Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

31ST IASTEM INTERNATIONAL CONFERENCE, Pattaya, Thailand 23-08-2016

← All proceedings

Proceedings cover: 31ST IASTEM INTERNATIONAL CONFERENCE, Pattaya, Thailand 23-08-2016

31ST IASTEM INTERNATIONAL CONFERENCE

Pattaya, Thailand 23-08-2016

ISBN 978-93-86083-99-9

11 papers

  1. Process of BIM and Ontology-Based Automation For Estimation of Building Repair and Replacement Costs

    Jieun Park, Jungho Yu

    Paper ID IA-ICCAETHAI-23086-1891 · Pages 1-5

    Abstract

    It is important to consider initial construction costs and also maintenance cost, operation cost, and end-of-life costs, which together are called the life cycle cost (LCC). LCC analysis is compulsory in Korea per various regulations and systems. Increasingly, the construction industry must deal with a large amount of information and building information modeling (BIM) is now being implemented to address this issue. Therefore, it is inevitable that the use of BIM in construction and LCC analysis in the pre-construction phase will inevitably need to be brought together. This research proposes an ontological approach to automatic BIM-based estimation of repair and replacement costs. This will overcome current problems in cost estimation of repair and replacement. Such estimates are currently done thru a manual process that lends toward inefficiency and subjectivity. The proposed methodology of the study is as follows. First, analyze repair and replacement criteria currently applied overseas and in Korea. Second, define the route of extraction IFC (Industry Foundation Classes) data from the BIM model that describes each of the required elements for estimating repair and replacement costs. Finally, suggest a process of automation to estimate repair and replacement costs thru an Initial Construction Cost Estimation Ontology (ICCEO) that recommends the most adequate work item in order to map with cost information and the Repair and Replacement Cost Estimation Ontology (RRCEO) that refers to initial construction costs as recommended by ICCEO. Using the proposed process is more objective and accurate for obtaining estimated R&R costs. The use of IFC is more accurate and it is more consistent to infer appropriate R&R criteria and information based on ontology technology. Index Terms- BIM, LCC, Repair and Replacement(R&R) cost estimation, Semantic Web, Ontology, Automation system

    Download PDF: Process of BIM and Ontology-Based Automation For Estimation of Building Repair and Replacement Costs
  2. Application of BIM in Building Energy Efficiency Rating Certification

    Changjae Yeo, Jungho Yu

    Paper ID IA-ICCAETHAI-23086-1893 · Pages 6-9

    Abstract

    The enormous amount of design information and technical limitations of 2D methods in large construction projects have resulted in challenges with noncompliance, omissions and miswriting for existing 2D drawings-based construction information management. In Korea, it is mandatory to have objective information concerning energy for use in an Energy Performance Program (ECO2) for a Building Energy Efficiency Rating Evaluation. Currently, the Building Energy Efficiency Rating Evaluation utilizes 2D drawings where information is obtained and input manually, resulting in inefficiency and subjective judgment. This study aims to propose 'Methods for Applying BIM to Building Energy Efficiency Rating Certification work' in order to secure the accuracy and reliability of Energy Efficiency Rating Certification information and apply BIM to Korean Energy Efficiency Rating Certification work. It is expected that the methods proposed in this study can be applied to a Building Energy Efficiency Rating System in other countries that may face similar challenges. Index Terms- IFC(International Foundation Classes) , BIM(Building Information Modeling), BEER(Building Energy Efficiency Rating)

    Download PDF: Application of BIM in Building Energy Efficiency Rating Certification
  3. Process For Localizing and Applying PDRI Technique -Based on a Project Definition Rating Index

    Simhee Hong, Jungho Yu

    Paper ID IA-ICCAETHAI-23086-1894 · Pages 10-12

    Abstract

    Risk management at early stage of a construction project, is known as an effective method expected various benefits about costs and schedule. The Project Definition Rating Index(PDRI) by the Construction Industry Institute(CII) is one of the method defined project scope for reducing risks. In addition, the PDRI is verified by pilot projects for achieving benefits by a risk management. To use this method, However, we have to consider some of the aspect about applying the object. Because each countries guideline is different for performing construction. Therefore, This study is suggested four considerations to apply the PDRI and a process guideline for using PDRI in local situation. This method will enable to improve the development of the PDRI Process for reflecting domestic situations in various countries Keywords- Risk management, Project Definition Rating Index(PDRI), Project scope, The early phase of project

    Download PDF: Process For Localizing and Applying PDRI Technique -Based on a Project Definition Rating Index
  4. Analysis of Construction Manager Competencies For Quality Management

