160TH IASTEM INTERNATIONAL CONFERENCE
Istanbul, Turkey 20-12-2018
27 papers
-
Effect of Compositional Parameter on Mechanical Properties of Self-Compacting Concrete Based of Ground Dune Sand
Makani A., Benmerioul F., Zaoiai S., Tafraoui A.
Paper ID IA-ICCAEISTN-20128-10035 · Pages 1-5
Download PDF: Effect of Compositional Parameter on Mechanical Properties of Self-Compacting Concrete Based of Ground Dune SandAbstract
The Self-compacting concrete (SCC) are a new family but also a new technological step in the field of Civil Engineering. This new technique has gradually developed in Europe and is now established as a support technique that will eventually replace the conventional technique of concrete vibrated in many applications. However, this development can only be achieved with some support tools as new characterization tests requiring new equipment to job rules adapted to their specificities. The characteristics of the SCC are directly related to their composition, namely cement, aggregates and water. The research work is therefore to carry out a comparison in terms of mechanical performance between different SCC based formulations Ground dune sand (GDS) to find the optimal ratio of water on cement (W/C). This study showed that the use of GDS, as an addition, in the composition of SCC contributes to a slight variation of the parameters of workability fresh still remaining in the area of SCC required by AFGC recommendations. Thus, the mechanical properties of SCC are inversely proportional with the W/C ratio, the mechanical strengths of SCC increased with the decrease of W/C (interesting values, 55 MPa for the compression W/C = 0 4). Finally, we can conclude that our results provide evidence mechanical performance for dune sand development prospects in the new concrete, namely the SCC. Index Terms - Self-Compacting Concrete, Ground Dune Sand, W/C Ratio, Formulation, Mechanical Performance.
-
The Formulation of New Concrete from Sand Dune of the Western Erg of Algeria
A. Tafraoui, N. Seghouani
Paper ID IA-ICCAEISTN-20128-10433 · Pages 6-13
Download PDF: The Formulation of New Concrete from Sand Dune of the Western Erg of AlgeriaAbstract
The southern Algeria is known for its huge sand dunes that cover part of its territory (Sahara). This sand has features that allow a glimpse of a recovery in the construction field in the form of Ultra High Performance Concrete (UHPC). This type of concrete using a large amount of silica fume, ultra fine addition that gives very high performance but is also relatively rare and expensive. Replacing it with another addition to equivalent properties,such as metakaolin, can also be considered. The objective of this study is to both enhance the sand dunes of Erg south west western Algeria but also reduce manufacturing costs of Ultra High Performance Concrete to incorporating metakaolin to instead of silica fume. Performances to determine mechanical performance are instantaneous, compression and bending. Initially, we characterized the Algerian sand dune. Then, we have to find a formulation of UHPC, adequate in terms of implementation and to replace silica fume by metakaolin. Finally, we studied the actual value of the sand dune. Concrete obtained have very high mechanical performance, up to a compressive strength of 250 MPa, a tensile strength of 45 MPa by bending with the method of heat treatment. This study shows that the enhancement of dune sand studied is quite possible in UHPC, and in particular UHPC bundles and the replacement of silica fume by metakaolin do not alter the properties of these concretes. Keywords - Ultra High Performance Concrete in, sand dune, formulations, silica fume, metakaolin, strength.
-
The Digital Investigation on the Behavior of a Composite Material’s Structure is Requested by an Effort Type '' Shock ''
Tab Bounoua, Djermane Med, Bekkar Izzeddine
Paper ID IA-ICCAEISTN-20128-10494 · Pages 14-17
Download PDF: The Digital Investigation on the Behavior of a Composite Material’s Structure is Requested by an Effort Type '' Shock ''Abstract
numerous studies are already made in the field of fast dynamic, which is expressed in our case by solicitation of impact that is still relevant. Various difficulties associated with the solicitation of shock are just added to us in studying the problems of composite materials, including their homogenization or characterization. For this purpose, our present investigation is concerned with the study of the influence of the impact plates in the composite material. For this, calculation software was used and the chosen structure is sandwich plates. The Characterization tests were performed have then allowed to complete the data required for various applications made. The obtained results are Index Terms - Shock, Sandwich Plate, distortion
-
Overview of Methods for Patient Positioning in Radiotheray Using Positioning Phantoms
Aleksei E Zhdanov, Leonid G. Dorosinsky
Paper ID IA-ICCARVEISTN-20128-10800 · Pages 18-22
Download PDF: Overview of Methods for Patient Positioning in Radiotheray Using Positioning PhantomsAbstract
In this article, we performed the daily check process of any VERO radiation device. We used different positioning method to position several phantoms and we checked their work functionality. Then we used pelvic phantom to check the accuracy of the registration algorithm in terms of using bony anatomy information or artificial markers positions as a reference for the registration process. Index Terms - About four key words or phrases in alphabetical order, separated by commas.
