Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

IASTEM INTERNATIONAL CONFERENCE, Colombo, Sri Lanka 16-11-2018

← All proceedings

Proceedings cover: IASTEM INTERNATIONAL CONFERENCE, Colombo, Sri Lanka 16-11-2018

IASTEM INTERNATIONAL CONFERENCE

Colombo, Sri Lanka 16-11-2018

2 papers

  1. Bottom Ash Based Geopolymer Concrete Paver Blocks

    V. Revathi, K. S. Elango, R. Kalaimani

    Paper ID IA-ICCAECOLMB-16118-8946 · Pages 1-6

    Abstract

    A study on bottom ash based geopolymer concrete (BAGPC) for paver block was attempted in the present work. Bottom ash was used as the source material. The alkaline liquid was a combination of sodium silicate and sodium hydroxide. Optimum mix design for M30, M35, M40, M50 and M55 grade were arrived based on alkaline liquid to solids ratio, molarity of sodium hydroxide and curing mode. Properties such as compressive strength, split tensile strength, flexural strength, water absorption and abrasion resistance of BAGPC paver block was determined. Further, durability studies on bottom ash geopolymer mortar were carried out against chemical resistance. The results showed that lower grade BAGPC paver block had attained required strength at the age of 3 days under ambient curing mode while higher grade BAGPC paver block achieved at the age of 28 days under heat curing mode. The water absorption of BAGPC paver block was lower for all the grades. It was also found that BAGPC paver block had excellent resistance against abrasion and chemical environment. Index Terms— bottom ash, geopolymer concrete, paver blocks, abrasion resistance, chemical resistance

    Download PDF: Bottom Ash Based Geopolymer Concrete Paver Blocks
  2. Passive Control Application Using TMD in Bridge-Vehicle Interaction

    Saidi Abdelkrim, Fali Leyla, Bousserhane Ismail Khalil, Hamouine Abdelmadjid

    Paper ID IA-ICCAECOLMB-16118-10289 · Pages 7-10

    Abstract

    In recent years, several control devices have been developed to control the vibrations of the structures. Between these innovative control devices, we can distinguish three different approaches: passive, active and semi-active control; to these we can add a fourth which is the hybrid control. Among these devices, Tuned Mass Dampers (TMD) are increasingly used in different fields of application in civil engineering, such as buildings and bridge. In this paper, an integration of a passive control system based on Tuned Mass Dampers in the coupled system of vehicle-bridge interaction is presented, using a formulation of the motion equations by the Finite Element Method(FEM) of a simply supported beam model of Timoshenko attached with (n) TMD fixed on a half-car model. In the resolution methods we applied a numerical simulation based on the MATLAB/Simulink.The numerical simulation results of the controlled system will be compared with those of the uncontrolled structure. Index Terms— Bridge-vehicle interaction, Dynamic load, Passive control, Tuned mass damper, Vibration suppression.

    Download PDF: Passive Control Application Using TMD in Bridge-Vehicle Interaction