    Seoyoung. Jung, jungho. Yu

    Paper ID IA-ICCAETHAI-23086-1900 · Pages 13-16

    Abstract

    A construction manager (CM) in the construction industry performs construction management work with stakeholders and is involved in each stage of the construction project life cycle. As such, the competency of a construction manager is an important factor that directly affects the success of the construction work. In Korea, construction manager competencies are evaluated thru a qualification-oriented process. A limitation of this approach is that it only measures knowledge. Thus, this criteria is operated apart from asking about the completeness of a person’s skill sets or job experience as it applies to construction management. Therefore, in order to ensure that the production process meets the required standards, it is necessary to introduce a rating system to evaluate the competency of a construction manager. In this study evaluates the competency level of a construction manager through these elements. Current competencies evaluation methods are utilized to analyze the relation between competency level and the identified elements (years of experience, education and license) of the construction managers through survey analysis. The results of this paper may help in the development of a competency management system for construction managers. Index Terms- Construction Manager, Competency, Human Resource Management, Quality Management

    Download PDF: Analysis of Construction Manager Competencies For Quality Management
  5. The Effect of Strategic Planning and Quality Cultureon Employee Performancetoward TQM Implementation in Indonesian Gas Company

    Oliandes Sondakh

    Paper ID IA-ICEBMTHAI-23086-1593 · Pages 17-22

    Abstract

    The globalization of markets, the increased of economic interpenetration and the interdependence between economic actors require companies to redesign and modify their competitive strategy. Therefore, in order to improve performance and meet the challenges of competition, companies must perform acts on improving the overall activities of the company with an emphasis on flexibility and quality. Empirical studies that examine the relationship between TQM practices and corporate performance have been encountered in many operations management literatures. Thus, it is commonly to found the relationship between TQM with business performance in the research literature. However, on the other hand studies that specify in linking between TQM and employees performance are still lacking and relatively small. Therefore, this study will specifically examine and analyze the practices of strategic planning and quality culture on total quality management (TQM) implementation on employee performance. Based on assessments of literature review, it can be concluded that quality culture play a major role in affecting both TQM implementation and employee performance. Therefore, the common effects of quality culture on TQM implementation and employee performance are expected to be greater. However, that study is remained outside the scope of this paper and left for further studies. Additionally to solve the confusing results on the effect of strategic planning and TQM implementation on employee performance is transferred to the future studies. Keywords- Strategic Planning, Quality Culture, TQM Implementation, Employee Performance.

    Download PDF: The Effect of Strategic Planning and Quality Cultureon Employee Performancetoward TQM Implementation in Indonesian Gas Company
  6. Computational Approach to Improve the Performance of the Air-Turbine With Different Type Impeller Blades For the Dental Handpiece

    Makhsuda Juraeva, Bong Hwan Park, Kyung Jin Ryu, Dong Joo Song

    Paper ID IA-ICMAETHAI-23086-01 · Pages 23-27

    Abstract

    The high-speed dental air-turbine handpiece is widely used in cutting and polishing denture structure in dentistry. The handpiece has the air-turbine which rotates a cutting bur. The air-turbine impeller is rotated by the compressed-air. There are different blade types for the impeller such as flat, concave and gull. The gull and concave type impeller blades were selected for the air-turbine. The objective of the study was to investigate the flowfield of the air-turbine with the gull and concave types impeller blade and to compare the results. The computational domain of the air-turbine was computed usingANSYS CFX Computational Fluid Dynamics (CFD) software. The air-turbine with the concave and gull type impeller blade was analyzed and the results were evaluated by the velocity, pressure and the torque. The air-turbine with the concave type impeller blade had higher torque value than the air-turbine with the gull type impeller blade. Keywords— CFD, concave type blade, gull type blade, impeller, ANSYS CFX, immersed solid.

    Download PDF: Computational Approach to Improve the Performance of the Air-Turbine With Different Type Impeller Blades For the Dental Handpiece
  7. Computational Approach to Improve the Performance of the Air-Turbine With Gull Type Impeller Blade For the High-Speed Dental Handpiece

    Kyung Jin Ryu, Makhsuda Juraeva, Bong Hwan Park, Dong Joo Song

    Paper ID IA-ICMAETHAI-23086-02 · Pages 28-32

    Abstract

    The high-speed dental handpieceair-turbine is widely used in cutting and polishing denture structure in dentistry. The impeller of the air-turbine is the important part of the dental handpiece. The objective of the study was to investigate the flowfield of the air-turbine with the gull type impeller and to find the design variables for the optimization. The flowfield of the air-turbine was computed usingANSYS Fluent Computational Fluid Dynamics (CFD) software. The airflow inside the air-turbine was analyzed by changing the height and number of the impeller blade and location of the air inlet. The computed results were evaluated by the velocity, pressure and the torque. The torque value was increased when the height of the blade and connecting location of the air-inlet are changed. Keywords— CFD, Gull Type Impeller, Fluent, Moving Wall.

