62ND IASTEM INTERNATIONAL CONFERENCE
Bangkok, Thailand 05-07-2017
14 papers
-
Stream Flow Simulation for Ayeyarwaddy Basin
Minn Ko Ko Kyaw, Nilar Aye
Paper ID IA-ICCAEBNGK-05077-4019 · Pages 1-6
Download PDF: Stream Flow Simulation for Ayeyarwaddy BasinAbstract
This paper presents stream flow simulation for Ayeyarwaddy basin and rainfall-runoff model which has been widely used to formulate a reliable relationship between the precipitation (input of the model) and runoff (output of the model). In the rainfall-runoff model, terrains processing of watershed delineation and basin characteristics (basin slope, longest flow length, etc.) of Ayeyarwaddy basin are processed in HEC-GeoHMS which is extension to ArcGIS. Curve number grid map for study area is developed by using soil map, land use map (2014), CN lookup table and filled DEM in utility tool of HEC-Geo HMS. Transformed and loss methods are defined by SCS-CN method. Base flow is estimated by Recession model and channel routing which is calculated by Muskingum method. The daily rainfall for fifteen years record, base-flow data, land use data and soil data are used to simulate runoff and calibration process in HEC-HMS model. Peak discharge and volume of the values in model are 124193.6 m3/sec and 3761.34 mm in respectively which are simulated results in Pyay (outlet). The calibration process in Pyay (outlet), the difference in volume percent is 28% and that of peak flow is 15.81%. After simulating the hydrological model, streamflow rate for Ayeyarwaddy basin is obtained. Keywords - Channel Routing, HEC-GeoHMS, HEC-HMS, Recession Model, SCS-CN, Stream Flow.
-
Evaluation of Price Elasticity for Domestic Water Demand using Willingness to Pay: Case Study - Mandalay
Tin Nwe Nwe Htun, Nilar Aye
Paper ID IA-ICCAEBNGK-05077-4024 · Pages 7-12
Download PDF: Evaluation of Price Elasticity for Domestic Water Demand using Willingness to Pay: Case Study - MandalayAbstract
This paper intends to find the price elasticity of domestic water demand for Mandalay using willingness to pay. The study was conducted to 286 sampled households in Mandalay using questionnaire survey. Contingent valuation method is used in questionnaire survey and the value elicitation method is used as a closed ended format questionnaire and open ended follow up questionnaire. The average monthly household's consumption of domestic water was also estimated for the sampled households. Demand curve is constructed by using willingness to pay values versus average monthly water consumption of households. The price elasticity of demand is determined by using arc elasticity method. In this method, value of price elasticity is estimated by mid-point formula. In segment 5, the unit elasticity 1.11 is found and the price values are the upper price 233 MMK/m3 and the lower price 195MMK/m3. Factors affecting to the willingness to pay was analysed by using Linear Regression Model. The mean willingness to pay value is 252 MMK/m3 from linear regression analysis. All the values of price are well above the current water tariff 85 MMK/m3. Keywords - Price elasticity, willingness to pay, arc elasticity method, linear regression, contingent valuation method, elicitation method and domestic water demand.
-
Properties of Alternative Concrete Mixed with Non-Metallic Powder from Recycled Printed Circuit Boards
Pongsatorn Saengpaeng, Premrudee Kanchanapiya, Chakrapan Tuakta
Paper ID IA-ICCAEBNGK-05077-4444 · Pages 13-17
Download PDF: Properties of Alternative Concrete Mixed with Non-Metallic Powder from Recycled Printed Circuit BoardsAbstract
The objective of this study is to investigate the effects of using non-metallic power (NMP) as an alternative constituent on properties of concrete. The NMP was obtained during a recycling process of printed circuit board waste in a recycling plant in Thailand. Coarse-grained NMP was mixed in concrete mixture as fine aggregate (sand) replacement ranging from 0 to 50% by weight with specified water/cement ratio of 0.62. Compressive, splitting tensile, and slump tests were conducted in accordance with corresponding ASTM Standards. Test results have shown that both compressive and splitting tensile strengths gradually decreased as percentage of replacement increased. The slump of freshly mixed concrete with NMP was highest at 8 cm for 10 and 20% NMP replacements, while marked reduction was observed for concrete mixes with higher NMP replacements. On the other hand, concrete with 50% NMP replacement had lowest bulk density of 2,216 kg/m3 as expected. Considering strengths and workability attained from different mixes, this preliminary study has suggested that use of NMP in concrete is limited to no more than 20% replacement. With further development, the resulting concrete can be sustainable in a wide range of building applications, offering an alternative way for electronic waste management. Index Terms - Concrete, Compressive strength, Non-metallic Powder, Recycled printed circuit boards
-
Managing Design Process and its effect on Construction Projects
Mamoon Mousa Atout
Paper ID IA-ICCAECAMB-19057-3869 · Pages 18-22
Download PDF: Managing Design Process and its effect on Construction ProjectsAbstract
