IASTEM INTERNATIONAL CONFERENCE
Kuala Lumpur, Malaysia 01-06-2024
9 papers
-
Groundwater Protection During Wellbore Drilling
Borivoje Pašić, Igor Medved, Nediljka Gaurina-Međimurec, Karim El Sabeh, Petar Mijić
Paper ID IA-ICENSKUALA-010624-001 · Pages 1-4
Download PDF: Groundwater Protection During Wellbore DrillingAbstract
During drilling operations special attention must be addressed to the adequate design (proper composition) of the mud used during drilling, especially the one used during the drilling for running surface casing that passes through the aquifer. Also, in next phase it is necessary to properly design the cement slurry, since casing must be cemented in place, in order to insulate the underground sources of drinking water (USDW) with quality cement sheath. Although during drilling there is a risk of groundwater pollution, it is necessary to take into account the pollution that can occur many years after the well is drilled, during the use of the well for various purposes such as production or injection of fluids, as well as after the well is abandoned. This paper will present the possible pollution of groundwater during drilling and possible migration paths of fluids into angroundwater duringthe entire lifetime of the well. Keywords - Drilling, Mud, Cementing, Migration Paths of Fluids Into An Aquifer, Groundwater Protection
-
Reducing Torque and Drag in Extended Reach Wells
Karim El Sabeh, Borivoje Pašić, Nediljka Gaurina-Međimurec, Petar Mijić, Igor Medved
Paper ID IA-ICENSKUALA-010624-002 · Pages 5-8
Download PDF: Reducing Torque and Drag in Extended Reach WellsAbstract
Drilling an extended reach well acquires precise engineering in drilling the deviated and horizontal section of the well as there are a lot of technical problems that can appear in these sections. The biggest issues that appear in the deviated and horizontal sections of the well are high values of friction factor that leads to high values of torque and drag, material wear of the joints, and inadequate cleaning of the well from cuttings. High values of torque moment and drag force represent a big problem when drilling directional wells, and in general affect the possibility of reaching the designed path of the well. One of the solutions to reduce torque and drag is to applicate lubricants in the drilling fluid to reduce the friction that appears when drill string is in contact with casing or borehole. Normally one method doesn't always solve the issue alone, so in conjunction with adding lubricants to water-based mud system, another solution is to add a protective ring on the tool joints/pipe body of the drill string that would be made from materials that could reduce friction and wear. Protective rings would be made from materials that have been used in the industry to produce various mechanical elements. In this paper lubricants will be tested in different concentrations to conclude the optimal concentration to be used in water-based drilling fluid and which material for the protective rings to be used for eventual practical use. Keywords - Extended Reach Drilling, Friction Factor, Torque And Drag, Mechanical Wear, Lubricants, Protective Ring.
-
DEMONSTRATION OF SYNAPTIC CHARACTERISTICS OF Ti/BaOx/n+-Si DEVICE
MIN-YIHSU, CHIH-CHIEH HSU
Paper ID IE-MEEE-KLMPR-300524-7833 · Pages 9
Download PDF: DEMONSTRATION OF SYNAPTIC CHARACTERISTICS OF Ti/BaOx/n+-Si DEVICEAbstract
Recently, there has been an increasing requirement for computing performance and efficiency. Traditional Von Neumann architecture, whose principle is to separate the central processing unit (CPU) and memory, not only limits the performance of the computer but also causes a large amount of energy consumption. Artificial synaptic device has been widely recognized as a solution to solve theVon Neumann bottleneck. Among semiconductor devices, resistive random-access memory device is considered suitable for realizing artificial synapses. In this study,a barium oxide (BaOx)synaptic device is proposed. The BaOxactive