% clorox for 15 minutes. MS medium supplemented with 0.5mg/L IBA and 2mg/L BA, exhibited the best shoot proliferation rate. Itcan be sub cultured up to four sub cultures without any significant decline in the number of shoots produced per plant. The optimum rooting was observed in MS medium supplemented with 0.1% charcoal and 1mg/L IBA. Rooted plantlets were successfully allimatied with 85% success rate. Index Terms - In-vitro propagation, Stevia rebaudiana, Nodal explant, MS medium, Large scale production

    Download PDF: In-Vitro Propagation of Stevia Rebaudiana (Bertoni) Bertoni (Asteraceae)
  6. Estimating the Influence of Different Commercial Crops on Rural Wastewater Treatment in Horizontal SSF Constructed Wetland

    Raana Fahim, Xiwu Lv, Ittehad Hussain

    Paper ID IA-ICENSMLBN-06098-9379 · Pages 20

    Abstract

    HSSF-CW planted with different vegetation is considered to be a suitable solution for rural domestic wastewater treatment. CW does not only provide a clean environment, but also biodiversity andappropriate soil sanitation. In addition, it can be utilized for production of biomass which could be processed to food, fodder, fuel, medicines, etc. In this study, four plant species were selected according to their specific economic value. Those areIpomea aquatic (vegetable), Oryza Sativa (field crop), Iris Pseudocorus (herb) and Canna indica (versatile crop). In order to compare the effects of selected species, they were cultivated in five HSSF-CWs. In four HSSF-CWs species were cultivated separately while in fifth one they were mixed. The experiment results indicated: (i) mixed vegetation was highly efficient in the removal of all pollutants; (ii) IpomoeaAquatica showed good performance in removal of TN, TP, NH4-N, and NO3-N with removal rate of 76.9%, 94.8%, 90.5% and 75.7%, respectively; (iii) Iris and Canna had significantly better results in FC and TSS reduction with removal rate of 76% and 67%, respectively; (iv) Oryza sativa had average removal rate for all parameters. During the experiment every plant has achieved its maximum yield rate what resulted in large biomass production. This study has confirmed that HSSF-CW coupled with the selected plants possess strong ability to treat wastewater, and has significant economic benefits through biomass production. Index terms - HSSF-CW; wastewater; TP; TN; NH4-N, NO3-N, TSS; FC; biomass

    Download PDF: Estimating the Influence of Different Commercial Crops on Rural Wastewater Treatment in Horizontal SSF Constructed Wetland
  7. Educational Reform and Educational Equality in Mongolia

    Tselmeg Otgonbayar, Yanjindulam Batsaikhan, Carol Troy

    Paper ID IA-ICSSHMLBN-06098-9658 · Pages 21

    Abstract

    Recent reforms to the Mongolian school systemhave been driven by two competing goals: educational equality and modernization. Equality, a basic principle in the reform movement, is crucially important to residents of pastoral and nomadic areas, a historically underserved population. Educational equality must be weighed against a second goal, the need to modernize the school system and bring it into compliance with international norms. The modernization effort has taken place along several fronts. Between 2004 and 2017, compulsory schooling expanded from 10 to 12 years. The Second Educational Master Plan (SEMP) rebuilt equipment and infrastructure and raised teaching standards. The 2012 Mongolia-Cambridge Education Initiative (MCEI 2012) established a network of elite schools to promote the sciences and English language proficiency, thereby making Mongolian education globally competitive. On the other hand, equality and modernization present tradeoffs. Because of long-standing structural problems, such as the geographic isolation of the Mongolian countryside, poverty, and extreme weather conditions, there is a risk that the benefits of initiatives like SEMP and MCIE 2012 will accrue disproportionately to urban residents. This paper presents a 2014 survey assessing perspectives on the ECP educational reforms among 1,901 Mongolians, including 1,218 city dwellers and 683 residents of the countryside. We compare the responses of the city and country residents on seven dimensions: the physical adequacy of the learning environment, the school system’s ability to serve special needs students; the modernization of classroom teaching and administration; the implementation of major projects by the Ministry of Education, Culture, and Science; the ethics of teachers and administrators; the availability of textbooks; and the overall performance of the government in education. Implications for the future of the ECP reforms are discussed.

    Download PDF: Educational Reform and Educational Equality in Mongolia