Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

180TH IASTEM INTERNATIONAL CONFERENCE, Munich, Germany 03-05-2019

← All proceedings

Proceedings cover: 180TH IASTEM INTERNATIONAL CONFERENCE, Munich, Germany 03-05-2019

180TH IASTEM INTERNATIONAL CONFERENCE

Munich, Germany 03-05-2019

4 papers

  1. Studying Rural Road Characteristics using The Developed Simulation Model and S-Paramics

    Ali Jihad Kadhim, Hamid Athab Edan Al-Jameel

    Paper ID IA-ICCAEMUNI-03059-9762 · Pages 1-7

    Abstract

    This study has mainly focused on studying the characteristics of selected rural roads in Iraq using the developed simulation model and S-Paramics in order to enrich the area of developing such traffic simulation model calibrated with field data. Thus, several sites, such as Baghdad-Hilla, Baghdad-Mahmudiyah, Baghdad-Kut, Baghdad-Diyala and Najaf-Kerbala, have been investigated such as two and three-lane sections. This paper has three objectives; first, to investigate driver behavior mostly according to collected data of lane changing, lane utilization, flow and time headway. The second objective is to develop simulation model starting from car-flowing and ending with the process of calibrating it graphically and statistically with field data. The third objective is to calibrate the well-known S-Paramics model with field data and comparing it with the developed model. More than 80hrs have been collected using video cameras placed on footbridges as vantage points. The graphical and statistical analyses demonstrate more accurate for the developed model with field data than S-Paramics model. This model may be considered as the first step towards modeling driver behavior in Iraqi rural roads and enhance this model to represent different behaviors according to the collected data. Index Terms - Simulation model, rural roads, S-Paramics, lane changing, lane utilization.

    Download PDF: Studying Rural Road Characteristics using The Developed Simulation Model and S-Paramics
  2. Development of Genetic Programming Model for Prediction of Cutting Forces in Rotary Milling

    Gopala Rao Thellaputta, P. S.C. Bose, C.S.P. Rao

    Paper ID IA-ICMAEMUNI-03059-12040 · Pages 8-11

    Abstract

    There has been huge requirement and immense interest to develop the novel technologies in the metal machining and defence industry because of the improvement of tool substances reached optimalstage. The cutting tool life was drastically reduced while machining ofdifficult to cut materials such as titanium based super alloys; Nickel based super alloys and structural composite materials. Here the novel technology to increase tool life is self propelled rotary machining. The manufacturers were developing such tools to increase the productivity. In this work face milling operation was carried out on Inconel 625 a Nickel based super alloy which is widely consumed in industries like aerospace and defence. After conducting experiments predictive models were developed using multi gene genetic programming (MGGP) to predict the cutting force. The cutting force which is predicted using MGGP had the better correlation with the experimental values. Keyword - Rotary machining, MGGP, Inconel 625, Nickel based super alloys.

    Download PDF: Development of Genetic Programming Model for Prediction of Cutting Forces in Rotary Milling
  3. Mechanical and Microstructure Studies of Two Step Stir Casted Aa7150-Tic Nanocomposite

    Pagidi Madhukar, C.S.P. Rao

    Paper ID IA-ICMAEMUNI-03059-12129 · Pages 12-15

    Abstract

    This research deals with AA7150-TiC nanocomposite and its mechanical properties for fracture surface studies under tensile testing conditions. Two step stir casting and vortex methods were employed to fabricate AA7150-TiC nanocomposites. Titanium carbide was selected as reinforcement and added into a molten liquid with various weight percentages such as 0.5, 1.0, 1.5, and 2.0 wt% to find the effect of reinforcement and optimal percentage for enhancing certain characteristics such as hardness and strength of nanocomposites. Addition of 1.0 wt% of reinforcement showed better mechanical properties. At optimal percentage, an Optical Microscope was used to analyze the grain boundaries, average grain size, as well as compare these with monolithic and 2 wt%TiC. Scanning Electron Microscope for fracture surfaces was used to find the nature of failure and EDS for the chemical composition of nanocomposites. Keywords - Stir Casting, AA7150, Microstructure, Mechanical Properties, Nonocomposites, TiC.

    Download PDF: Mechanical and Microstructure Studies of Two Step Stir Casted Aa7150-Tic Nanocomposite
  4. Incorporating The Humanities and Arts into Stemm Education: Challenges and Opportunities

    Krystyna U. Golkowska

    Paper ID IA-ICSSHMUNI-03059-12113 · Pages 16-18

    Abstract

    Although the value of incorporating the arts and humanities into STEMM (Science, Technology, Engineering, Mathematics. and Medicine) education has recently been gaining recognition, more research is needed to establish a conceptual framework for such disciplinary integration and to identify appropriate pedagogical practices to achieve its goals. To give an example of challenges and opportunities of this approach, the present article focuses on medical education, where the need for values traditionally associated with liberal arts education such as critical thinking, empathy or civic engagement is most evident. Keywords - Medical Education, Integration, Humanities, Skills

    Download PDF: Incorporating The Humanities and Arts into Stemm Education: Challenges and Opportunities