Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

158TH IASTEM INTERNATIONAL CONFERENCE, Dubai, UAE 26-12-2018

← All proceedings

Proceedings cover: 158TH IASTEM INTERNATIONAL CONFERENCE, Dubai, UAE 26-12-2018

158TH IASTEM INTERNATIONAL CONFERENCE

Dubai, UAE 26-12-2018

11 papers

  1. Design of Optimized PIC beam with K-NN Classification

    Seok Woo Ham, Jae Ung Cho, Nam Hoon Kim, Bum Seok Oh, Seong S. Cheon

    Paper ID IA-ICMAEDUBI-26128-002 · Pages 1-4

    Abstract

    In the present study, design optimisation of PIC beam undergoing bending was carried out with the help of K-NN classification based on the triaxiality which is able to suggest dominant loading types in regions, i.e. tensile, compressive or shear. After K-NN classification, beam regions are divided into three parts, i.e., tension dominant, compression dominant and shear dominant. Composites are stacked for each region by robust sequences, which was investigated by previous study. The optimised PIC beam showed excellent load resisting capability as well as energy absorption during three-point bending. Index Terms - Composite beam, K-NN classification, piecewisely-integrated composite (PIC), triaxiality.

    Download PDF: Design of Optimized PIC beam with K-NN Classification
  2. Performance Enhancement of Material Removal Rate by Using Cryogenic Treatment on Zinc Coated Diffused Brass Wire in Wire-Cut EDM Process

    Kultar Singh, Sandeep Singh

    Paper ID IA-ICMAEDUBI-26128-10390 · Pages 5-10

    Abstract

    The effect of cryogenic treatment of wire has been studied on material removal rate obtained by wire electrical discharge machining (WEDM). Two different wires have been used under the same input parameters. One wire was cryogenically treated and the other was simple and without any cryogenic treatment. AISI D3 die steel was used as work piece material. The performance of wires has been measured in terms of obtained material removal rate. Optimum set of input parameters for maximum material removal rate has also been determined. It is found that the cryogenically treated wire produces more material removal as compared to non-cryogenically treated wire for same material. Key Words - Wire EDM, Material removal rate, Cryogenic Treatment, Optimization.

    Download PDF: Performance Enhancement of Material Removal Rate by Using Cryogenic Treatment on Zinc Coated Diffused Brass Wire in Wire-Cut EDM Process
  3. Steel Work Design and Analysis of a 2-Wheeled Scooter

    Nwadike Emmanuel Chinagorom, Okafor Christian, Obika Echezona Nnaemeka, Azaka Onyemazuwa Andrew

    Paper ID IA-ICMAEDUBI-26128-10629 · Pages 11-15

    Abstract

    This motorized Two-wheel scooter is specifically designed for low speed, and hence is more suitable for short distance commute. It incorporates a mild steel frame which houses the transmission mechanism. This transmission system in its self is a motor- chain-sprocket assembly: a 350w DC motor powered by a 24v, 18A battery generates sufficient torque which is transmitted by a 16 toothed sprocket through a chain comprising of 64 links to a rear sprocket (22 teeth) attached to the rear wheel. On either side of the handle bar is the brake lever (left) and speed controller (right) for ease of navigation. The stress analysis reviled that the maximum stress induced on the frame due to design load is 49.156N/m2. The maximum design load of this scooter is 686.7N, and from the graph analysis the scooter travels at a maximum velocity of 0.51m/s. The graph also reviled that the velocity of the scooter is inversely proportional to the load. Similarly, the discharge rate of the battery increases as the load is increased. Also, the scooter velocity is directly proportional to the rate of battery discharge. The continuous working time of the battery is 40min at rated load and normal working condition. Keyword; Scooter, electric vehicle, design, velocity, motorize, wheel.

    Download PDF: Steel Work Design and Analysis of a 2-Wheeled Scooter
  4. A Systematic Study of the Genus Merremiadissecta (Jacq.) Hallier F.in Iraq

    Aseel K. Al Anbari

    Paper ID IA-ICMBPSDUBI-26128-10097 · Pages 16-20

    Abstract

    A critical taxonomic study of the genus Merremiadissecta (Jacq.)Hallier f. in Iraq. The present revision treats with taxonomic determinations based on a phenological characteristics, leaf anatomy, and palynologicalstuded by light microscope and scanning electron microscope, the results showed that climber plant with lobed leaf, cymose flower, and capsule fruit, anatomic study notes Bifacial leaf, paracytic stomata on abaxial and adaxial surface, with cross section of blade and margin, homogeneous cells composed of parenchyma cells in midrib, circular petiole, containing anguler collenchyma with cortex surrounded one central vascular bundle and two lateral bundles, palynology study by light microscope appears pollen grain monad, , radial symmetry and isopolar, tricolporate, medium in size, while the study of the scanning electron microscopy has shown that the surface decoration in a small grid microreticulate. This research could be provided a taxonomical key for Merremiadissecta plant in Iraq. Keywords - Merremiadissecta, Merremia Iraq, SEM systematic studyز

