Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

172ND IASTEM INTERNATIONAL CONFERENCE, Bangkok, Thailand 05-03-2019

← All proceedings

Proceedings cover: 172ND IASTEM INTERNATIONAL CONFERENCE, Bangkok, Thailand 05-03-2019

172ND IASTEM INTERNATIONAL CONFERENCE

Bangkok, Thailand 05-03-2019

7 papers

  1. Object Tracking And Control Of A Model Train Using Machine Vision Techniques

    Pirunrat Kaewphanoaw, Withit Chatlatanagulchai

    Paper ID IA-ICCARVEBNGK-05039-11319 · Pages 1-5

    Abstract

    Studying a railway signaling system from the actual location may consist of many equipment and enormous costs due to many complexities in the system which require the expert to proceed them. Therefore, the control robotics and vibration (CRV) research group has developed a model train system to benefit the study of the train system. The details of this research began with the study of image processing for detecting and tracking the model train. For machine vision system, there are three main steps of operation which are Real-time image acquisition, Image background subtraction and object tracking. In parts of control system, Fuzzy logic control is used as a method of controlling the model train to stop automatically since the fuzzy logic control is uncomplicated and provides the reasonable logic to make the model train stop at the target accurately. Index Terms - Machine vision system, Object tracking, Model train, Fuzzy logic control system, Image processing

    Download PDF: Object Tracking And Control Of A Model Train Using Machine Vision Techniques
  2. Consideration Of Retail Company From The Service Point Of View "Retail As A Service / Raas"

    Tetsuo Takizawa, Akira Kamoshida

    Paper ID IA-ICEBMBNGK-05039-11351 · Pages 6-10

    Abstract

    Many retailers suffering from deteriorating business performance considers the rapid growth of Internet companies such as Amazon as its main cause. However, it is an old type of retailing that secure inventory and distribute products as its main function, which is losing its value and losing its position in the market. If they continue to do business as it is, they will not be able to survive the market. Only companies that can create additional value at the retail stage can survive. The retail industry must reconsider its value from the service industry perspective. Index Terms - Direct to Consumer, Retail innovation, Service Innovation, Wheel of Retailing

    Download PDF: Consideration Of Retail Company From The Service Point Of View "Retail As A Service / Raas"
  3. The Impact Of Knowledge Management On Organisational Performance

    Seung Hwan Kang, Jira Yammeesri

    Paper ID IA-ICEBMBNGK-05039-11514 · Pages 11-15

    Abstract

    Knowledge management focuses on making available corporate knowledge wherever and whenever it is needed. Due to the important of challenging work environment, the organization often faces on more needs for knowledge to be shared among people throughvarious channels.This research investigates the impact ofknowledge management on organizational performance in a local international college of one university. For analysis, data are collected from the international college in the past three years. This study analyses the data by using knowledge management solutions which included knowledge discovery, knowledge capture, knowledge sharing and knowledge application.The studyfound that concluded the impact of knowledge management is positively related to organisational performance in several ways by effectively integrating and sharing knowledge from a variety of diverse perspectives people. Index Terms - Knowledge Management, Organizational Performance.

    Download PDF: The Impact Of Knowledge Management On Organisational Performance
  4. Investigation On Laterally Perforated Plate-Fin Heat Sink

    Sakkarin Chingulpitak, Somchai Wongwises

    Paper ID IA-ICMAEBNGK-05039-11509 · Pages 16-19

    Abstract

    Over the past several decades, the development of electronic devices has led to higher performance. Therefore, an electronic cooling system is important for the electronic device. A heat sink which is a part of the electronic cooling system, is continuously studied in research field to enhance the heat transfer. Many researchers have studied heat transfer enhancement of plate-fin heat sink by modification on fin geometry. However, there have been only a few articles which reported the thermal performance of plate-fin heat sink with perforation. This research aims to study on the flow and heat transfer characteristics of solid-fin heat sink (SFHS) and laterally perforated plate-fin heat sink (LAP-PFHS). The SFHS and LAP-PFHSs are investigated on the same fin dimensions. The LAP-PFHSs are performed with a 27 perforation number and two different diameters of circular perforation (3 mm and 5 mm). The experimental study is conducted under various Reynolds numbers from 900 to 2,700 and the heat input of 50W. The experimental results show that the LAP-PFHS with perforation diameter of 5 mm gives the minimum thermal resistance about 25% lower than SFHS. The thermal performance factor which take into account of the ratio of the Nusselt number and ratio of friction factor is used to find the suitable design parameters. The experimental results show that the LAP-PFHS with the perforation diameter of 3 mm provides the thermal performance of 15% greater than SFHS. In addition, the simulation study is presented to investigate the effect of the air flow behavior inside the perforation on the thermal performance of LAP-PFHS. Keywords - Heat sink, Parallel flow, Circular perforation, Non-bypass flow.