layer was deposited on a n+-Si substrate using a sol-gel process.Then, theBaOx/n+-Si sample was annealed at 500 °Cin vacuum for 30 min.The BaOx was cured and densified because of the high-temperature annealing.After that,a thermal evaporator with a shadow mask was used to deposit and patternTi metal on the BaOx active layer as top electrodes. Theartificial synaptic behavior of the Ti/BaOx/n+-Si device was evaluated using DC voltagesweeps and voltage pulses.Fig. 1 shows current-voltage characteristics of the Ti/BaOx/n+-Si device measured with a DC voltage cycle of 0 ïƒ -6 V ïƒ 0ïƒ 6 V ïƒ 0.When the first negative voltage sweep is applied to the Ti electrode, oxygenions in the BaOx layer are gradually repelled, resultingin generation ofoxygen vacancies.The conductance of theBaOx synaptic device gradually increases. Therefore, when the voltage sweeps backward from -6 V to 0, the device shows a higher conduction current. In contrast, when a positive voltage is applied to the Ti electrode, oxygen ions in the BaOx layer are attractedto fill the oxygen vacancies, leading to a decrease in oxygen vacancy content of the device. The conductance of the BaOx synaptic device gradually decreases. Hence, the device shows a lower current when the voltage sweeps back from 6 V to 0. The conductance modification of the BaOx device is dominated by oxygen vacancy content in the BaOxactive layer.Fig. 2 revealssynaptic characteristics of the BaOx device. The device conductance can gradually increase with increasing pulse number, demonstrating a synapticpotentiation behavior.Synaptic depression function can also be successfully obtained when successive positive voltage pulses are applied to the device.Satisfactory linearitiesin potentiation and depression characteristicsare observed.Moreover, paired pulse facilitation effect and spike-timing-dependent-plasticity (STDP) behavior can also be mimicked by the Ti/BaOx/n+-Si device.This study demonstrates synaptic functionsof the Ti/BaOx/n+-Si device.Artificial synapses are crucial to advancement of artificial intelligence and neuroscience. The proposed BaOxsynaptic device will contribute to the development of future neuromorphic computing systems. Keywords - Barium Oxide(BaO), Artificial Synapse, Neuromorphic Computing
-
HfZrO WRITE-ONCE-READ-MANY MEMORY FABRICATED USING A SIMPLIFIED AND LOW-COST SOL-GEL PROCESS
ZI-RONGQIU, XUAN-ZHI ZHANG, CHIH-CHIEH HSU
Paper ID IE-MEES-KLMPR-300524-7837 · Pages 10
Download PDF: HfZrO WRITE-ONCE-READ-MANY MEMORY FABRICATED USING A SIMPLIFIED AND LOW-COST SOL-GEL PROCESSAbstract
This study demonstrates write-once-read-many (WORM)memory characteristics of a Ti/HfZrO/n+-Si device. TheHfZrO thin film, which was synthesized using a sol-gel process, was spin-coated on a heavily doped silicon (n+-Si) substrate as a switching layer.Then, the sample was annealed in a furnace at 700 °C for 1 hour under flowing O2.The Ti top electrode was deposited using thermal evaporation to obtain aTi/HfZrO/n+-Si WORM memory. Fig. 1 shows WORMcharacteristics of the memory.When a positive bias is applied to the Ti top electrode of the device, oxygen ions are attracted to the electrode because of the external applied electric field. Numerous oxygen vacancies are created in the HfZrO layer.Eventually,the oxygen vacancies connect to each other and form a conductive path in the HfZrO film. A sudden current increase is obtained and the memory switches from a high-resistance state (HRS) to a low-resistance state (LRS). The LRS/HRS current ratio is 107, and the writing voltage is about 4 V.The conductive path cannot be ruptured even thoughthe applied voltage is reversed. This is because the conductive path is formed by plentiful oxygen vacancies and it is difficult to be dissociated bythe following voltage sweeps. We also tested the data retention capabilities and read disturb immunities of theHfZrO WORM memory at 25 and 85 °C. As shown in Fig. 2 (a),the HRS and LRS show no degradation during 104 s tests at 25 and 85 ℃, and anLRS/HRS current ratioof 107 is clearly observed. Fig. 2(b) reveals that the HRS and LRS can still remain stableeven under a constant voltage stress.The LRS/HRS current ratio shows no degradation, and the predicteddevice lifetime is more than 10 years.The proposed low-cost sol-gel HfZrO WORM memory will help enhance the efficiency of data storage systems and ensure the reliability of secure informationarchiving. Keywords - write-once-read-many (WORM),HfZrO,oxygen vacancy,resistive memory
