Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

195TH IASTEM INTERNATIONAL CONFERENCE, London, UK 07.08.2019

← All proceedings

Proceedings cover: 195TH IASTEM INTERNATIONAL CONFERENCE, London, UK 07.08.2019

195TH IASTEM INTERNATIONAL CONFERENCE

London, UK 07.08.2019

12 papers

  1. Evolutionary Feature and Instance Selection for Visual Recognition

    Chih-Fong Tsai

    Paper ID IA-ICCARVELOND-07089-12759 · Pages 1-6

    Abstract

    The aim of image mining is to automatically extract semantically meaningful information (or knowledge) from image data or to identify other patterns that are not explicitly stored in the images. In particular, image mining must be approached by image preprocessing. The preprocessing step in image mining deals with some conventional image processing tasks, such as segmentation and low-level feature extraction, where the mining result is heavily dependent on the preprocessing result, e.g. the identification of spatial objects and their relationships. From the KDD point of view, the processed image data that are represented by some feature vectors are used for the data analysis or mining stage. However, data preprocessing of KDD is usually based on feature selection and/or instance selection, in which the former focuses on dimensionality reduction and the later for data sample reduction. In this paper, we examine the effects of performing feature and instance selection by the genetic algorithm (GA) on image classification as a very important problem of image mining. The results based on two image datasets show that image mining can take advantage of feature and instance selection. Specifically, GA largely reduces the training dataset size by over 50% dimensionality reduction and near 50% training data sample reduction. In addition, the classifier trained by the reduced dataset can provide comparable accuracy with the baseline classifier without data preprocessing. Keywords - Feature Selection, Genetic Algorithms, Image Mining, Instance Selection, Visual Recognition.

    Download PDF: Evolutionary Feature and Instance Selection for Visual Recognition
  2. Why Job-Involved Employees do Bad Things? Negative Perception and Psychological Entitlement

    Yu-Chen Wei

    Paper ID IA-ICEBMLOND-07089-11964 · Pages 7-10

    Abstract

    This paper integrated moral licensing theory and identity theory to investigate whether negative perceptions produce psychological entitlement among job-involved employees and leads to undesirable behaviors. Using data collected from 216 Taiwanese tutoring school supervisor–subordinate dyads, it was found that the relationship between job involvement and psychological entitlement is positive when injustice is high, but will not exist when injustice is low. Moreover, psychological entitlement mediates the interaction of injustice and job involvement and unethical behavior. Keywords - Injustice, Job involvement, Psychological entitlement, Unethical behavior.

    Download PDF: Why Job-Involved Employees do Bad Things? Negative Perception and Psychological Entitlement
  3. The Role of Competitive Strategy and Market Orientation: The Effect of Innovation and Sustainability

    Zahra Ahmadi

    Paper ID IA-ICEBMLOND-07089-12622 · Pages 11-13

    Abstract

    Purpose -The purpose of this study is to examine how innovation and CSR can influence public housing companies’competitive strategies and strategic performance relationship. Design/methodology/approach – The quantitative method is applied to data from a survey sent to 289 public housing companies in Sweden. Findings – The results show that innovation and CSR affect competitive strategies in public housing market orientation and strategic performance relationship. The companies have taken several initiatives to improve their knowledge of customer's needs and spread it within the company, but companies neglected to be used competitive advantages in the municipalities, which impact on the market orientation and strategic performance relationship. Research limitations/implications – The limitation of this study is paying attention to the public housing companies, a sector that differs radically from open market sector situations. The studyintends only to highlight the effects innovation and CSR dimensions that are important for companies’strategic performance and long-term construction strategies. However, the study could also allow researchers to use the results to compare both similar and different market situations. Practical implications – The study aims to increase the understanding of innovation and CSR effects on the market orientation and strategic performance relationship in public housing companies. This information could be useful for companies facing a similar market situation. The result might be used in future research related to the focused area. Originality – This paper describes the impact of the different CSR dimension and innovation on the market orientation and strategic performance relationship in public housing companies which adds knowledge by including the impact ofCSR dimension, whichprovides insight into how to develop and use market knowledge in the markets. Keywords - Market Orientation, Competitive Strategy, Strategic Performance, Public Housing, Construction Strategies, CSR.

