35TH IASTEM INTERNATIONAL CONFERENCE
Pattaya, Thailand 20-10-2016
ISBN 978-93-86291-22-6
6 papers
-
Design and Fabrication of Wireless Based Automated Car Parking Prototype System
Su Naing Myint, Min Min Oo
Paper ID IA-CARVETHAI-20106-01 · Pages 1-7
Download PDF: Design and Fabrication of Wireless Based Automated Car Parking Prototype SystemAbstract
Now a day’s numbers of cars have increased; because of this car parking is a big issue which in turn causes traffic jam problem. To overcome this problem, “Automated Car Parking System” is the best solution. The system is based on PIC and RFID. It consists of one main display at the ground floor which is basically counter that displays number of cars in each floor. In each slot consists IR sensor which indicate that parking space is available or not on that particular slots. There is facility of lift to carry the car to up and down. Movement of lift is controlled by motor. The driver will park his vehicle on a pallet at the platform of the car park. Then the sensor will detect the available empty parking spaces and display them on the LEDs panel. At the LEDs are providing to indicate position of lift. After the driver selects the desired parking space on the mobile phone, the vehicle will be transported to that parking space. In order to retrieve the vehicle, the driver will select the location of his vehicle on the mobile phone. The system will retrieve the vehicle from the parking space and send it back to the original position where the driver is waiting. There are three portions in automated car parking system. They are RFID system, car lift control system and Bluetooth serial system. For the RFID system, 13.56 MHz passive reader and tag pairs are used. In this system, human power is not used therefore error is less also required low space with provides highest security and greatest flexibility. No need for energy intensive ventilating system. Due to this advantage system used in public parking, rail station, airport, hotels, mall. Keywords- RFID module, PIC microcontroller, IR obstacle sensor, H-Bridge motor driver
-
Experimental Investigation of Cross-Flow Turbine
Nang Saing Nuet, Myat Myat Soe, Aung Myat Thu
Paper ID IA-ICMAETHAI-20106-01 · Pages 8-13
Download PDF: Experimental Investigation of Cross-Flow TurbineAbstract
The purpose of this study is both to test the performance of a low cost cross-flow turbine and to study on the efficiency of a low cost cross-flow turbine. In this research the maximum effective head 4.79 m and maximum flow rate 5.65×10-3 m3/s were occurred at gate valve fully open. The speed of the turbine is between 89 and 163 rpm depending on the flow rate. The maximum shaft power is 236.66 W and the maximum generator output power is 143 W at the gate valve fully open condition. The other objective of this work is to characterize the two stage power transfer in the runner. Theoretically, the first stage contribute 76.2% to the total torque (or power) production while the second stage produce the remaining, 26.8%. The maximum overall efficiency is 57%. Index Terms- Cross-Flow Turbine, Effective Head, Efficiency Performance, Torque.
-
Design and Performance Testing of A Small-Scaled Horizontal Axis Wind Turbine for Low Wind Speed Regions
Yin Yin Htay Aung, Myat Myat Soe, Aung Myat Thu
Paper ID IA-ICMAETHAI-20106-02 · Pages 14-19
Download PDF: Design and Performance Testing of A Small-Scaled Horizontal Axis Wind Turbine for Low Wind Speed RegionsAbstract
In this paper, locally developed small wind turbine was tested to observe power performance at low wind speed range of 1.5m/s to 6m/s. Thin airfoil was selected from well-known series for low Reynolds’ number due to low wind speed. SG 6043 airfoil was used for low Reynolds’ number 150,000 [12]. The turbine blades were fabricated from Ya-Ma-Nay wood because of its easily available, light weight, good strength, and low-cost. The design rotor swept area was 2 sq. meters and its design angle of attack was 5. Tip speed ratio was chosen 6 for three-bladed wooden wind turbine. The rotational speed of rotor was designed 500rpm at rated wind speed 6 m/s. Performance Testing was carried out on the roof of Main-Building at Mandalay Technological University, Mandalay. The wind turbine hub placed 16 m above the ground. The experimental data were measured every 15 minutes. Instantaneous cut-in wind speed occurred around 3.5 m/s and average cut-in wind speed occurred 2.5 m/s. The power versus velocity curves were shown for the turbine blades’ performance. Index Terms- Low wind speed, performance test, thin airfoil, Ya-Ma-Nay wood.