Development projects in middle east present special conditions in which the designers/ consultant of projects must focus on each design stage from conceptual design to tendering stage to deliver all design phases without any delay. International consultancy firms whose there staff are multinational and had the opportunity to work in the region, the advanced new architectural and structural software, the squeezed time of project completion by the client, and the fast growth of project development ( new cities) and infrastructure development are some factors that contributed to the delay of project completion where designers of consultancy firms don’t have the sufficient capability to manage and control the design process. This study determines the factors that contribute to project delays caused by consultancy firms who don’t manage and control design process based on the clear understanding the project objectives.Findings and recommendations of this research is recorded based on specific questionnaires designed for design engineers, resident engineers and architects who works with consultancy firms and based on interviews with some of project managers from client and contractor side to find out the effect of consultant adoption to the implications of managing the design procedures for any project and actions should be considered and taken by design managers and the rest of his team to complete the design on time without any discrepancies in design drawings and tender documents of the construction project. Keywords - Process of design, Engineers Obligations, Design Management, Project Objectives, Architect and Engineer
-
Jordanian Small and Medium Enterprises (SMEs) Barriers to Enter into Foreign Markets
Sultan 'Mohammadsaid' Sultan Freihat
Paper ID IA-ICEBMBNGK-05077-01 · Pages 23-26
Download PDF: Jordanian Small and Medium Enterprises (SMEs) Barriers to Enter into Foreign MarketsAbstract
The study identified the key barriers that confront Jordanian SMEs to inter into foreign markets. A field study was conducted to collect data from a sample of (60) SMEs foreign trade units, represent Jordanian SMEs, engaged in exporting into foreign markets, or strive to enter into those markets. The most important findings were: language difference between home and host country, difference in social approaches between home and host country, insufficient R&D investments, legal procedural complexity in the home country, lack of express service within the home economy, corruption in the home economy have a significant effect on Jordanian SMEs entry into foreign markets. At individual institutional barrier level, the difference in social approaches is the most important barrier for Jordanian SMEs, followed by legal procedural complexity. The findings of the paper correspond with previous research findings on legal procedural complexity in the home country, differences in social approach between participating firms also increase complexity in the exporting process and hence, affect entry into foreign markets, language barriers indicate lower language ability of home firm communication flow with its foreign parallel one. Lack of express service within the home economy, corruption, R&D investments are also work as constraints to SMEs entry into foreign markets. Researcher presented a set of recommendations, the most important ones were: Investing and supporting Jordanian SMEs more actively is the most realistic strategy as the country, as many other emerging countries, suffer from an inadequate supply of capital to support growth of larger industries. Jordanian SMEs owners and managers needed to be responsive about the different entry modes available to firms in the context of the operating environment. The policymakers along with other stakeholders should address and support Jordanian SMEs to overcome those barriers, and facilitate a smooth internationalization process to ensure the expected pace of national development. The identification of barriers that confront Jordanian SMEs to enter into a foreign market is important, since they, like most other SMEs in an emerging economy, cannot undertake independent research considering resource limitation, therefore, Jordanian government along with other formal authorities should undertake and finance this independent research. Keywords - Market entry, SMEs, barriers, Emerging economy.
-
Why Managers Lose Balance; Can Technology Influence Balance?
Solomon Ozemoyah Ugheoke
Paper ID IA-ICEBMBNGK-05077-4156 · Pages 27-31
Download PDF: Why Managers Lose Balance; Can Technology Influence Balance?Abstract
With the work environment becoming more complex and diverse, creative methods and approaches have emerged to deal with issues that were non-existent in the past. With the advancements of technology and multiple generations co-existing with different behavioral norms, a shift from traditional approach to Work–Life balance integration has become a big issue in HRM. Employees have been on the toes of the employers for justice and on the other hand employers have been keen to minimize the cost and effect of the same. Since work life balance pose a heavy cost to the organization in terms of time and cost. Even though the employment laws now permits family friendly programs, workplace implementation still remain a big challenge. Investing in what may work out well for the organization is also unavoidable. It is time for HRM to convince management to embrace work family programs to enable employees to attend to their family issues. As such, HRM has to provide developmental assistance to meet work development. This study is designed to explore how technology is shifting the relationship between work and life spheres and work outcome. Data were collected from 265 managers. The study demonstrated that advancements in technology will always affect how managers can manage both work and life domains. Findings from this study have significant implications for managers and the increasingly diverse workforce. Keyword - Work life balance, information technology, firm performance.