    Download PDF: The Role of Competitive Strategy and Market Orientation: The Effect of Innovation and Sustainability
  4. Market Overview of Healthy Fast Food Restaurants Chain Establishing: International Dimension

    Domashchuk Yaryna Volodymyrivna, Kharchuk Viktoriya Yurijivna

    Paper ID IA-ICEBMLOND-07089-12763 · Pages 14-18

    Abstract

    The main purpose of a paper given is to represent a market overview of a healthy fast food restaurants chain (HFF) and to elaborate recommendations on how to implement this business idea on practice. The idea consists in the creation of a solution to the urgent problem of the restaurant industry, which cannot provide some alternatives to fast food restaurants and classical restaurants regarding requirements of healthy eating combined with fast service. Methods used include data collection from prospective customers, analysis of all information gathered and development together with customers an overall image of HFF chain based on their wishes, worldwide trends and our vision of this project. Another part of the paper consists of all other steps which are needed to be achieved before the HFF chain opening. Keywords - Chain of Restaurants, Customers, Healthy Fast Food, Worldwide.

    Download PDF: Market Overview of Healthy Fast Food Restaurants Chain Establishing: International Dimension
  5. Analytical Hierarchy Process (AHP): An Approach for Selecting The Best-Suited Trade Border Checkpoint Along Mae Hong Son (Thailand) – Myanmar Border

    Teevara Waidee

    Paper ID IA-ICEBMLOND-07089-12785 · Pages 19-22

    Abstract

    Currently there exists five entry points on the Mae Hong Son (Thailand) – Myanmar border, all of which are being employed as temporary trade checkpoints. This paper examines a process and criteria for selecting the one and only point of entry for future trades. Preliminary investigation involved exploring theoretical frameworks, researching various academic papers, and consulting with relevant authorities. Thereafter, a consultation process was conducted on industry experts and relevant stakeholders. The process adopted an Analytic Hierarchy Process (AHP) approach for Multiple Criteria Decision Making (MCDM). Main criteria emerged from the process were: transport infrastructures, volume of trade activities, bordering communities’infrastructures, support of local authorities and border securities. The evaluation process gave “Huay Ton Nun” point of entry as the best option. Keywords - MCDM, AHP, Border Checkpoint

    Download PDF: Analytical Hierarchy Process (AHP): An Approach for Selecting The Best-Suited Trade Border Checkpoint Along Mae Hong Son (Thailand) – Myanmar Border
  6. Chemical Composition, Antimicrobial and Antioxidant Activities of Volatile Oil of Euphorbia Graminea Jacq from Nigeria

    Ejike O. Okpala, Ganiyat K. Oloyede, Patricia A. Onocha

    Paper ID IA-ICMBPSLOND-07089-12740 · Pages 23-27

    Abstract

    Hydro-distillation of the air dried and pulverized whole plant of Euphorbia graminea yielded colourless volatile oil which was analysed by gas chromatography-mass spectrometry. Isopropyl palmitate (45.81%), Oleic acid (14.09%), Palmitic acid (6.65%) and Trans-2-Pentenal (5.68%) were the major constituents in the oil. The volatile oil revealed good antimicrobial activity against ten tested strains of clinical isolates of bacteria and fungi. It was observed that the potency of the volatile oil increased with increase in concentration. High zones of inhibition were observed across all the micro-organisms tested at 100µg/ml. Antioxidant activity of the volatile oil tested using 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical assay revealed a moderate activity (40%) at concentration of 1000 µg/ml. The present study confirms the traditional use of E. graminea in folk medicine for dermatological diseases and microbial infections. Keywords - Euphorbia Graminea, Volatile Oil, Gas Chromatography-Mass Spectrometry, Antioxidant Activities

    Download PDF: Chemical Composition, Antimicrobial and Antioxidant Activities of Volatile Oil of Euphorbia Graminea Jacq from Nigeria
  7. Performance of MOSFET Rectifier for Ultra-Low Power RF Energy Harvesting System