-
BARIUM TITANATE PEROVSKITE BIPOLAR RESISTIVE MEMORYWITH AN ULTRA-HIGH RESISTIVE WINDOW OF 106
ZHENG-KAI XIAO, WUN-CIANGJHANG, CHIH-CHIEH HSU
Paper ID IE-MEES-KLMPR-300524-7838 · Pages 11
Download PDF: BARIUM TITANATE PEROVSKITE BIPOLAR RESISTIVE MEMORYWITH AN ULTRA-HIGH RESISTIVE WINDOW OF 106Abstract
This study demonstrates an inorganic perovskite barium titanate (BaTiOx) resistive memory with a high OFF/ON resistance ratio of 106. The BaTiOx resistive switching layer was deposited on a n+-Si substrate using a radio-frequency sputtering process under flowingAr and O2 gases with flow rates of 3 and 6 sccm. After that, Ag top electrodes were deposited using anevaporator. Current-voltage characteristics, as revealed in Fig. 1, show thatthe Ag/BaTiOx/n+-Si device can switch from a high-resistance state(OFF state) to a low-resistance state (ON state) at around 4 V when the voltage applied to the Ag top electrode sweeps from 0 to 5 V andit can reset from the ON state to theOFF state when the applied voltage sweeps to the negative region. The reset voltage is ~–3 V andthe OFF/ON resistance ratio is 106. Data retention test indicates that the OFF and ON-state resistances have no significant degradation for over 8 ×103 s, as shown in Fig. 2. The device lifespan estimated by an extrapolation method is over 10 years. Furthermore, the device can repeatedly set and reset over 300 times. The resistive switching behavior of the Ag/BaTiOx/n+-Si device is caused by the formation and rupture of Ag conductive filaments in the BaTiOx resistive switching layer.When applying a voltage to the Ag electrode, Ag ions driftinto the BaTiOx layer and form Ag conductive filaments.The device switches from an OFF to an ON state. As a negative bias is applied to the Ag electrode, the Ag ions in the conductive filaments are attracted back to the electrode, resulting in rupture of Ag conductive filaments. The device switchesback from ON to OFF state.Electrical characteristics of the device measured under different voltage cycles and temperature dependence of the ON-state resistance are investigated to confirm the validity of the proposed resistive switching mechanism.We also found thatthe stoichiometry of the BaTiOxresistive switching layercan be controlled by modifying the oxygen flow rate during the sputtering process, which can lead to an improved device stability.The proposed BaTiOx resistive memory shows great potential for future high-performance and high-density storage applications. Keywords - Perovskite, Barium Titanate (BaTiOX), Bipolar, Resistive Switching, Resistive Random-Access Memory (RRAM)
-
Study on Length Measurement Methods Using Optical Frequency Combs Modulated In The Radio Frequency Domain
Keito Nagata, Ryoshu Furutani
Paper ID IG-WCASETKLMP-010624-867 · Pages 12-15
Download PDF: Study on Length Measurement Methods Using Optical Frequency Combs Modulated In The Radio Frequency DomainAbstract
The optical frequency of an optical frequency comb can be expressed in terms of frequencies in the microwave band and is called a measure of light. Optical frequency comb devices are expensive laser transmitters, and they are difficult to conduct research using commercially available products. In this study, we measured distances using a low-cost optical frequency comb device and quantitatively evaluated the error. To measure the phase difference, we adjusted the electrical signal using a frequency doubler, double-balanced mixer, and preamplifier. Keywords - Measurement, Frequency Comb, Repetition frequency.