-
Application of Value Stream Mapping for Responding Customer Order Time Reduction in a Precast Concrete Production Business
Phitphisut Thitart, Sakgasem Ramingwong
Paper ID IA-ICEBMBNGK-05077-4333 · Pages 32-35
Download PDF: Application of Value Stream Mapping for Responding Customer Order Time Reduction in a Precast Concrete Production BusinessAbstract
Constantly changing technology and fierce competition force companies to ensure those customers’ demands can be satisfied at the right time at the lowest cost. With an increasing focus on Industry 4.0, it is becoming more important to streamline communication using Internet of Services to allow greater interaction between vendors and their customers. This study uses a concrete factory in Northern Thailand as a case study. The company had long order cycle time, leading to the proposition of applying the Value Stream Mapping (VSM) in logistics operation to the company. The investigation found that the main sources of non-value activity are in the following activities: receiving orders, checking stock, and managing transport schedules. ECRS analysis showed that using a web-based application to make real-time information flow would reduce order cycle time and increase customer satisfaction. The study will be extended further to design a web-based application for reducing order cycle time in the company. Index Terms—Efficiency Improvement, Value Stream Mapping, Order Cycle Time, Concrete Factory.
-
A Relationship Study of Price Promotion, Customer Quality Evaluation, Customer Satisfaction and Repurchase Intention: A Case Study of Starbucks in Thailand
Qintao Zhang, Kriengsin Prasongsukarn
Paper ID IA-ICEBMBNGK-05077-4393 · Pages 36-39
Download PDF: A Relationship Study of Price Promotion, Customer Quality Evaluation, Customer Satisfaction and Repurchase Intention: A Case Study of Starbucks in ThailandAbstract
The purpose of this research is to investigate the relationship among price promotions, beverage and food quality, service quality, customer’s satisfaction and repurchase intention in Starbucks (Thailand).A questionnaire was conducted to collect data from the respondents who visited Starbucks in Thailand. Correlation was applied to analyze the relationships among variables. The results suggested that price promotion in Starbucks has a positive relationship on customer evaluation on food and beverage quality and service quality, and a strongly positive relationship between customer satisfactions and repurchase intention. The findings encourage coffee shop management to utilize strategic price promotions to improve customer evaluation and satisfaction, which further contribute to customer loyalty. Keywords - Price promotion, customer evaluation, customer satisfaction, repurchase intention
-
Development, Fabrication and Automation of an Agricultural Implement meant for Cultivation
C Adithya Reddy, S A Mohan Krishna, Cariappa A S, Akhil K B, Sahil S Patel
Paper ID IA-ICMAEBNGK-05077-4294 · Pages 40-44
Download PDF: Development, Fabrication and Automation of an Agricultural Implement meant for CultivationAbstract
The labour dependency in an agriculture driven country like India is one of the major problem affecting the rate of production. This paper details the methodology and principles involved in development of an automation kit which can be mounted on any tiller for its autonomous functioning. The automation kit is developed with the efficient application of mechatronics and kinematics. A two mode system is provided namely semi automatic and automatic mode for different field conditions. The automation of a power tiller thus eliminates the arduous task of one walking behind it in the slushy areas. Index terms - Agriculture, Production, Automation, Mechatronics, Kinematics, Power tiller.