-
BINAR(1) Model with Geometric marginals: Application to Intra-Day Stock Transactions in Mauritius
Naushad Mamode Khan, Yuvraj Sunecher, Vandna Jowaheer, Isven Veerasawmy, Muslun Azmi
Paper ID IA-ICEBMISTN-20128-9642 · Pages 23-26
Download PDF: BINAR(1) Model with Geometric marginals: Application to Intra-Day Stock Transactions in MauritiusAbstract
This paper proposes a novel bivariate integer- valued autoregressive process of order 1 (BINAR(1)) where the counting series are Geometric while their corresponding innovations follow a mixed Geometric distribution with non-stationary moments due to the effect of time-dependent covariates. In contrast to the existing stationary BINAR(1) with marginal Geometric model, this paper assumes the cross-correlation between the series is induced by the correlated innovations only. As for the inferential part, the regression parameters are estimated by the generalized quasi-likelihood (GQL) method while the dependence parameters by the method of moments based on a robust autocorrelation specification. A simulation study is designed to assess the estimation procedures. The new model is also applied to analyse the trading intensity or volume of intra-day transactions of the two major banking institutions in Mauritius, namely Mauritius Commercial Bank Group Limited (MCB) and State Bank of Mauritius Holdings Ltd (SBMH), that are listed in the Stock Exchange of Mauritius (SEM). The root mean square errors (RMSEs) are computed and compared with the BINAR(1) with Poisson innovations. Index Terms - BINAR(1), Geometric, GQL, Non-Stationary ,Over- Dispersion
-
Whistle Blowing Intention among Enforcement Officer: Empirical study of Royal Malaysian Police
Soheil Kazimean, Jamaliah Said, Normah Omar, Ruhaya Atan
Paper ID IA-ICEBMISTN-20128-10596 · Pages 27-30
Download PDF: Whistle Blowing Intention among Enforcement Officer: Empirical study of Royal Malaysian PoliceAbstract
Recently, unethical misconduct among enforcement officers have been a major concern both in developed as well as developing countries. Enforcement officer can easily abuse their powers or exploit their position for personal gains which subsequently will tarnish the image of public sector as a whole. Whistleblowing can be seen as a sort of mechanism for controlling and monitoring organization, protecting against misconduct and fraudulent act. This study aims to assess the current level of readiness to blow whistle among RMP officers. Data collected from 101 Royal Malaysian officers revealed that respondents confidence on the whistle blowing policy and protection and ready to blow whistle if the their office provide whistle blowing infrastructure such as hot or help line and confidentiality. However, their willingness to blow whistle depending on the severity and frequency of the unethical behavior. The fact that the enforcement officers are more willing to blow whistle if they believed that their report will be investigated provide indication that based on their experience some of whistle blowing reports were not seriously investigated. Keywords - Whistleblowing, Royal Malaysian Police, Unethical Behaviour
-
Assessing the Implementation of Enterprise Risk Management by Malaysian Firms using ERMDi
Ruhaya Atan, Enny Nurdin Sutan Maruhun, Sharifah Norzehan Syed Yusuf, Jamaliah Said
Paper ID IA-ICEBMISTN-20128-10599 · Pages 31-34
Download PDF: Assessing the Implementation of Enterprise Risk Management by Malaysian Firms using ERMDiAbstract
Enterprise risk management (ERM) was introduced as a response to the global financial crisis. Despite the claim that ERM is the solution for corporate governance deficiency, particularly in risk management practices, the number of empirical research studying this new field is still limited. This study aimed at assessing the extent of ERM practices, among Malaysian public-listed companies, by using a newly developed measurement. Eighty-one usable questionnaires were successfully collected and analysed. Findings from this study provide a different perspective of measuring ERM implementation and a better understanding on ERM implementation practice. Keywords - Enterprise Risk Management, ERM Measurement Index
-
Physico-Chemical Quality of Waste Water and the Risk of Pollution of Bechar River South West of Algeria
Kendouci Mohammed Amin, Mebarki Saliha, Bendida Ali, Kharroubi Benali
Paper ID IA-ICENSISTN-20128-10641 · Pages 35-37
Download PDF: Physico-Chemical Quality of Waste Water and the Risk of Pollution of Bechar River South West of AlgeriaAbstract