-
The Future of Human Rights Education in Hong Kong: A Comparative Analysis With Macao
Xiang Rong
Paper ID RF-CLSKL-180524-10549 · Pages 16-24
Download PDF: The Future of Human Rights Education in Hong Kong: A Comparative Analysis With MacaoAbstract
Starting in 2024, Hong Kong's human rights education curriculum covers the brand new subject of Civic and Social Development. In the past decade, the failure of Liberal Studies has hurt Hong Kong citizens, especially young students, deeply. Human rights education in Hong Kong remains ambiguous.By comparing with the successful human rights education experience of Macao, the problem is solved through educational legislation and pedagogical reforms. This article is divided into the following five sections, introduction, human rights education in the perspective of international law, review and issues of human rights education in Hong Kong, comparison and discussion between Hong Kong and Macao, and recommendation for the future of human rights education in Hong Kong. Keywords - Hong Kong,Macao,Human Rights Education,Liberal Studies,Civic and Social Development, Character and Citizenship
-
THE NEW BUSINESS CLIMATE: BANI
DR. MYTHILI KOLLURU
Paper ID IA-ICEBMKUALA-010624-004A · Pages 56
Download PDF: THE NEW BUSINESS CLIMATE: BANIAbstract
The BANI (brittle, anxious, nonlinear, and incomprehensible) framework, coined by James Cascio in 2016, reflects the rapidly evolving world accelerated by the COVID-19 pandemic. It describes the contemporary business climate characterized by fragility, heightened anxiety, disconnected cause-and-effect relationships, and complexities that defy understanding. The BANI framework encompasses the characteristics of our modern world.The framework consists of the following components.Brittle: organizations that may outwardly appear reliable, flexible, and unbreakable even though they are on the verge of collapse. Anxious: heightened anxiety, a common feature of the new business model. Leaders and employees will face more anxiety due to the increase in uncertainties. Nonlinear: now, the business environment is not just VUCA but is characterized by nonlinearity. A nonlinear world is one in which there is a disconnection between cause and effect in time, proportion, and perception. In the corporate world, leaders will experience the cause-and-effect relationship becoming nonlinear.Incomprehensible: the intricacies and complexities will make the world incomprehensible. The BANI environment emphasizes the need for organizations to be flexible, adaptable, and innovative in addressing global challenges. Developments like Brexit, the rise of populism, the Syrian refugee crisis, and increased data breaches demonstrate the modern world's brittleness, anxiety, nonlinearity, and incomprehensibility.The pandemic revealed systems' fragility, caused supply chain disruptions, and accelerated the adoption of technologies like AI, blockchain, and 5G. Climate change impacts, geopolitical tensions, and ongoing conflicts exhibit BANI characteristics.In the BANI world, leadership plays a crucial role. Leaders must embrace uncertainty and prioritize contingency planning and risk management. Collaboration, adaptability, strategic agility, and organizational transformation will be critical success factors, underscoring the importance of leadership in navigating these turbulent times.Businesses must build necessary capabilities, such as communication, digital skills, strategic thinking, and problem-solving. Promoting transparency, creativity, and innovation through psychological safety will also be critical.In conclusion, the BANI environment is the new normal, a landscape where opportunity is entangled amid chaos. It's a world that demands change, transformation, and adaptation. However, it also presents fertile ground for growth and innovation. Leaders must change mindsets, transform strategies, and adapt organizations to navigate this ever-changing landscape, with a heightened world perception needed to traverse unique paths in an increasingly fragile and complex world. Keywords: BANI, Business, New-Normal, Business Climate, Strategy
-
CLIMATE ACTION THROUGH EFFECTIVE COMMUNICATION: INSIGHTS, STRATEGIES, AND FUTURE DIRECTIONS
VIVEK KUMAR GAURAV
Paper ID IA-ICENSKUALA-010624-003A · Pages 57
Download PDF: CLIMATE ACTION THROUGH EFFECTIVE COMMUNICATION: INSIGHTS, STRATEGIES, AND FUTURE DIRECTIONSAbstract
Climate change communication is crucial for tackling the complex challenges posed by climate change. Effective strategies are vital for spreading scientific knowledge, raising awareness, mobilizing public support, and promoting actions at individual, community, and policy levels. Over the past decade, there has been a surge in academic research and practical experimentation aimed at enhancing climate change communication (CCC). This work often involves psychologists, communication scholars, political scientists, and other social scientists who apply their theories and methods to improve how we communicate about climate change with diverse audiences. The presentation highlights the scientific foundations of CCC and its potential to drive solutions for climate change mitigation and adaptation. It emphasizes that scientifically informed strategies draw from psychology, sociology, and communication studies to create messages that resonate with various groups. Understanding the cognitive, emotional, and social factors that influence how people perceive climate change is essential for developing messages that effectively engage and motivate action. Climate change communication promotes dialogue, collaboration, and collective action among stakeholders, including policymakers, scientists, businesses, and communities. By facilitating knowledge exchange, building consensus, and encouraging behaviour change, CCC efforts help implement climate policies, develop sustainable technologies, and promote resilience-building measures. The presentation also underscores the importance of evidence-based strategies in addressing climate change and calls for ongoing research, innovation, and collaboration to improve CCC effectiveness. The presentation overall will explore key insights, best practices, and future directions in the field, emphasizing the critical role of climate change communication in achieving climate action and sustainability goals. Keywords - Climate Change, Climate Change Communication, Sustainability, Climate action, Collective actions