IASTEM INTERNATIONAL CONFERENCE
Singapore 20-01-2023
5 papers
-
Development of Competitive Algal Growth Model Applicable to Various Nutrient Concentrations for Cyanobacterial Blooms Suppression
Jingnan Li, Yoshimasa Amano, Motoi Machida
Paper ID IA-ICENSING-200123-15636 · Pages 1-6
Download PDF: Development of Competitive Algal Growth Model Applicable to Various Nutrient Concentrations for Cyanobacterial Blooms SuppressionAbstract
The algal blooms outbreak in lakes has caused severe water safe problems worldwide due to eutrophication. Though there has been an algae growth model developed by our team, the overestimation of the amount of nutrient absorb for algae was always observed in this previous model, especially under low temperatures, due to the use of the Michaelis-Menten model for nutrient uptake term. In this study, monoculture experiments of Microcystis sp. and its competitor C. meneghiniana were conducted to examine their growth and estimate their nutrient uptake parameters under low temperature (20oC). Competition experiments were also conducted under various nitrogen concentrations and dilution rates at 20oC to explore the different nutrient uptake characteristics of the two species. Based on the experimental results, the nutrient uptake term was further derived. The result showed that the overestimation was reduced, and the accuracy of the model prediction was improved. The determination coefficient increased mostly from R2 = 0.26 to R2 = 0.84. Keywords - Cyanobacteria, Growth Model, Michaelis-Menten Model, Nutrient Uptake
-
A Numerical Study of the Hydraulic and Thermal Performance of MCHS Containing Nanofluids with Porous Substrates
Huda Ridha
Paper ID SF-ASET-SGPR-210123-888 · Pages 7-12
Download PDF: A Numerical Study of the Hydraulic and Thermal Performance of MCHS Containing Nanofluids with Porous SubstratesAbstract
The use of microchannel heat sinks with porous media has been shown to reduce pressure drop and improve heat transfer. An optimization study is presented in this study that evaluates the impacts of porous thickness on the hydoplics and thermal performance of porous microchannel heat sinks (MCHS). Pressure drops increased with increased porous thickness. However, there is not an optimum pressure drop. Adding a porous structure improves heat transfer for fins in the thickness range studied in this paper. Heat transfer coefficients have been found to be exponentially related to solid thicknesses for all solid thicknesses. Moreover, when the fraction of nanofluid volume increases, so does the heat transfer coefficient and Reynolds number. A velocity of 1.2 m/s caused the greatest change in pressure drop and heat transfer coefficient with porous thickness. Variations of the parameters decrease with decreasing velocity. Keywords - Microchannel, Heatsink, Porous, Heat transfer, Nanofluid, Optimization
-
Assessment of Surface Water Quality Distribution to Identify Risky Areas of Reinforced Concrete Structure Deterioration: A Case Study along Saranarai Road (Highway No. 205), Non Thai District, Nakhon Ratchasima, Thailand
Bantita Terakulsatit, Sakchai Glumglomjit, Rattanaphorn Hanta, Thanet Phuphlub, Mallika Nguanthaisong
Paper ID IM-ICRASET-SGPR-190123-1555 · Pages 13-19
Download PDF: Assessment of Surface Water Quality Distribution to Identify Risky Areas of Reinforced Concrete Structure Deterioration: A Case Study along Saranarai Road (Highway No. 205), Non Thai District, Nakhon Ratchasima, ThailandAbstract
The aims of this study were to observe, analyze, and classify the surface water quality to identify risky areas of reinforced concrete structure deterioration buildings along Suranarai road (highway No. 205), Non Thai district, Nakhon Ratchasima province, Thailand. Twenty-nine surface water samples were collected from the study area, and temperature, electrical conductivity (EC), resistivity, pH, total dissolved solids (TDS), and salinity were tested by Hanna. Chloride content was analyzed by the titrations method, and ions of Ca2+, Mg2+, K+, Fe2+, and Na+were analyzed by atomic absorption spectroscopy (AAS). From the water quality distribution results, the order of abundance is Na+>Ca2+>Mg2+>K+>Fe2+. The high chloride, sodium, salinity, and TDS concentrations were dominantly represented in the study area (Dan Chak, Non Thai, and Sai-O sub-districts), indicating the brackish water and some saline water. In addition, the correlation tendency of chloride, sodium, salinity, TDS, iron, and pH values will cause risk effects on highly deteriorated reinforced concrete in the study area. These risk areas are represented in the dense community and lowland area in Non Thai sub-district at the Na Wah pond and Khlong Dan River, respectively. In summary, these obtained results can be used to identify the boundary and location for basic information and guidelines for monitoring and solving problems of reinforced concrete structures to prolong service life and increase efficiency in this saline area. Keywords - Chloride, Salinity, Saline Soil, Maha Sarakham Formation, Concrete Corrosion.