In urban environment, the increase in population generates considerable quantities of waste water which is treated in the purification plants to specialize or reject directly without control in the courts of water case of Bechar River. Because of their various origins (domestic rejections), this water is generally charged in organic, mineral elements and in micro-organisms of which some could be harmful with health and strongly takes part in the degradation of the tablecloths which could be irreversible. The town of Bechar (Southern Algerian West) which is in an arid Saharan area knows like all the Algerian cities of the problems of surface and underground pollution the waters, whose main causes are: the discharge of waste water in nature without purification and the absence of the systems of purification and depolution of waste water. The present study is undertaken on the course of Bechar River, carried out in April 2017 revealing a polluting load: (Nitrate 7.94 mg/l, Nitrite 0.6 mg/l, Ammonium 26.60 mg/l, NTK 62.18 mg/l). In April 2014, of samplings of waste water noted Wi were realized according to the recommendations of WHO. The choice of the sites was fixed according to the direction of flow. The results obtained according to the study analyzes physic-chemical samples of the rejections testify in their majority that a contamination of subterranean water of the tablecloths by waste water of the river according to a process of infiltration which depends on several environmental and climatic factors is extremely probable and which an urban treatment of the rejections is paramount to protect the tablecloth and the ecosystem. Keywords - Algeria, Bechar River, Environment, Urban Rejection, Contamination, Parameters Physico-Chemical
-
Use of Plants and Local Materials for Domestic Wastewater Treatment in Arid Zone (South West of Algeria)
Bendida Ali, Kendouci Mohamed Amine, Tidjani Abdellatif El-Bari
Paper ID IA-ICENSISTN-20128-10666 · Pages 38-41
Download PDF: Use of Plants and Local Materials for Domestic Wastewater Treatment in Arid Zone (South West of Algeria)Abstract
In urban areas, population growth generates significant amounts of wastewater that is treated in sewage treatment plants specialize or reject directly controlling interest in the natural environment. Many scientists are looking into the issue to try to find solutions to clean water and make it drinkable. We are interested in the technique of sand filtration (in the region southwest of Algeria), as an essential phase for the treatment of wastewater, such methods are known to be well suited to rural areas, since they have a good quality of treatment, a relatively simple operation and low maintenance. The method is based on the following principle: a slow filtration, water passes under a constant hydraulic load (30 cm water) the filter bed (60 cm of sand), the hydraulic load is kept constant during the experiment. A physicochemical analysis is performed on the water sample before and after filtration, the filter bed to give us a discount of around 50% in the levels of contaminant parameters such as NTK, Ammonium, Nitrate, and Nitrite. The reduction of BOD, COD and suspended solids is about 90%. It was observed a significant increase in the potassium from 33.19 mg / l to 99.89mg / l. Keywords - Sand dune (Western Erg) Algeria, Wastewater, Filter Bed, Permeability, Treatment, Physicochemical Analysis
-
Decontamination of Kherzet Youcef Mine Tailings
Amira Merchichi, Malek Ould Hamou
Paper ID IA-ICENSISTN-20128-10766 · Pages 42-45
Download PDF: Decontamination of Kherzet Youcef Mine TailingsAbstract
Mining industry has been an important economic activity for many decades. Although this industry brings significant socio-economic benefits, many negative impacts on the environment result. In the short term, the destruction of the natural landscape, the fragmentation of ecological environments are major negative impacts while in the long term, it can cause significant damage by acidification of the environment called acid mine drainage (AMD). The objective of this work is to conduct a remediation study of the Kherzet Youcef mine tailings and to remove the maximum of sulphides from these residues so that they are no longer acid generators by applying the non-selective flotation technique. As in any treatment study, physical, chemical and mineralogical characterization tests are carried out, in order to allow the identification of the discharges coming from the Kherzet Youcef mine complex dike. For the desulfurization process, we studied the different parameters affecting the non-selective flotation method. To do this, we varied the concentrations of the chemical reagents used (collector and activator), as well as the pH and the particle size, in order to determine the optimal conditions allowing to obtain the best results, and to elaborate a flow sheet of tailings processing of Kherzet Youcef mine. The case of the Kherzet Youcef mining complex where research conducted by Belkhiri, 2011 and Aitouchak, 2006, on groundwater, soils and sediments of the wadis of the plain of Ain Azel, confirmed the pollution of the region. We therefore proposed to undertake, as part of this project, to carry out a study to decontaminate these residues. Index Terms - Decontamination, Desulfurization process, Kherzet Youcef mine, Mine tailings.
