Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

IASTEM INTERNATIONAL CONFERENCE, Manila, Philippines 28-03-2017

← All proceedings

Proceedings cover: IASTEM INTERNATIONAL CONFERENCE, Manila, Philippines 28-03-2017

IASTEM INTERNATIONAL CONFERENCE

Manila, Philippines 28-03-2017

4 papers

  1. Shear Strength Stabilization Using Burned Sludge Ash

    Mousa Attom, Mortula, Md Maruf, Alsharif, Munjed

    Paper ID IA-ICCAEMANI-28037-01 · Pages 1-4

    Abstract

    This research studied the potential use of burned sludge ash to improve the shear strength parameters of clayey soils. The sludge ash was obtained by burning the sludge at 550 °C. Two types of clay soils were used in this study and the initial physical properties such as Atterberg’s limit, gradation, compaction parameters were determined. The selection of the soils was based on plasticity index and clay fraction. The sludge ash was mixed with the soil at different percentages by dry weight of the soil at 2.5% increment. Standard Direct shear test (ASTM-D3080) was conducted on specimen mixed with sludge ash. The results showed that the increase in the sludge ash up to 7.5% will increase both the cohesion and angle of internal friction. Further increase of the sludge ash will reduce both the angle of internal friction and the cohesion in the two soils. However highly plastic clay soil (CH) shows a higher increase in the percentages of the shear strength parameters than low plastic soil (CL) for the same percentages of the burned sludge. The result of this research implies that sludge ash can be used to stabilize the soil and further reduce the environmental hazard associated with this material. Keywords- Soil, Sludge Ash, Shear Strength, Cohesion, Clay

    Download PDF: Shear Strength Stabilization Using Burned Sludge Ash
  2. Analysis of Emission Compliance Violations Using Self Organizing Map

    Jennifer T. Carpio, Shaneth C. Ambat

    Paper ID IA-ICENSMANI-28037-3232 · Pages 5-10

    Abstract

    This study aims to explore the utility of Self Organizing Map (SOM) algorithm as an exploration instrument in analyzing violations in emission test results in the Philippines. A case of real-life data mining was performed using a dataset consisting of show cause orders issued by the Land Transportation Office (LTO) to erring Private Emission Testing Centers (PETCs) conducting non-appearance test violations from calendar year 2010 to the second quarter of 2016. The possibilities offered by the visualizations generated by SOM was explored to determine how it can be used to produce information that can support policy enhancement of the concerned government agency with the goal of minimizing, if not to totally eradicating, the occurrence of non-appearance testing violations that can lead to detrimental and more adverse air pollution in the country. Index Terms- emission test, nonappearance, self organizing map.

    Download PDF: Analysis of Emission Compliance Violations Using Self Organizing Map
  3. Pitching Analysis of Body Variables According to Ball Velocity in Amateur Baseball Pitchers Using Gyro Sensor.

    Jae Ho Yu, Ji Heon Hong, Jin Seop Kim, Dong Yeop Lee, Jeong Woo Jeon

    Paper ID IA-ICMBPSMANI-28037-3290 · Pages 11-13

    Abstract

    In baseball, pitching with maximum ball velocity is an important factor for a pitcher's success. Some studies have used the inertial sensors in a manner to compensate for these limitations of the motion capture system for obtaining kinematic data. For this reason, inertial sensors (gyro sensor) were also used in this study to analyze body variables during pitching performance. Thus, the purpose of this study was to examine the correlation of ball velocity with body variables in eight amateur baseball pitchers. In this study, they performed 10 to 15 maximal fastball pitch trials. Pitching velocity was measured by speed gun. The wearable gyro sensor was used to investigate the body variables (horizontal abduction and abduction of shoulder, trunk rotation angle (anterior and posterior), trunk rotation angular velocity, food direction, stride length) during the pitching performance. The mean and standard deviation data from the eight amateur pitchers was used for data analysis. We calculated a Pearson correlation coefficient to determine the associations between ball velocity and body variables. According to result, ball velocity significantly correlated with the horizontal abduction and abduction of shoulder at arm cocking, torso angular velocity and stride length (p

    Download PDF: Pitching Analysis of Body Variables According to Ball Velocity in Amateur Baseball Pitchers Using Gyro Sensor.
  4. Math Model of Grain Size Distribution Versus Radon Content of Wadi Arar, Kingdom of Saudi Arabia

    Mohammed A. M. Alghamdi

    Paper ID IA-ICRAETMANI-28037-3337 · Pages 14-17

    Abstract

    Comparing to other fractions, Coarse and fine sand is highly correlated with radon content with correlation coefficients of - 0.79 and 0.80 respectively. A polynomial of 3rd degree is the best math model representing the relation between the grain size content and it is correlated with radon content. At Coefficient of Determination, R2 equal to 82%, the relation between grain size of coarse and fine sand and radon contents is fitted with polynomials of 3rd degree. Radon content can be deduced depending on the grain size distribution instead of direct measurement using the polynomial model that created. At the radon point of view and for safety purpose, gravel, coarse and medium sand and silt and clay are the best material for construction because of the negative or very weak correlation between them. Keywords- grain size distribution, CR-39, Radon, soil classification, polynomial.

    Download PDF: Math Model of Grain Size Distribution Versus Radon Content of Wadi Arar, Kingdom of Saudi Arabia