    Download PDF: Investigation On Laterally Perforated Plate-Fin Heat Sink
  5. Investigation On Heat Transfer And Pressure Drop Of R-134a During Condensation In A Dimpled Tube

    Kanit Aroonrat, Somchai Wongwises

    Paper ID IA-ICMAEBNGK-05039-11517 · Pages 20-23

    Abstract

    The experimental study was conducted to investigate the condensation heat transfer and pressure drop of R-134a flowing inside a dimpled tube. The test section is a counter-flow double-tube heat exchanger, which the refrigerant flows in the inner tube and water flows in the annulus. The inner tubes are one smooth tube and one dimpled tube. The experiments are performed over a mass flux of 400 kg/m2s, heat flux of 10 kW/m2, and condensing temperature of 50 ËšC. The results show that the dimpled tube provides maximum heat transfer enhancement and pressure drop augmentation up to around 90% and 607% over the smooth tube, respectively. Index Terms - Condensation, dimpled tube, heat transfer, pressure drop.

    Download PDF: Investigation On Heat Transfer And Pressure Drop Of R-134a During Condensation In A Dimpled Tube
  6. Designing A Sustainable Commercial Kitchen

    Kurniadi Setiono, Pornthep Anussornnitisarn

    Paper ID IA-ICSTMBNGK-05039-11321 · Pages 24-29

    Abstract

    Designing a sustainable commercial kitchen has been an interesting topic in food service industry, especially in safety, productivity, efficiency, and financial viability. This research is to introduce the space planning, energy efficiency, and investment aspects and process that are necessary to be configured in designing a sustainable commercial kitchen as well as an interactive tool to communicate these elements and process to owner, operator, consultants, and kitchen planner who involve during a commercial kitchen design process.

    Download PDF: Designing A Sustainable Commercial Kitchen
  7. Toward Model Of Social Media Adoption: A Meta-Analysis Approach

    Ying-Kai Liao, Or Nita

    Paper ID ISD-EMSSPHON-04039-9896 · Pages 48-54

    Abstract

    As the adoption of social media become more and more prevalent, social media has become one of the most critically competitive weapons for B2B and B2C marketing. Previous studies have used different factors to explain consumers’ attitude and intention toward using social media. However, very rare studies have tried to integrate them from a holistic view and identified possible interactions between relevant variables. To fill this research gap, this study aims to develop a comprehensive framework to explain the effects of antecedents, mediators and moderators on consumers’ intention toward using social media. Specifically, this study integrates some sets of variable from the perspective of technology acceptance, knowledge sharing, motivation, opportunity and ability, as the antecedents to promote consumers’ social media adoption. Meta-analysis was used to synthesis the results of 201 previous qualitative studies related to social media from 2007-2018, to see the magnitude and significance of each hypothesis testing. The results of this study suggested that technology acceptance factors, knowledge sharing factors, and MOA (motivation, opportunity, and ability) factors all served as the antecedents of attitude toward social media usage, which further facilitate behavior intention toward using social media. In addition, both social influence and customer values have served as the moderators that can enhance the influence of attitude on behavior intention toward social media. Since previous studies never integrated the influential factors into a more comprehensive framework with empirical validations, the results of this study can be provided as important references for professionals to develop social media strategies. The research framework can also be used as a base model for academicians to conduct further validation. Keywords- social media, knowledge sharing, technology acceptance, social networking, MOA theory.

    Download PDF: Toward Model Of Social Media Adoption: A Meta-Analysis Approach