-
Geochemical Study of Waste Dike from Kherzet Youcef and Chaabet el Hamra Mines
Malek Ould Hamou, Amira Merchichi
Paper ID IA-ICENSISTN-20128-10767 · Pages 46-49
Download PDF: Geochemical Study of Waste Dike from Kherzet Youcef and Chaabet el Hamra MinesAbstract
Today, the mining industry raises very acute environmental problems. The major difficulty with the approach of the environmental problems in the mining industry is the extreme diversity of situations, which implies particularly varied solutions. This work contributes on one hand: - A better understanding of the geochemical behavior of mineral processing tailings from Kherzet Youcef and Chaabet El Hamra mines. This requires a granulo-chemical and mineralogical characterization. - In the other hand, to beneficiate these residues by flotation as to a get ride of the heavy metals wich are harmefull to the environment. Index Terms - Environment, Geochemistry, Flotation, Leaching, Mine Tailings.
-
The Effects of Phosphate Crystals and Microstructures in Various Sizes onto the Coating Weight and the Pressing-Mounting Operations
Tayfun Keskin, Emre Yurtemre, Bahadir Gurpinar, Cem Dizdar
Paper ID IA-ICMAEISTN-20128-10708 · Pages 50-53
Download PDF: The Effects of Phosphate Crystals and Microstructures in Various Sizes onto the Coating Weight and the Pressing-Mounting OperationsAbstract
In this study, 4 microstructures in different types are obtained by forming phosphate crystals in different dimensions and microstructures during zinc phosphate coating operation performed onto the semi-finished product of C45Pb made of steel for increasing the corrosion resistance of it. Also, 2 microstructures in different types are obtained by forming phosphate crystals in different dimensions and microstructures on the semi-finished product of 11SMnPb30 made of steel, too. Here, the effects of these phosphate crystals in different dimensions and microstructures onto both the coating weight and the 8 distinct pressing-mounting combinations that will be applied on them are examined. Index Terms - Zinc phosphate coating, phosphate crystals, Coating weight, Microstructure, Pressing, Mounting
-
Antimicrobial Activity of Medicinal Mushroom: Algerian Desert Truffle
Samir Neggaz, Zohra Fortas, Fatima El-Houaria Zitouni
Paper ID IA-ICMBPSISTN-20128-10563 · Pages 54-55
Download PDF: Antimicrobial Activity of Medicinal Mushroom: Algerian Desert TruffleAbstract
Tirmania pinoyi (Maire)Malençon is a famous edible fungus in Algeria, well-known for its pleasant flavor and aroma. It is consumed as food and for medicinal properties. The aim of present study is to investigate the antimicrobial activity of T. pinoyi collected from El Bayed in West of Algeria. Soxhlet apparatus was used for extraction with a series of solvents, dichloromethane, chloroform, ethyl acetate and methanol in sequence of increasing of polarity. The results obtained revealed that the nature of solvents had a significant effect on both the antioxidant and antimicrobial activities. The antimicrobial activity of T. pinoyi was evaluated against two Gram-positive and two Gram negative bacteria using agar well diffusion methods. The results showed that the majority of the extracts investigated showed greater activities against the Gram-positive and negative bacteria. Keywords - Desert truffle, Tirmania pinoyi (Maire), Antioxidant activity, Antibacterial activity, DPPH, well diffusion methods
-
First Principals Calculations For Electronic and Optical Properties of full-Heusler Alloys Cs2CrGe
S.Cherid, S. Bentata, F. Bendahma, A. Zitouni, O. Akel
Paper ID IA-ICRAETISTN-20128-10391 · Pages 56-59
Download PDF: First Principals Calculations For Electronic and Optical Properties of full-Heusler Alloys Cs2CrGeAbstract
The electronic and optical properties of full-Heusler alloys Cs2CrGe are examined in this study using FP-LAPW method based on density functional theory. Results of our calculations predict that the Hg2CuTi-type structure is more stable than the Cu2MnAl-type structure and the ground state of this alloy is ferromagnetic. the Density of state of Cs2CrGe shows half metallic in spin down for the three approaches GGA and mBJ-GGA. Keywords - Full-Heusler, FP-LAPW Method, Half Metallic, Ferromagnetic.