-
Design, Construction And Performance Test Of Cross-Flow Turbine
Zar Ni Tin Win, Htay Htay Win, Myint Thein
Paper ID IA-ICMAETHAI-20106-03 · Pages 20-25
Download PDF: Design, Construction And Performance Test Of Cross-Flow TurbineAbstract
Myanmar is a developing country that has perennial rivers and topographies that are mountainous. Electricity is the main component to develop a country. Currently, 80% of the electricity is produced from the hydropower by using hydro turbines. For hilly regions, cross-flow turbine is the suitable type for producing electricity. The objective of this paper is to test the performance of the constructed cross-flow turbine and verify that all parts and systems installed in the cross-flow turbine are working fine and performing their functions correctly. Cross-flow turbines can be applied over a head range from less than 2 m to more than 100 m. A cross-flow turbine has been considered, designed and constructed based on design specification. The designed cross-flow turbine is capable of producing up to 300 W AC power at the head of 6 m and flow rate of 0.0091 m3/s. The performance test conducted at selected site location by changing the water flow rate and nozzle guide vane. Maximum efficiency was at middle position of nozzle guide vane with flow rate 0.0091 m3/s and producing 260W with efficiency 86%. Index Terms- construction, cross-flow turbine, design, hydropower, performance test
-
Investigation of Anti-Venom Potential of Mimosa Pigra Stem Bark Against Snake Envenomation
Badgujar Vishal Bhagwan, Norsafwanhadi Bin Nor Afendi
Paper ID IA-ICMBPSTHAI-20106-2177 · Pages 26
Download PDF: Investigation of Anti-Venom Potential of Mimosa Pigra Stem Bark Against Snake EnvenomationAbstract
Snakebites represent a public health problem in numerous countries. In Malaysia, the common cobra (Naja kaouthia) is responsible for most bites, which display varied clinical complications. Since several plant extracts rich in pharmacologically active compounds have shown to antagonize venom of several species. Mimosa pigra a small prickly shrubthat infests wetlands and is also an agricultural weed in rice fields in many parts of the old world tropics,has been used against snakebite by the traditional healers in African jungles. However, there is paucity of scientific data in support. This study was aimed to evaluate the antivenom potential of methanol extract of stem bark of Mimosa pigra against Ophiophagus hannah(King cobra), Calloselasma rhodostoma (Malayan pit viper), Bungarus fasciatus (Banded krait) and Naja kaouthia (Cobra) venoms. The extract inhibited the phospholipase, platelet aggregation and haemolysis effects at varying concentrations. The phospholipase A2 enzyme responsible for inflammation and pain was significantly inhibited by Mimosa pigra extract at different concentrations. The highest inhibition was observed against Malayan pit viper and Cobra venom. When tested in vitro, the M. pigra extract inhibited ADP induced platelet aggregation at varying concentrations. The methanol extract also inhibited haemolysis induced by these snake venoms. The highest effect was observed against King cobra and Malayan pit viper. These results validated folk claims made by traditional healers’and exhibits the potential use of M. pigra as an antivenom agent of plant origin against four poisonous snake venoms found in Malaysia. However, further investigations are required to establish that M. pigra has potential for treating different snakebites. Keywords- Mimosa pigra, snake venom, Malaysia
-
The Role of Knowledge Management in Developing The Talents Performance in Organizations
Hossam Korany Ahmed
Paper ID IA-ICSTMPATY-20106-01 · Pages 27-33
Download PDF: The Role of Knowledge Management in Developing The Talents Performance in OrganizationsAbstract
This study aims to determine the impact of Knowledge Management factors on Talent Performance. This paper discusses the possibility of a growing tension between talent progression and capability development which emerges as a result of Knowledge Management and Talent Management strategies. It is argued that the inter-relationship between the increasing trend to develop Knowledge Management strategies leads to developing Talent Management in the organization. Merging of the two concepts, KM&TM , has so far been considered only by human resource scholars who have tended to examine how learning from the field of KM can achieve TM goals. Talent management involves the practice of continuously discovering, developing, using and retaining those people in an organization who are especially valuable in terms of having a great potential for the future of the organization. The knowledge management system includes all of the interacting and interdependent elements that pertain to monitoring and controlling knowledge like: creating knowledge, evaluating knowledge, using knowledge and sharing knowledge. This paper clarifies the knowledge management and reviews various techniques for knowledge representation and examines how the principles of knowledge management (KM) can be used to enhance an organization's talent management (TM). Keywords- KM (knowledge knowledge), TM (talent management), HRM (human resource management), talent management effectiveness assessment, talent development, supporting knowledge exchange, creating knowledge, evaluating knowledge, using knowledge.