    Download PDF: A Systematic Study of the Genus Merremiadissecta (Jacq.) Hallier F.in Iraq
  5. Anatomical Study for Caraway (Carumcarvi l.) Plant

    Muazaz Azeez Hasan Al-Hadeethi

    Paper ID IA-ICMBPSDUBI-26128-10105 · Pages 21-26

    Abstract

    Study of anatomical features of caraway consider the first one in Iraq,because of very rare planting in it. The study appear newer design of arrangement the tissue in the parts of caraway plant like as arrangement the sclerenchyma tissue as wide grouped in the cortex of root and stem, also the located of oil cavities near the phloem tissue in the root and stem also. So the vascular bundles in the cross section of stem gives a mazing shape when can show the bundle cup fiber and phloem like as the teardrop form stick in the heart shape of xylem. Epidermis of leaf and stem consist of stomata, the type of stomata in the stem paracytic type and in the leaf anomocytic type also appear the prismatic crystals dendroid crystals in the epidermis of leaf, leaves are bifacial type with two layers of palisade cells and 4-5 layers of spongy cells. The cross section of petiole polygonal shape and the sclerenchyma layers located on the corner of petiole and appear as grouped wide and oval to elongated in shape, the vascular bundles open and collateral give the V-shaped in cross section consist from the xylem and phloem and covered by bundle cup fiber and the parenchymal bundle sheath surrounded the vascular bundle from the outer, also the oil ducts distributed in the cortex, the pith is hollow. Key words - Caraway plant, anatomy, Apiacea.

    Download PDF: Anatomical Study for Caraway (Carumcarvi l.) Plant
  6. Human Rights in the Middle East, Progress and main Challenges

    Majid Bozorgmehri

    Paper ID IA-ICSSHDUBI-26128-10719 · Pages 27-31

    Abstract

    For decades, "human rights in the Middle East" was a subject of scrutiny, debate, and mobilizations spearheaded from outside of the region. Most of the literature on human rights in Middle East has focused almost exclusively on women rights, the theoretical debate on the relations between Islam and human rights, and the Palestinian right for self-determination. Of course these are important concerns but they should not be the only ones. Economic, social, civil and political rights within the Middle East states are also important as the current wave of rebellions in the region demonstrates. As our main question in the paper, we are targeting the main challenges facing the human rights statue in the Middle East and we try to illustrate the achieved progress. In the paper, a context analysis is conducted, adopting an Area Studies Approach to identify the major features of a Middle Eastern context where human rights norms experience the region’s realities. Key words - Middle East. Human Rights. Islam. Women rights.

    Download PDF: Human Rights in the Middle East, Progress and main Challenges
  7. Effects of 2.45 GHZ Microwave Frequency on The Total Oxidant and The Total Antioxidant Capacity and Oxidative Stress Index in Wistar Albino Rats

    Metin Çenesiz, Ayşegül Akar, Ercan Karabulut, Sena Çenesiz

    Paper ID IA-ICMBPSDUBI-26128-10268 · Pages 32

    Abstract

    Aim - The aim of this study was to evaluate the effect of 2.45GHz Microwave (MW) frequency on total oxidant capacity (TOC), total antioxidant capacity and oxidative stress index (OSI) in Wistar albino rats. Material and Methods - Twenty-two adult male Wistar albino rats, with a mean body weight of 378 ±36 g. were randomly divided into two groups: Study group (n=11) and control group (n=11). Rats in the study group were exposed to 2.45 GHz MW radiation (11.96±0.89 V/m), for 2 hours each day for 21 days. Control group rats were housed, no exposed MW radiation, in different room from study group. The TOC, the TAC and the OSI were measured. Result - The TOC value of the study group was higher than control group (p

    Download PDF: Effects of 2.45 GHZ Microwave Frequency on The Total Oxidant and The Total Antioxidant Capacity and Oxidative Stress Index in Wistar Albino Rats
  8. Determination of Acute Phase Protein Levels in Cattle with Paratuberculosis

    Utku Duran, Sena Cenesiz

    Paper ID IA-ICMBPSDUBI-26128-10722 · Pages 33-36

    Abstract

    Aim - Paratuberculosis leads to economic losses due to loses body weight, decrease in milk yield and fertility problems. Diagnosis of this disease is of great importance for both economic and public health. However, there is a definite method for the diagnosis of this disease. In this study, serologically in tagged paratuberculosis in cattle detection of acute phase proteins from serum haptoglobin (Hp) , Serum amyloid-A (SAA), ceruloplasmin (Cp), C-reactive protein (CRP), albümin (alb) and total protein (TP) is intended to identify changes in the level. Material and Method: In study, 30 paratuberculosis positive cattle formed test group and 30 healthy cattle formed control group. Serologically diagnosis for paratuberculosis used ELISA (IDEXX Paratuberculosis screenging ab test). SAA, Hp, CRP, Cp, albumin and Tp of acute phase proteins level were measured for each blood sample for all of groups. Results: All analysis of results showed that SAA (p