-
Effect of High Styrene Resin on Flow Times Instead of Kaolin used as Additives in Rubber Compound
Uğur Sert, Hacer Kaya, Abdullah Tayyib Akçay
Paper ID IA-ICRAETISTN-20128-10671 · Pages 60-62
Download PDF: Effect of High Styrene Resin on Flow Times Instead of Kaolin used as Additives in Rubber CompoundAbstract
In this study, it is aimed to reduce the injection time of the injection machine by using high styrene resin (HSR) instead of kaolin used in rubber compounds. A reduction of close to 50% was observed in the injection times. Index Terms - HSR, Kaolin, Natural Rubber, Rubber Injection
-
Community Structure Detection in Networks Based on Bee Colony
Bilal Saoud
Paper ID IA-ICRAETISTN-20128-10697 · Pages 63-66
Download PDF: Community Structure Detection in Networks Based on Bee ColonyAbstract
In this paper we propose a new method to find the community structure in networks. Our method is based on bee colony and the maximization of modularity to find the community structure. We use a bee colony algorithm to find the first community structure that has a good value of modularity. To improve the community structure, that was found, we merge communities until we get a community structure that has a high value of modularity. We provide a general framework for implementing our approach. We tested our method on computer-generated and real-world networks with comparison to very known community detection methods. The obtained results show the effectiveness of our proposition. Index Terms - Networks, Bee Colony, Modularity, Normalized mutual information.
-
Legal Protection of Journalists under International Humanitarian Law
Eman Sameer Abed Badawi, Pardis Moslemzadeh Tehrani, Azmi Bin Sharom
Paper ID IA-ICSSHISTN-20128-10444 · Pages 67-71
Download PDF: Legal Protection of Journalists under International Humanitarian LawAbstract
Media professionals are in risk today, especially those in the middle of the war zone. In Palestine for instance, the journalists are targeted even if it says “press†in big blue letter on their back. In order to promote a better protection for journalists, this paper will investigate the provided legal protection in wartimes under international humanitarian law. The paper examines whether the international treaties providing a sufficient legal protection for journalist and the validity of these instruments. The findings of this research are: that there is no sufficient legal protection for journalists in war zones, not all types of journalists are included under the legal protection. The researcher recommends ratify a comprehensive new treaty govern protection over all the journalists’ types and develop the IHL provisions to include the journalists with the protection under the non international armed conflict (NIAC). Keywords - International Humanitarian law, Prisoner of war, War Correspondent.
-
European Union and Gulf Cooperation Council Relations: Arduous Cruise
M. Cuneyt Yenigun
Paper ID IA-ICSSHISTN-20128-10552 · Pages 72-77
Download PDF: European Union and Gulf Cooperation Council Relations: Arduous CruiseAbstract
EU – GCC Relations started thirty years ago, but proceeded very languishingly. After the first agreement between two institutions in 1998, EU transformed, GCC slowly changed, international system dramatically converted and rules between two parties were amended by ENP of the EU. Although both sides need each other, obstinate policies caused cessation several times. According to some scholars, GCC is becoming a periphery region for them, GCC still needs the EU as a first market in total trade. Bilateralism, cultural differences, GCC’s loose integration, lack of EU’s leverage in the Gulf could be lined up as some reasons of the unprogressive relations. Recent developments such as Trump’s election, Brexit, Qatar crisis, 5+1- Iran Nuclear Deal and Russia’s growing interest to the Gulf are effecting EU- GCC relations negatively. In this study, historical, and recent developments and their effects on the EU-GCC relations were examined; and in the end some solution alternatives are discussed. Keywords - European Neighborhood Policy, EU-GCC Relations, GCC, GCC Integration, Gulf and Europe.
