Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

191ST IASTEM INTERNATIONAL CONFERENCE, Los Angeles, USA 18-07-2019

← All proceedings

Proceedings cover: 191ST IASTEM INTERNATIONAL CONFERENCE, Los Angeles, USA 18-07-2019

191ST IASTEM INTERNATIONAL CONFERENCE

Los Angeles, USA 18-07-2019

6 papers

  1. Structural Response Of Hillside Four Storey Reinforced Concrete Existing Building Under Seismic Exitation

    Bambang Suhendro

    Paper ID IA-ICCAELOS-18079-11922 · Pages 1

    Abstract

    Most of Indonesia's territory is located in the tectonic earthquake zone which is very active with relatively high peak ground acceleration. Based on the records of the USGS, Indonesia has had more than 150 earthquakes with magnitude more than 7 during the last decade. Earthquake zoning maps and Earthquake Resistant Building Codes have been in effect since 1982, and are renewed every 5 years, which tend to be more stringent requirements. The problem that always arises is to carry out structural assessments of existing buildings that are very large in number and have been built at that time based on the old design code. The problem becomes more complicated when the existing structures assessed are in a critical category, because they are located on the hillside with steep slopes. This paper discusses the assessment of the existing structure of a four-story building made of reinforced concrete, which is located on a slope of around 300. So many similar structures are found in various hills and mountain slopes in the country. Assessment is carried out by first conducting sample tests and non-distructive tests to assess the quality of existing concrete (after more than 8 years of service) in various structural elements, reconstructing steel reinforcement data, and re-measuring the dimensions of structural elements, along with the foundation system. Structural analysis is carried out based on assessed material properties data. Most of the building's base is beared on the excavated ground and the rest is on the fill. The foundation system is in the form of bored piles which are not uniform in length (because they have to adjust to the existing steep slope). The further downhill the longer the foundation, so that the elevation of the virtual fixing point of the pile foundation will also be deeper. The structural analysis carried out in this assessment used Finite Element Method, and includes: (a) eigenvalue analysis to obtain natural frequencies and modes of the 1st, 2nd, and 3rd; (b) time history analysis to obtain structural responses due to earthquakes; (c) checking the capacity of structural elements (beams, columns, floor slabs, structural walls and pile foundations), and (d) retrofitting designs on structural elements that do not meet the strength and ductility requirements. However, due to the limited space, only the results of dynamic properties analysis and time history analysis are discussed in this paper. The analysis results indicate that: (a) the 1st, 2nd and 3rd natural frequencies of the structure, respectively, are 0.885 Hz, 0.918 Hz, and 1.021 Hz; (b) the 1st mode shape is torsional, the 2nd is translation, and the 3rd is torsional; (c) because the fundamental shape mode is torsional, the distribution of shear forces on the bored piles foundation is uneven, and the short piles receive shear forces that are relatively much larger than the longer piles; (d) with existing reinforcement, the short piles are unable to withstand shear forces (in combination with axial force and bending moment), due to the earthquake such that the building is declared unsafe and in needs of retrofitting on the pile foundation system. Keywords: Seismic Response, Hillside Building, Structural Assessment, Steep Slope

    Download PDF: Structural Response Of Hillside Four Storey Reinforced Concrete Existing Building Under Seismic Exitation
  2. Design And Analysis Of A Positive-Drive Double-Piston Synchronous Gentle Pump

    M. Kilani, A. Al Sharif, M. Rawadiah, J. Fayyad, A. Khan

    Paper ID IA-ICMAELOS-18079-12554 · Pages 2-6

    Abstract

    The paper presents the design and analysis of a novel positive-drive double-piston synchronousgentle pump whichtargetsstress-sensitive fluids. The pump consists of two pistons, which rotate in a synchronized manner inside a circularchannel with rectangular cross section. Each piston is positively driven by an external servomotor, and the motion of the two servomotors is synchronized by a microcontroller. Analytical modeling of the flow field in the suction and in the compression channels of the pump result in a set of analytical expressions, which allows estimating the torque, power and hydraulic efficiency of the pump. Computational fluid dynamics (CFD) software was used to verify the analytical results. Keywords - Double-Piston Synchronous Pump, Stress-Sensitive Fluids, Positive-Drive, Gentle Pumping

    Download PDF: Design And Analysis Of A Positive-Drive Double-Piston Synchronous Gentle Pump
  3. Customizable Automated Snack Vending Machine