    Download PDF: Computational Approach to Improve the Performance of the Air-Turbine With Gull Type Impeller Blade For the High-Speed Dental Handpiece
  8. Evaluation of Hypolipidemic Activity of Coumarin Derivatives Isolated From Ionidium Suffruticosum in Rats Fed With High Fat Diet

    Kottai mUthu Arumugam, A. Kottai Muthu

    Paper ID IA-ICMBPSTHAI-23086-1761 · Pages 33-37

    Abstract

    The objective of the present study was to investigate the hypolipidemic effect of Coumarin derivatives isolated from Ionidium suffruticosum in rat fed with high fat diet. The acute toxicity study was found that Coumarin derivatives isolated from Ionidium suffruticosum are safe up to 100mg/kg, so one tenth of this dose (10mg/kg) was consider as evaluation dose. There was a noticed increase in the body weight in HFD fed group (II), which was significantly (p

    Download PDF: Evaluation of Hypolipidemic Activity of Coumarin Derivatives Isolated From Ionidium Suffruticosum in Rats Fed With High Fat Diet
  9. Isolation and Characterization of Anti-Diabetic Compound From Dregea Volubils [Benth.] Leaf

    Anton Smith Arul Gnanadhas, Venkatesan Natarajan, Kottai Muthu Arumugam, Parimalakrishnan Sundarrajan

    Paper ID IA-ICMBPSTHAI-23086-1770 · Pages 38-41

    Abstract

    The available drugs for diabetes, Insulin or Oral hypoglycemic agents have one or more side effects. Search for new antidiabetic drugs with minimal or no side effects from medicinal plants is a challenge according to WHO recommendations. In this aspect, the present study was undertaken to evaluate the effect of active compounds from Dregeavolubilis [Benth] leaves on serum glucose in normal and diabetic rats. Diabetes was induced by Streptozotocin (STZ) and High Fat Diet (HFD) in wistar rats. An isolated fraction of ethanolic extracts of Dregeavolubilis [Benth] (ETDV) was administered orally at a dose of 100 mg/kg, p.o. Metformin was used as standard anti diabetic drug (50 mg/kg, p.o). An isolated fractions showing for higher anti diabetic activity was subjected to column chromatography that led to isolation of a pure compound, which was given trivial name DV-1. The interesting results of our preliminary studies with the ETDV have motivated to isolate anti-diabetic active compounds from the leaves of DV for the management of hypoglycaemic activities. Collected fractions were subjected to anti-diabetic activity in STZ and HFD induced wistar rats. The fraction F from ETDV showed strong anti-diabetic activity on a par with the standard drug metformin. To ensure the compounds responsible for anti-diabetic activities associated with F respectively. In addition a column chromatographic analysis was carried out with F using various solvent systems and isolated compound named as DV-1 from the column which was amorphous powders with decomposition point. DV-1 is phenolic compound nature confirmed by spectral analysis. Reduction in the FBG by DV-1 indicates that DV-1 has anti diabetic efficacy and provides a scientific rationale for the use as an anti diabetic agent. Keywords— Blood glucose, Dregeavolubilis, Phenolic compound.

    Download PDF: Isolation and Characterization of Anti-Diabetic Compound From Dregea Volubils [Benth.] Leaf
  10. Analgesic Anti-Inflammatory and Hepatoprotective Activities of Aerial Parts of Flacourtia Sepiaria Roxb

    Kannappan N, Sreejith M

    Paper ID IA-ICMBPSTHAI-23086-1783 · Pages 42-48

    Abstract

    The present study was carried out to investigate the in vivo acute toxicity study, analgesic anti-inflammatory and hepatoprotective activities of various extracts of the aerial parts of Flacourtia sepiaria Roxb which belongs to the family of Flacourtiaceae. Flacourtia sepiaria is traditionally used as an antidote for snake poisoning, rheumatoid arthritis, gout and kidney diseases. The methanolic extract was found to be very safe up to 2000mg/kg body weight by acute toxicity model study as per the OECD guidelines 423. The methanol extract showed significant anti-nociceptive (analgesic) anti-inflammatory and hepatoprotective activities in a dose dependent manner. The methanol extract at the dose of 400 mg/kg exhibited significant anti-nociceptive anti- inflammatory and hepatoprotective activity. This activity can be attributed to the phenolic and flavonoid content in the methanol extract. Keywords— Flacourtia Sepiaria, Acute Toxicity, Analgesic, Anti-Inflammatory, Hepatoprotective.

    Download PDF: Analgesic Anti-Inflammatory and Hepatoprotective Activities of Aerial Parts of Flacourtia Sepiaria Roxb
  11. Work Measurement Approach to Determine Standard Time in Assembly Line

    Lusia Permata Sari Hartanti

    Paper ID IA-ICRAETHAI-23086-1657 · Pages 49-52

    Abstract

    Productivity measure output to input. Work measurement is a tool to increase productivity of industrial and business area. The aim of this research is to determine standardtime of assembly process. The research was conducted at a manufacture industry in Indonesia that produce plastic product. Several production lines in company are using manual process, for example assembly work station, where as a bottleneck workstation. Work measurement is conducted in order to improve the productivity of assembly workstation. Time study is working measurement technique consisting time measurement of worker that doing jobs in normal pace. Performance rating and allowance are added into observed time to calculate standard time. Index Terms— Productivity, Work measurement, Time Study, Standard Time.

    Download PDF: Work Measurement Approach to Determine Standard Time in Assembly Line