-
Assessment of Magnesium Vision 2020
Mustafa Imhmed Elshbo
Paper ID WR-MPE-ISTAN-16128-801 · Pages 78-82
Download PDF: Assessment of Magnesium Vision 2020Abstract
The goal of this study is to review and asses the use of magnesium alloys as successful substitute to the iron and steel in automobile industry to lower the impact of automotive industry on environment and achieve a greater fuel economy. Magnesium vision 2020 estimates that 15% of vehicle weight can be reduced by replacing iron and steel components with magnesium alloys. Advantages, technological barriers, future prospects, and limitations of magnesium alloys in automotive were discussed in this study. The recent development of new magnesium alloys to overcome the limitations of using ain applications at elevated temperatures such as corrosion and creep is also evaluated. The result of this study concludes that the limited magnesium infrastructure makes the replacement of heavy materials components in automobile is highly expensive in near future. More cooperation and collaboration among organisations on global level will lead to overcome the limitations over increasing use of magnesium in automotive industry. The accessibility of existing use of high steel strength infrastructure make high strength steel the main candidate to replace iron and steel component in vehicles. Index terms - Magnesium Alloys, Magnesium Vision 2020, Limitations, Advantages, Competitors.
-
Comparison of Mechanical Properties of UNS C12200Joints Brazed by (Cu &Ag) Based Filler Metals
Ali B. Elhatmi, Mustafa I. Elshbo, Hussin A. Alosta
Paper ID WR-MPE-ISTAN-16128-4470 · Pages 83-86
Download PDF: Comparison of Mechanical Properties of UNS C12200Joints Brazed by (Cu &Ag) Based Filler MetalsAbstract
Seamless Copper Tubes grade UNS C12200 used in medical applications were brazed by Copper and Silver – based filler metals to compare the tensile strength and hardness of the brazed joints and to determine the best filler metal alloy to be used in the medical applications. First, the copper tubes were taken from the Zawia Hospital and chemically analyzed. The results of chemical analysis satisfy the EN BS EN 13348. The copper tubes were cut and brazed using RBCuZnAl, BCuP2 & BAg2 filler metals. The brazed joints were tested using tensile and hardness tests and the results showed that the brazed joint by BCuP2 is the hardest joint which make it prone to stress corrosion cracking. While the joint brazed by the filler metal RBCuZnAl has the highest tensile strength and toughness which make it more desirable in medical applications as it can stand the pressure passing through the copper tubes. Keywords - Welding, Brazing, Copper tubes, Joints.
-
Performance Analysis of Iris Recognition by Using Classical and Trapezoidal Shaped Templates With a State-of-Art Iris Segmentation Technique
Oktay Koc, Albana Roci, Arban Uka
Paper ID WR-RACSIT-ISTAN-16128-4612 · Pages 87-90
Download PDF: Performance Analysis of Iris Recognition by Using Classical and Trapezoidal Shaped Templates With a State-of-Art Iris Segmentation TechniqueAbstract
Iris recognition is an automated process of authentication of individuals based on their unique characteristics of iris patterns. These characteristic features can be extracted and encoded by projecting them onto Gabor wavelets and transforming their phasor information into binary codes. These codes are used to identify or match the individuals by using some decision metrics. Hamming distance is one of the most known and used matching metric for identifying individuals. Iris recognition has four stages; image acquisition, image preprocessing, image feature extraction, and image matching. Proper segmentation of the iris region is an important step where researchers have to solve co-occurring effects such as eyelid occlusion, eyelashes, or reflection of lights. After the segmentation, the second step is creating an iris template. Here we modify the well-known rectangular iris template that is created by binary phasor information of individuals into a different trapezoidal iris template. The tests were conducted employing traditional and recently developed EPK_IRIS segmentation and different encoding schemes by new defined trapezoidal template under the different noise levels of Gaussian noise and Salt-and-pepper noise. We report better accuracy and equal error rate (EER) results at some specific noise levels. In this work, we conclude that the EPK_IRIS segmentation in both template types gives better results. Index terms - Iris Recognition, Segmentation, Accuracy, EER, Hamming Distance, Iris Templates
-
Evaluating The High-Velocity Impact on The Multi-Layered Panelusing The Regression Modelling
N. A. Rahman, S. Abdullah, M. Z. Omar, Z. Sajuri, W. F. H. Zamri
Paper ID IA-ICMAEISTN-20128-7742 · Pages 91