-
Need to change the Vantage Point towards Laboratory Animals and Adopt Recreation as 6th R
Himanshu Joshi, Bhavin Kansara
Paper ID IA-ICMBPSTHAI-05077-3706 · Pages 45-47
Download PDF: Need to change the Vantage Point towards Laboratory Animals and Adopt Recreation as 6th RAbstract
Background: The concept of three R’s (Reduction, Refinement and Replacement) was introduced by William Russell and Rex Burch in 1959 in their book ‘The Principles of Humane Experimental Technique’. This was followed by the addition of two more R’s i.e. Rehabilitation and REUSE. Objective: The objective is to understand the need to change our vantage point towards laboratory animal care and propose ‘RECREATION’ as yet another “R†to animal welfare. Recreation means the activities animals do for pleasure or enjoyment which is essential for physiological and psychological well being especially for animals in captivity. Method: Recreation aids selected on the basis of preference tests done on rodents giving them the choices on what they prefer or need. Cage preference by mice was recorded by regular observation. Results: The animal’s preferred enriched compartment (67.35±9.15 %) to the un-enriched one (32.64±9.14 %). The influence of enrichment on food intake shows the mice housed in enriched (EE) caging consumed less feed (during day 5 to day 10) when compared to the animal housed in un-enriched (UE) caging. Conclusion: Recreation addresses all the issues ranging from animal welfare to research outcome by improving the physical and mental health of the laboratory animal, so adoption of "Recreation" as 6th "R" is not a choice rather a need. Housing conditions play a pivotal role in determining the experimental outcome as only a physically and mentally fit animal can provide reliable data and improve the quality of research. Recreation activities in terms of environmental enrichment using enrichment devices have taken a place, in animal research in recent years. Indian animal facilities too need to adopt such useful practice of enrichment as a standard for taking the quality of research a step further. Keywords - 3R’s, reduction, refinement, replacement, rehabilitation, reuse, recreation
-
Antigenotoxic Potential of Tanacetum Parthenium Leaf Extract and Synthetic Compound Parthenolide against Radiation Induced Micronuclei Formation and Oxidative Stress in Swiss Albino Mice
Pooja S, Prashanthshetty, Suchetha Kumari.N, Jayaram Shetty K
Paper ID IA-ICMBPSTHAI-05077-3775 · Pages 48-51
Download PDF: Antigenotoxic Potential of Tanacetum Parthenium Leaf Extract and Synthetic Compound Parthenolide against Radiation Induced Micronuclei Formation and Oxidative Stress in Swiss Albino MiceAbstract
Background: Radiotherapy is frequently used as a part of cancer treatment to achieve tumor control. However, treatment has been widely used as an effective tool to kill tumor cells; it might produce harmful effects to surrounding healthy tissues. Radiations induce oxidative stress on target tissues, mainly through the generation of reactive oxygen species (ROS) resulting in imbalance of the pro and antioxidants in the cells, in DNA, lipids, and proteins, eventually inducing cell death. Literature review reveals that Tanacetum species have been used as remedies in traditional medicine since ancient times throughout the world. Objective: To evaluate the antigenotoxic potential of Aqueous and Ethanolic extracts of Tanacetum parthenium (Linn.) and synthetic compound Parthenolide against Electron beam radiation (EBR) induced micronuclei formation and oxidative stress in Swiss Albino mice. Methodology: Radiation induced micronuclei was performed in the bone marrow of mice according to the method of Hosseinimehret al., 2003. The oxidative stress was carried out to estimate Lipid peroxidation markers (MDA) in the liver homogenate of the mice according to the method of Subash et al., 2011. The experimental animals were orally administered with 100mg/kg b.wt. ethanolic and aqueous extracts of Tanacetum parthenium and 4mg/kg b.wt. Synthetic compound parthenolide once daily for 15 days before exposure to sub-lethal dose (6Gy) of Electron Beam Radiation. Control (C), Radiation Control (RC) and drug control (DC) group was maintained. Results: The number of Micronucleated Polychromatic Erythrocytes (MnPCE) and Micronucleated Normochromatic Erythrocytes (MnNCE) were decreased in pre treatment groups when compared to radiation control group. Pre treatment was able to reduce Malondialdehyde (MDA) level when compared to radiation control group. Conclusion: Present findings reveal the antigenotoxic potential of micronuclei formation and reduced lipid peroxidation which may be attributed to scavenging of radiation induced free radicals. Keywords - Tanacetum parthenium, Electron Beam Radiation, Swiss albino mice, Malondialdehyde and Micronucleus
-
Tribal Religion of Lower Assam of North East India
Hemanta Kumar Kalita, Bhanu Bezbora Kalita
Paper ID IA-ICSSHBNGK-05077-3994 · Pages 52-57
Download PDF: Tribal Religion of Lower Assam of North East IndiaAbstract
Religion is very sensitive issue and naturally concerned with the sentiment. It is a matter of faith and made neither through logical explanation nor scientific verification. That Religion from its original point of view was emerged as the basic needs and tools of livelihood. Hence it was the creation of human being feeling wonderful happenings bosom of nature at the early stage of origin of religion. It is not exaggeration that tribal people are the primitive bearer of religious belief. However religion for them was not academically explored rather it was regarded as the matter of reverence and submission. If we regard religion from the original point of view the religion then is not discussed under the caprice of ill design.. To think about God, usually provides no scientific value as it is not a matter of verification and material pleasant. Although to think about God or pray to God is also not worthless. Pessimistic and atheistic ideology though not harmful to human society yet the reverence and faith towards God also minimize the inter religious hazards and conflict. It may help to strengthen spirituality and communicability with others. Spiritualism renders a social responsibility in true sense which helps to understand others from inner order of heart. We attempt to discuss some tribal religious festivals along with its special characteristics. Tribal religion though apart from the general characteristic feature it ushers natural gesture and caries tolerance among them. Index Terms - Bah, Baikhow, Baikhokshi, Bastu, Bhut-pret, Bihu, Bixohari, Bura Dangoria Deodhani, Deory, Devta/DeviGoxai Kairatraj, Kamakhya, Katigasa- Kherai, Koutaki Laksmi Rici, Rishi, Samkhya, Santhal, Shakti, Shitzu, Siva, Thourai Birai, Thourai Bari, Tista Buri.