    Noor Hidayah Mohd Yunus, Jahariah Sampe, Jumril Yunas, Alipah Pawi

    Paper ID IA-ICRAETLOND-07089-11869 · Pages 28-32

    Abstract

    This paper presents an analysis simulation of the performance on the MOSFET rectifier circuit designed to operate at ultra-low power levels by utilizing of RF energy harvesting source for a wireless microsensor network applications. Research on energy harvesting proposes that microsensors could utilize the harvested energy from the surroundings. This research aims to propose an architecture of ultra-low power operation and energy efficiency enhancement in RF energy harvester from RF energy sources captured by surface-micromachined patch antenna. The MOSFET rectifying circuit is simulated and analyzed using PSPICE software. Three different transistors are studied for rectifying an AC signal at 5 GHz operating frequency. A comparison between CMOS technology and normal transistor conditions in which identifying one transistor in 0.13-µm CMOS technology implementation and two different commercial Philips transistors, respectively, has been investigated. The input power levels of focus are ranging from -30 to 10 dBm. The simulated results indicate the maximum DC output voltage of 2.15 V from low input power source of -20 dBm at high resistance load of 1 MΩ on the transistor-based implementation. Characterization of efficiency plots reveals approximately 99.47% improvement compared to other commercial transistor-based with commercial capacitance-based system. Thus, it is demonstrated that the proposed architectural design deals a promising solution for an efficient functionality at ultra-low power of RF energy harvesting system. Keywords - Energy Harvesting, Integrated Circuit, Microsensor Nodes, Radio Frequency.

    Download PDF: Performance of MOSFET Rectifier for Ultra-Low Power RF Energy Harvesting System
  8. Bridging The Gap Between Teaching and Researching in The Field of Visual Impairment

    Vassilios Argyropoulos, Magda Nikolaraizi

    Paper ID IA-ICSSHLOND-07089-12700 · Pages 33-36

    Abstract

    This paper highlights the framework and discusses the results of an action research network project which aimed to promote academic access in seven schools within which students with visual impairments were enrolled. The persons involved in this collaborative scheme were general teachers, special education teachers and academic staff, sighted students and students with visual impairments. The findings of the study indicated that the implementation of the action research network resulted in the development of an inclusive and collaborative thinking and the adoption of relevant teaching practices, strategies and techniques, which promoted the children’s access to the curriculum and supported the teachers’ and student teachers’ professional development. Keywords - Action Research, Special Education Teachers, Visual Impairment, Network.

    Download PDF: Bridging The Gap Between Teaching and Researching in The Field of Visual Impairment
  9. The Impact of Blockchain on Risk Mitigation in Islamic Finance: A New Mechanism To Mitigate Gharar Risks

    Omer Awad Hag Hamid

    Paper ID AE-ICEFAEDINB-07089-3371 · Pages 37-41

    Abstract

    The purpose of this paper is twofold: to explain the Islamic modes of finance nature-related features of risk, and investigate the use of blockchain technology in managing risk in Islamic finance. The major result is that the nature of manageable risks in Islamic and traditional finance exhibits similarities in many aspects. Nevertheless, the Islamic joint ventures and sales-based modes of finance are facing special type of risks. The most outstanding and unmanageable risk is related to Gharar . The paper emphasized that the traditional risk mitigation tools are unable to manage the special risk in the form of Gharar. Finally, the paper summarizes the potential contribution of blockchain technology in mitigating risks in the Islamic mode of finance (specially Gharar risk) and highlights its efficiency. Keywords - Blockchain, Risk Management, Gharar, Sharia Rule.

    Download PDF: The Impact of Blockchain on Risk Mitigation in Islamic Finance: A New Mechanism To Mitigate Gharar Risks
  10. Lessons Learned: Revamping Robotics Education to Meet 21st Century Needs