Download PDF: Evaluating The High-Velocity Impact on The Multi-Layered Panelusing The Regression ModellingAbstract
This paper presents the regression-based models for high velocity impact performance of multi-layered steel-aluminium panels under armour piercing projectile impact. Layer thickness and impact velocity are major factors affecting the performance of the multi-layered panels. The regression modelling aims to ease the process in determining the ballistic performances which are affected by these factors. Two types of laminated panels were constructed using finite element modelling for impact simulation at the velocity range of 400 m/s to 900 m/s; double-layered and triple-layered configuration. Ballistic performance of each configuration plate in terms of depth of penetration, end of penetration, energy absorption and stress distribution was quantified. Multiple linear regression approach was conducted to obtain the regression models for each ballistic performance. Linearity, normality and scatter of the residuals were investigated to ensure the goodness of data fitting. As a result, regression models for depth of penetration and energy absorption responses for steel layer gave coefficient of determination values, R20.94. This has indicated that layer thickness and impact velocity have significant effect on these responses. The models were then validated using finite element data. The validation results indicated that the model predictions were acceptable and hence, could be used to enhance multi-layered panel designs. Keywords - Ballistic Impact; Multi-Layered Panel; Multiple-Linear Regression;
-
Oxytetracycline Loaded Chitosan-Carboxymethyl Cellulose Microspheres Crosslinked With Sodium Hexametaphosphatefor Drug Delivery
Omar Larbi-Bouamrane, Youcef Bal, D. Aliouche
Paper ID IA-ICMBPSISTN-20128-10495 · Pages 92
Download PDF: Oxytetracycline Loaded Chitosan-Carboxymethyl Cellulose Microspheres Crosslinked With Sodium Hexametaphosphatefor Drug DeliveryAbstract
In this work, Oxytetracycline,which is a broad-spectrum antibiotic was encapsulated into co-polymerized microspheres made from chitosan (CS), sodiumcarboxymethyl cellulose (CMC) and sodiumhexametaphosphate (SHMP) as crosslinking agent.The obtained microspheresprepared from 1:1 and 3:1 ratios of the two biopolymerswere characterized preliminarily by FTIR and electron microscopy (SEM) and the effect ofglutaraldehyde used as membrane hardening agent was also assessed.The swellingbehavior of the microspheres and the release kinetics of the antibioticin simulated gastric and intestinal mediashowed that microspheres with Cs/CMCratio of 1/1 weremore efficient. Moreover, the use of glutaraldehyde at small extent seemed to give a good resistance of the microspheres in these media. Keywords - Chitosan, Carboxmethylcellulose, sodium hexametaphosphate, Glutaraldéhyde
-
Characterization of Lactic Acid Bacteria Isolated from Traditional Conserved Meat El Guedid Collected in Tebessa Region
Mabrouka Benhadj, Aouachria Nozha, Mammeri Hamida
Paper ID IRES-FMFSANTLY-21128-9461A · Pages 93
Download PDF: Characterization of Lactic Acid Bacteria Isolated from Traditional Conserved Meat El Guedid Collected in Tebessa RegionAbstract
The meat product are considerate as an excellent culture media for different microbe species as pathogen bacteria which are dangerous and spoilage bacteria that can cause economic losses but also they exist naturally lactic acid bacteria most of which are beneficial because they have an inhibitor role against undesirable micro flora. Lactic acid bacteria especially lactobacilli are considered as the major micro flora biota of meat and meat products. Eigh lactic acid bacteria were isolated from 03 samples from traditional conserved meat El-Gue did using two different culture media, MRS and M17. The characterization of lactic acid bacteria strains was effected by phonotypical and biochemical study. The results show that this bacteria present a good adaptation for meat environment and tolerate until 10% of Nacl wich five strains are considered as hetero fermentative bacteria . Key words - Meat, lactic acid bacteria, Guedid, characerizaion
-
Dynamic Analysis of Infilled R.C. Plane Frames with Openings in the in Fills
Jamal Ahmad Alomari
Paper ID IRES-ICENSRIYAD-13128-9317 · Pages 94-102
Download PDF: Dynamic Analysis of Infilled R.C. Plane Frames with Openings in the in FillsAbstract