    Download PDF: Determination of Acute Phase Protein Levels in Cattle with Paratuberculosis
  9. Contribution of Distributive Leadership to Succession Planning and Capacity Building

    Amber Noor Mustafa, Syed Ibrahim Mustafa Gillani

    Paper ID IA-ICSSHDUBI-26128-10839 · Pages 37-44

    Abstract

    Succession planning and capacity building, in organizations, have been topics of interest in the research world for many years. How any organization copes with turnover of staff and the impact of this phenomenon on the performance of the organisation have intrigued researchers for a long time. The purpose of this study is to explore some of the different variables that influence capacity building in organisations, with context of a school. It questions the importance of a leader’s role in this matter. The study aims to figure out the relationship, if any, of distributive leadership and capacity building in schools. In other words it aims to answer the question, how distributive leadership contributes to succession planning and capacity building in schools? It also attempts to explore how this phenomenon affects the performance, culture and morale of the school and its staff. The study explores various dimensions of this topic, especially the need to develop creative leadership teams to cater to capacity building and succession planning.The exploration with an interpretivist inclinationis carried out through discourse analysis, non-participant observations and interviews. Observation and interview of the heads of schools are taken while focused group sessions in the shape of semi- structured interviews are conducted for the teachers. Three schools are included in the research, one elite private school, the second one, an army run school while the third, a public school run by an NGO. This ensures triangulation of information from various contexts and therefore helps identification of conclusions from different lenses. The participating teachers are from the same section of the various schools, i.e. students of ages 11 to 13 years of age (Middle schools). The true essence of distributive leadership is found to be somewhat missing and the need to spread leadership amonst the various tiers in a school is felt throughtout the course of the research.

    Download PDF: Contribution of Distributive Leadership to Succession Planning and Capacity Building
  10. A Deep Learning Approach to Software Clone Detection

    Doaa Shawky

    Paper ID IA-ICRAETDUBI-26128-10626 · Pages 51-54

    Abstract

    A code clone is a code segment that is similar to another one based on a certain similarity measure. Clones appear as a result of the common programming practice of “copy and paste”. However, cloned codes can cause serious problems in software maintenance and upgrading efforts. In addition, they are –sometimes-a sign of poor design. This paper presents an approach for predicting clones in open-source software systems based on the two commonly adopted approaches in deep learning; namely transfer learning and long short-term memory (LSTM) networks. A pre-trained LSTM deep network for text classification is used to extract the relevant features of similar code segments in open source systems. Then a support vector machine classifier is used to classify the clones using the extracted features. Experimental results show that the two employed techniques can predict similar code clones of the used systems with good accuracy, which indicates that the used pre-trained network can detect structural similarity that exists among code clones. Index Terms - Code clones detection, deep learning, long short-term memory networks, and transfer learning,

    Download PDF: A Deep Learning Approach to Software Clone Detection
  11. Solubility Enhancement of Curcumin by Solid Nanoemulsifying Drug Delivery System

    Rashmi V. Trivedi, Neha S. Raut, Milind J. Umekar

    Paper ID IA-ICMBPSDUBI-26128-002 · Pages 55

    Abstract

    The present investigation was carried out with the aim to enhance aqueous solubility, dissolution and improve bioavailability of curcumin through the solid nanoemulsifying drug delivery system. The nanoemulsion was prepared by the high pressure homogenization method, using oil phase comprising of Soyabean oil, Tween 80 and Polyethylene glycol 400. The globule size, zeta potential and pH of prepared nanoemulsion was found to be 76.27nm, -16 mV, and pH 7.4 respectively. TEM studies revealed that the droplets were of size smaller than 200 nm and spherical. The release kinetic studies showed that the drug release followed Korsemeyer- peppas model. The ‘n’ value for curcumin nanoemulsion was found to be 1.0261; exhibiting non fickian diffusion super case II. Further, the formulated nanoemulsion was converted in to solid nanoemulsifying delivery of curcumin by adsorbing it on Neusilin and Fujicalin. Solid nanoemulsifying delivery system of curcumin along with Eudragit 100 LR, PVP K 30 was compressed into tablets. The invitro release studies exhibited increased release of curcumin from the formulated nanoemulsion (81.72%) and solid nanoemulsifying system of curcumin (98.32%) as compared to Curcumin (75.65%). Thus, the solid nanoemulsifying system of curcumin seems to be promising for increasing the solubility and bioavailability of curcumin. Keywords - Curcumin, Nanoemulsion, Solid Nanoemulsifying drug delivery system, Solubility

    Download PDF: Solubility Enhancement of Curcumin by Solid Nanoemulsifying Drug Delivery System