-
Removal of Manganese and Arsenic from Groundwater using Manganese Oxide Coated Sand
Md. Ehosan Habib, Muhammad Ashraf Ali, Kazi Parvez Fattah
Paper ID IA-ICSTMBNGK-05077-4055 · Pages 58-62
Download PDF: Removal of Manganese and Arsenic from Groundwater using Manganese Oxide Coated SandAbstract
Manganese (Mn) and arsenic (As) are common natural groundwater contaminantsin Bangladesh and many other countries. WHO (2004) recommendedhealth-based drinking water guideline values of0.4 mg/l and 0.01 mg/l for Mn and As, respectively. Removal of dissolved Mnby filtration through granular media (sand) could be an effective treatment method forMn removal from drinking water. This research work was focused evaluation of the effectiveness of different Mn-oxide coated media (synthetic media, prepared media, green sand) in removing Mn and As from water. Laboratory investigations have been carried out to assess removal of Mn and As in three different types of Mn-oxide coated media: (a) “prepared†Mn-oxide coated filter media (prepared by passing Mn-bearing water through filter columns made up of “Sylhet†sand), (b) “synthetic†Mn-oxide coated media (prepared by treating “Sylhet†sand with MnNO¬3, H2O2and NaOH), and(c) commercially available Mn-bearing “green sandâ€. The average Mncontentof the “prepared†filter media was about 7,550 mg/kg; average Mn contents of “synthetic†media and “greensandâ€were 25,250 mg/l and 14,400 mg/kg, respectively. The three types of Mn-oxide coated filter media have been found to be very effective in removing dissolved Mn from groundwater over a wide range of initial Mn concentration and pH.Results of both column and batch experiments showed that Mn removal efficiency increases with increasing Mn-content of the filter media. Mn removal efficiency also increases with increasing Mn in the influent water and increasing pH (in column experiments). Synthetic Mn-coated media, with the highest Mn content among the 3 media, performed best in removing Mn at higher flow rates. However, the other media (“prepared†media and greensand) also performed wellat slower flow rates. A contact time of about 1.5 minutes was found to be sufficient for almost complete removal of Mn under the experimental conditions employed in this study. Removal of Arsenic [As(III)] in Mn-oxide coated filter media has been found to be strongly dependent on pH and phosphate concentration. Removal of As decreased with increasing pH, especially at pH beyond 7.5.
-
Statistical Optimisation of Defluoridation using Calcium Impregnated Activated Sludge as an Adsorbent: Batch Study and Mathematical Modeling
Swapnila Roy, Papita Das
Paper ID IA-ICSTMTHAI-05077-3174 · Pages 63-65
Download PDF: Statistical Optimisation of Defluoridation using Calcium Impregnated Activated Sludge as an Adsorbent: Batch Study and Mathematical ModelingAbstract
In this investigation, the de-fluoridation in water was investigated by using calcium impregnated activated sludge .Here activated sludge was the precursor for the preparation calcium impregnated activated sludge. The effect of chemically modified Ca-Activated Sludge(Ca-AS) as an adsorbent was carried out in de-fluoridation study. The different process parameters such as dose of adsorbent, contact time, temperature are optimized by applying two level three factor(23) CCD(Central Composite Design) with the help of Design Expert Software in Response Surface Methodology(RSM).Three important process parameters : adsorbent dose (1.0-2.0 g L-1) temperature (35-60 0C ), and contact time(40 -120 min) were selected as the independent variables, while the fluoride adsorption capacities were specified as dependent variables. The higher correlation coefficient(R2) 0.9762 implies the fitness to the response surface quadratic model.The optimum condition for fluoride adsorption onto Ca-AS was experimented and it was observed respectively 1.0 gL-1, 120 minutes and 600C.In this optimized condition the removal efficiency is achieved as 99.31%. Keywords - Fluoride; Adsorption; Calcium impregnated activated sludge; Response surface methodology; Desirability function