    E. Dcruz, A. Alzarouni, H. Aljasmi, A. Aljasmi, A. Hani, M. Kilani

    Paper ID IA-ICMAELOS-18079-12721 · Pages 7-9

    Abstract

    The paper presentsthe design and fabrication of acustomizable automated snack vending,whichdispenses consumer products, based on the currency inserted. The dimensions of the machine are customizable so it can fit on any available space at the customer’s premise. A simple and low cost Arduino controllercontrols the currency acceptance andsnack dispensing of wafer packets, chocolates and juice tetra packs placed on the acrylic spiral coil. The methodology implemented in the conceptualization of the project was customer survey, concept selection and test, system level design, detail design, testing & analysis. The final design could successfully vend four different type of materials staked on the acrylic spiral coil in 5 seconds. Keywords - Arduino Mega, DC Stepper Motor, Dimensions Customizable Vending Machine, Abudhabi Dhiram

    Download PDF: Customizable Automated Snack Vending Machine
  4. Disparities In Stroke Mortalities: Longitudinal Study Of Underserved Populations In US

    Praphul Joshi

    Paper ID IA-ICMBPSLOS-18079-12783 · Pages 10-13

    Abstract

    This study analyzed the mortality rates of cerebrovascular diseases across the United States from 1999 – 2017. Study variables included geographic location (rural / urban), gender and race. Disparities in the mortality rates due to stroke were analyzed using t-tests. Regression models were also utilized to assess the trends in disparities over the study time frame. Results indicated that African American males and those living in non-urban areas were at the highest risk for death due to acute cardiovascular events. Study findings reinforce the need to implement innovative approaches in treating acute cardiovascular events to reduce the mortality rates. Keywords - Cardiovascular Diseases, Health Disparities, Minority Health, Stroke.

    Download PDF: Disparities In Stroke Mortalities: Longitudinal Study Of Underserved Populations In US
  5. Sensor-Based Soil Tester For Crop Rotation Evaluation

    Nestle R. Juco, Arjay D. Ayson, Nheryl John K. Canlapan, Rodel D. Reynante

    Paper ID IA-ICRAETLOS-18079-12148 · Pages 14-17

    Abstract

    This research project aimed to develop a portable device that will aid convenience and cheaper cost for the common farmers as an alternative way to test field soil in order for them to evaluate the nutrients present in the soil, identify and select which crop best fits the soil condition for maximized productivity and profitability. The prototype also aimed to be compact, portable, easy-to-use and automatically assess and generates results in minutes bringing the soil testing stations to the farmers. It also utilizes cheap, common and readily available technology and materials such as Arduino Microcontroller, Raspberry Pi, DC Motors, Peristaltic Liquid Pump, LCD Touch Screen, pH Sensor Spear Kit and Color Sensor for colorimetric reading. The research project is based on Soil Tester Kit (STK) process commonly used in the Philippines wherein the STK is integrated into a device to provide quicker and more convenient way of assessing soil condition by displaying the nitrogen, phosphorus, potassium qualitative value and pH quantitative value. It also evaluates which crops best fits the current soil condition depending on other known variables such as crop season, land or farm area, farmer’s budget for growing crops and assessed soil nutrients. The prototype would also be able to generate how much fertilizer to be applied and forecast how much will be the estimated possible profit given that the crops are grown in normal environment conditions. Keywords - Colorimetry, Crop Rotation, Color Sensor, Soil Tester

    Download PDF: Sensor-Based Soil Tester For Crop Rotation Evaluation
  6. Exploring Mediators Of Mindful Learning Experienceand Mastery Experience During Creativity Game-Based Learning

    Yu-Chu Yeh, Szu-Yu Chen, Elisa Rega, Chin-Shan Lin, Yu-Jung Lin, Nichun Hsieh

    Paper ID IA-ICSTMLOS-18079-11523 · Pages 18

    Abstract

    This study aimed to examine the learning effects of the Digital Game-based Learning System for Creativity and, further, to investigate the relationship between mindful learning experience, flow experience, self-efficacy, and mastery experience among pupils.Eighty-three 5th and 6th graders undertook a six-week creativity game-based learning through the DGLSC. Path model analysis revealed that mindful learning experience was a powerful predictor of both mastery experience and flow experience; it also influenced mastery experience through flow experience and self-efficacy during game-based creativity learning. The findings demonstrate how mindful learning can be incorporated to enhance mastery experience of creativity through game-based learning. Index Terms- Creativity, Flow Experience, Mastery Experience, Mindful Learning, Self-Efficacy, Game-Based Learning

    Download PDF: Exploring Mediators Of Mindful Learning Experienceand Mastery Experience During Creativity Game-Based Learning