-
Analysis of Stress and Temperature Distribution in Friction Stir Welding using Numerical Simulation
K. Vasu, H. Chelladurai, Ashutosh Kumar, Deepak Kumar Prasad
Paper ID IA-ICMAESING-200123-15594 · Pages 20-25
Download PDF: Analysis of Stress and Temperature Distribution in Friction Stir Welding using Numerical SimulationAbstract
In this paper the stress and temperature distribution of friction stir welding have been analysed by using numerical simulation. Several attributes of FSW were analysed such as tool-work piece surface interaction, plastic deformation, and friction-induced heat generation. A nonlinear redirect coupled-field study has been conducted to study the work piece's thermal and mechanical properties of the FSW process. Stresses, Temperature distribution and isotherms are obtained by giving input parameters viz. normal force, shoulder diameter, rotational speed, and feed to the tool. The results obtained from the simulation in ABAQUS software were validated with experimental results published by other researchers. It was noticed that peak temperature value during the welding was lesser dependent on the tool shoulder diameter than other parameters. Keywords - Friction Stir Welding, Numerical Simulation, Stress Distribution, Temperature Distribution
-
Survival of Beneficial Microbes in Liquid Biofertilizer Amended with Different Carrier Materials
Sayma Serine Chompa, Ali Tan Kee Zuan, Adibahmohd Amin, Tan Geok Hun, Amir Hamzahahmad Ghazali
Paper ID IA-ICENSSNPR-200123-15513A · Pages 26
Download PDF: Survival of Beneficial Microbes in Liquid Biofertilizer Amended with Different Carrier MaterialsAbstract
Salinity has emerged as one of the most severe environmental stresses on agricultural plants. It has become an obstacle to meeting the world's increasing food demand, which causes a global economic loss of up to US$ 27.3 billion. Soil salinity in rice cultivation areas is considered a severely limiting factor that adversely affects the quantity and quality of wetland rice production. Recently, the alternative use of salt-tolerant plant growth-promoting rhizobacteria (PGPR) inhabiting extremesaline conditions has gained remarkable attention and has positive impacts on soil and crops. These microbes invade plant roots, promote plant growth, and improve crop yield production. Multi-strain salt-tolerant rhizobacteria such as Bacillus tequilensis and Bacillus aryabhattai strains is a type of PGPR with a short shelf-life due to its structural and cellular components, with a non-producing resistance structure (spores). Therefore, optimum formulations must be developed to prolong the bacterial shelf-life by adding liquid carrier materials as an amendment that could benefit the microbes by providing shelter and carbon sources as food for bacteria. Therefore, a study has been undertaken to develop a liquid biofertilizer formulation from locally isolated multi-strain salt tolerant PGPR, using glycerol, trehalose and polyvinylpyrrolidone (PVP) as additives. The liquid carrier formulation was validated using an optimum amount of the cell protectants or chemical amendments, namely Glycerol (5 mM), Trehalose (10 mM), and polyvinyl pyrrolidone (PVP) at (1 %). The selected amendments were added in the tryptic soy broth (TSB) growth media and inoculated with Bacillus tequilensis(UPMRB9) and Bacillus aryabhattai (UPMRE6)and the combination of both strains. The shelf-life was recorded, and viable cells count, optical density and bacterial dry mass were used to determine the bacterial population and growth trend at monthly intervals. Determination of the optimal formulation of organic fertilizer to achieve maximum cell density of the strains were performed through the two-level factorial design and central composite design using Response Surface Methodology (RSM) concept. After eight months of incubation, the initial population were highest in the mixed strain amended with trehalose at 85.67 cfu g-1, followed by UPMRE6 and UPMRB9 at 72.67cfu g-1, and 70.34cfu g-1.The mixed strain also significantly stimulated theoptical density and recorded the highest value at 1.80, followed by UPMRB9 and UPMRE6 at 1.76 and1.69 respectively.After six-month, the population were started to decrease, and the maximum population and density was recorded with mixed strain amended with trehalose additive at 76.34 cfu g-1 and 1.84 respectively.Results showed that anoptimal concentration of trehalose has successfully prolonged the bacterial shelf-life with minimal cell loss.Validation of the quadratic optimization through response surface methodology wasrevealed that the cell density of the missed strainwas 42.78 log CFU/mL after 24 h which was 99.7% accuracy towards the predicted valuein minimized medium formulation: 0.267 g/ml Trehalose, 1% Glycerol, 120 rpm agitation. Keywords - PGPR, Additives, Shelf-life, Bio formulation, RSM