    Aleksandr Sergeyev, Scott Kuhl, Nasser Alaraje, Prince Ratta, Brandon Johnson

    Paper ID IA-ICCARVELOND-07089-10822 · Pages 42

    Abstract

    The rapid growth of robotics and automation, especially during the last few years, its current positive impact and future projections for impact on the United States economy are very promising. This rapid growth of robotic automation in all sectors of industry will require an enormous number of technically sound specialists with the skills in industrial robotics, automation, and controls to maintain and monitor existing robots, enhance development of future technologies, and educate users on implementation and applications. It is critical, therefore, that educational institutions adequately respond to this high demand for robotics specialists by developing robotic curriculum, providing opportunities for industrial certification programs in robotics, and developing software and hardware to enhance educational methodologies. Michigan Technological University in collaboration with Bay de Noc Community College secured National Science Foundation Advancing Technological Education (NSF ATE) grant to address all of the above. This sponsored project targets to impact broad student population: 2- and 4 year degree community college and university students, industry representatives, and displaced workers wishing to retool their skills in industrial robotics, automation and controls. Educators and researchers involved in this project not only developed an advanced robotic curriculum but also addressed such in high demand industrial certification in robotic, automation, and controls. In order to effectively teach concepts of industrial robotics, the curriculum needs to be supported by the hands on activities utilizing industrial robots or providing training on robotic simulation software. Nowadays, there is no robotic simulation software available to the academic institution at no cost which limits educational opportunities. As part of the NSF sponsored project, team of research faculty members and students from Michigan Tech are developing new, open source “RobotRun” robotic simulation software to be available at no cost for adaptation by the other institutions. In order of providing an additional degree of freedom in teaching emerging concepts of industrial robotics on the state-of-the art robotic hardware which is commonly prohibited for the educational institutions due to its cost, the project introduces a new concept of Teleoperated Robotic Workcell (TRW) with the available virtual robot technology to make a non-destructive remotely controlled robotic arm, to better teach students and researches about programming and control of a robotic arm. Since there is no commercially available remotely controlled robotic arm, and due to the expensive cost of robotic arms, students and researchers are often unable to test their programs on real robots. By applying the concept of a remote controlled robotic arm, the existing resources can be effectively shared with other universities to teach programming aspects of industrial robots. Using developed system, allowing the remote access to the physical robot, interested parties can develop and test their programs with a real robotic arm instead of simply working in robotic simulation environment. To broaden the impact, the project team has developed a standalone Robotic Educational Portal (REP) with in-depth educational tutorials and online lectures to complement the “RobotRun” simulation software and made it available online at no cost. This will allow current concepts related to industrial robotics to be taught even in locations without access to state-of-the-art robotics hardware. These tutorials and simulation software represent a complete training package. Thus, students from any institution, industry representatives, and displaced workers can be independently trained. This project gained significant national and international recognition and resulted in 24 articles in journals and conference proceedings and one book chapter. The project has also received significant media attention and has been covered by TV channels ABC10 and 3 Marquette, well known and read magazine Forbes has published 4 articles, and the local Upper Peninsula of Michigan, Daily Mining gazette has published 2 articles related to the overall project as well as high school teachers workshop at Michigan Tech. The main intend of the authors is to provide an overview of all the project activities and share the developed resources with educators, researchers and industry representatives. This will provide the vehicle for effective teaching methodologies to enhance knowledge base of college students and industry representatives in the field of industrial robotics, automation and controls, specialists of which nowadays are in such a high demand. Keywords - Robotics, Automation, Controls, Simulation Software

    Download PDF: Lessons Learned: Revamping Robotics Education to Meet 21st Century Needs
  11. Experiences of Teachers on The Implementation of E-Learning Project in Tshwane South District

    Gloria Maite Msiza, Khashane Stephen Malatji, Lydia Kgomotso Mphahlele

    Paper ID IA-ICSSHLOND-07089-12240 · Pages 43

    Abstract

    The E-learning project has been rolled out in Gauteng Province schools in an attempt to improve the quality of education as well as move towards paperless classroom. The purpose of this study was to investigate challenges faced by Tshwane South Secondary Schools with regards to implementation of E-learning project with the view to suggest possible solutions. The study followed a qualitative research approach with case study research design. Population in this study consisted of teachers, School Management Teams and learners. Purposive sampling was used to select two teachers, two learners and two School Management Teams that were on E-Learning committee. Data was collected through focus group interview. ADDIE’s model was used in this study which gave a theoretical lens on how instructional designer, training developer and educator should design and develop a program such as E-Learning. Thematic approach was used to analyze data The study found that teachers were not adequately trained prior to implementation and that impacted negatively on the project. Moreover, the study revealed other challenges that were related to theft of devices, poor infrastructure, poor communication, teachers’ attitudes, lack of self-motivation, parental involvement as well as poor monitoring of the use of the devices. The study recommended extensive training of both learners and teachers on the use of E-learning. Furthermore, it was recommended that restrictive devices be installed on the learners’ tablets to deny them access of non-academic websites. Keywords - E-Learning; Technology; Teaching, Paperless Classroom, Electronic Learning

    Download PDF: Experiences of Teachers on The Implementation of E-Learning Project in Tshwane South District
  12. Effect of Methyl Orange on Germination of Sorghum Vulgare and Phaseolus Mungo

    Fatimah Alshehrei

    Paper ID IA-ICENSLOND-07089-001 · Pages 50-52

    Abstract

    Azo dyes are toxic compounds and because of highly persistent to degrade, it can cause many environmental pollutions. Irrigation with waste water include theses dyes can affect soil fertility and growth of plant. In this study, treated and untreated methyl orange were tested to study their effect on the growth of two plants Sorghum vulgare and Phaseolusmungo.A higher concentration of untreateddyeinhibited the elongation of shoot androot of seedlings. Treated dye with bacteria showed a good germination for both plants. Keywords - Methyl orange, Sorghum vulgare , Phaseolus mungo, Phytotoxicity

    Download PDF: Effect of Methyl Orange on Germination of Sorghum Vulgare and Phaseolus Mungo