Dynamic analysis of an 8-story reinforced concrete building frame including raft foundation and infill panels is carried out. The wall panels are composed of building stones backed by plain concrete . Door and window openings are included within the wall panels. The dynamic loading used is the well-known El Centro N-S earthquake excitation of 1949 . The raft foundation is divided into a number of finite elements and the soil below is assumed homogeneous and extending below the raft foundation. Its stiffness matrix is obtained by inverting its flexibility matrix. Wall panels with openings are represented by plane stress plate finite elements. An opening in the panel is realized as an element of very small modulus of elasticity for its material or a very small thickness or both of them. Different opening configurations and sizes were utilized. The stiffness matrix of the structure components are assembled into the overall structure stiffness matrix. A computer program in FORTRAN was written to handle the described calculations. The structure dynamic equation is written as: M d2y / dt2 + C dy / dt + K y = Feff(t) and Feff(t) = -M d2yg / dt2 Where : M is the mass matrix of the structure, C is the damping matrix of the structure K is the stiffness matrix of the structure y is displacement of the structure joints, and its derivatives re[present velocity and acceleration of the structure joints. F(t) represent the vector of forces applied to the structure. d2yg / dt2 is the ground acceleration The described frame is analyzed under gravity loads and El-Centro excitation. The first 10 periods of vibration are obtained for different configurations of wall panels with different sizes of openings. The first five modal shapes of the building frames are obtained. The horizontal displacements at the story levels were recorded. The effects of wall panels and openings on the structure behavior under the described loading is presented. Keywords - Dynamic; infill; opening; mode shape; period; seismic
-
First Principals Calculations for Electronic Magnetic and Elastic Properties of full-Heusler Alloys Cs2CrGe
S.Cherid, S. Bentata, F. Bendahma, R. Bentata, A. Zitouni, O. Akel
Paper ID AC-ASTE-ISTNBL-19128-2360 · Pages 103-105
Download PDF: First Principals Calculations for Electronic Magnetic and Elastic Properties of full-Heusler Alloys Cs2CrGeAbstract
In this study The electronic and elastic properties of full-Heusler alloys Cs2CrGe are examined using FP-LAPW method based on density functional theory. Results of our calculations predict that the Hg2CuTi-type structure is more stable than the Cu2MnAl-type structure and the ground state of these alloys is ferromagnetic. The total magnetic moment calculated, is an important in conformity with the Slater-Pauling curve for full-heusler alloys. Band structure of Cs2CrGe shows half metallic in spin-dn for GGA and mBJ-GGA with an important magnetic moment which equal 4µB which is in good agreement with the Slater-Pauling rule. Keywords - Full-Heusler, FP-LAPW method, half metallic, ferromagnetic.
-
Design, Techno Economic and Environmental Evaluation of a Small Scale Brackish Water Desalination Systems Powered by Solar Energy in the Arid Regions of Algeria.
Mohamed Abbas, Asma Adda, Salah Hanini, Djilali Tassalit, Hanane Aburdeh, Zahia Tgrine
Paper ID IA-ICRAETISTN-20128-10504 · Pages 106-109
Download PDF: Design, Techno Economic and Environmental Evaluation of a Small Scale Brackish Water Desalination Systems Powered by Solar Energy in the Arid Regions of Algeria.Abstract
The southern regions in Algeria are suffering from fresh water shortage due to their climate severity and the geographic situation. These areas have access to brackish groundwater and significant potential of solar energy. The combination of solar energy with desalination processes, such as reverse osmosis systems, presents possible solution to satisfy the fresh water needs for the population living in these remote areas. This paper presents a technical and economic evaluation of a small-scale brackish water reverse osmosis desalination unit powered by solar photovoltaic systems for fresh water production under Algerian arid climate conditions. In the first part of this paper, a mathematic model has been developed for design and sizing the photovoltaic field, taking into account two configuration; power system with batteries and without batteries. The photovoltaic system model is coupled to reverse osmosis model to determine the overall system performance (water production, Specific Energy Consumption…) and an optimization is performed in order to determine the suitable configuration. In the second part, the economic feasibility study of use solar energy has been done using some economic parameters such as, Levelized Water Costs (LCOW) Net Present Value (NPV) and Internal Rate of Return ( IRR). The investigation also includes a discussion on the sensitivity of cost of unit of produced fresh water to some parameters such as the useful life of reverse osmosis system, cost of solar photovoltaic pannels and other associated parameters. The results of this investigation can be used also as indicators to identify the best locations for solar powered desalination plant implementation for fresh water production in Algeria. Keywords - Desalination, Brackish water, Solar Energy, Photovoltaic.