9TH IASTEM INTERNATIONAL CONFERENCE
Bali, Indonesia 09-01-2016
ISBN 978-81-925751-9-3
12 papers
-
Seismic Design And Evaluation Of Buckling-Restrained Knee-Braced Frame With Single Plate Shear Connections
Piseth Doung, Sutat Leelataviwat
Paper ID IA-ICCAEBALI-09016-101 · Pages 1-6
Download PDF: Seismic Design And Evaluation Of Buckling-Restrained Knee-Braced Frame With Single Plate Shear ConnectionsAbstract
The design and evaluation of Buckling-Restrained Knee-Braced Frame(BRKBF) with Single Plate Shear Connections (SPSCs)are presented in this study. The objective of this research is to apply a design methodology called Performance Based-Plastic Design (PBPD) to design BRKBF system and to estimate the collapse probability of the framing system under earthquake excitations. The PBPD approach utilizes yield mechanism and pre-selected target drift as the main design parameters to control structural deformation.This method was applied to the design of an example BRKBF structure. The collapse probability of the example BRKBF was then investigated under 44 different ground motions based on FEMA P695 framework. Performance assessmentresults based on nonlinear static and time history analyses are presented and discussed. Keywords— Seismic Design, Seismic Evaluation, BRKBF, Single Plate Shear Connections, PBPD, FEMA P695
-
Bending Analysis Of Thick Laminated Plates By A Boundary Element Method
Tikumporn Nissaipun, Boonme Chinnaboon
Paper ID IA-ICCAEBALI-09016-704 · Pages 7-12
Download PDF: Bending Analysis Of Thick Laminated Plates By A Boundary Element MethodAbstract
In this paper, a Boundary Element Method (BEM) is developed for analysis of moderately thick laminated plates modeled by Mindlin’s theory. Laminated plates are composed of orthotropic layers where shear deformation is considered. The governing equations are three coupled linear partial differential equations of second order with three physical conditions along the plate boundary. The present method is achieved using the concept of the analog equation method (AEM). According to this principle, the original governing equations are replaced by three uncouple Poisson’s equations with fictitious sources under the same boundary conditions. The fictitious sources are established using a technique based on the BEM and approximated by radial basis functions series. The present method has the advantages of the BEM in a sense that the discretization and integration are performed only on the boundary. To validate the effectiveness, accuracy as well as the applicability of the proposed method, numerical results of plate problems are presented. Keywords— Thick plates, Mindlin plates, Laminated Plates, Boundary Element Method, Analog Equation method.
-
Analysis And Design System For Eeg Based On Decision Support System (DSS) Higher Education Research And Industry (RAPID)
Boy Sabarguna, Ajeng Pramastuty, Muhammad Sukarno
Paper ID IA-ICMBPSBALI-10016-100 · Pages 13-16
Download PDF: Analysis And Design System For Eeg Based On Decision Support System (DSS) Higher Education Research And Industry (RAPID)Abstract
Classification of EEG wave signal into diagnose the disease is still rarely investigated. This approach tried to do research on "Analysis and Design EEG System Based On Decision Support System (DSS)" trying match the pattern of the waves on the EEG diagnostic data archival applications with common signs and symptoms. This paper attempts to explain the signal pattern recognition techniques EEG (electroencephalograph), reported signs and symptoms use the Decision Support System (Decision Support System). Decision Support System (DSS) on the introduction of the EEG signal is to distinguish between patients with normal and pathological (abnormal), and then differentiate into 15 classification pathology of the disease. The use of engineering Decision Support System (DSS) in the EEG signal analysis because of, the lack of availability of neurologists to analyze EEG signals, especially in remote areas. It would be very beneficial, especially in where for analyzing EEG signals difficult to be done directly by a specialist Neurology. Therefore, diagnosis may be assisted by a Decision Support System (DSS). Keywords— Decision Support System (DSS), EEG, Waveform.
-
Electroencephalogram Analysis With Wavelet Transform And Neural Network As A Tool For Acute Ischemic Stroke Identification
Osmalina N.rahma, Sastra K. Wijaya, Prawito, Cholid badri
Paper ID IA-ICMBPSBALI-10016-697 · Pages 17-22
Download PDF: Electroencephalogram Analysis With Wavelet Transform And Neural Network As A Tool For Acute Ischemic Stroke IdentificationAbstract
The prevalence of stroke in Indonesia are 7% based on the health proffesionals statement and 12.1% based on patients' symptoms' history. Early examination using CT scan causes radiation effects and spent high operational cost whilethe prevalence of stroke based on diagnosis or symptoms were higher in the lowest (13.1 ‰) and mid lower (12.6 ‰) quintile of ownership index. This studytried to analyze the signals of EEG automatically based ontraining data sets from normal patients and patients with acute ischemic stroke (AIS) using digital signal processing such as wavelet transform and feedforward type of neural network with Extreme Learning Machine (ELM) algorithm. It was claimed that electroencephalography could help to confirm or detect acute ischemic strokewhich is shown by the presence of the slow wave and the asymmetrical wave of right and left hemisphere. This study uses Delta Alpha Ratio (DAR), Delta Theta Alpha Ratio (DTABR) and Brain Symmetry Index (BSI)'s value as the ELM input feature score which were obtained by Wavelet (Daubechies 4) transformation and Welch's method to identify acute ischemic stroke. In this study, the performance of systemtest accuracy, sensitivity and specificity were above 93%. Keywords— Electroenchepalogram (EEG), Acute Ischemic Stroke, Wavelet Transform, Extreme Learning Machine (ELM).
-
The Probability Prediction Of Fault State Using Case-Based Reasoning With Random Forest
Bong-Geun Song, Seung Hwan Park, Cheong-Sool Park, Jun-Geol Baek
Paper ID IA-ICRAETBALI-09016-102 · Pages 23-26
Download PDF: The Probability Prediction Of Fault State Using Case-Based Reasoning With Random ForestAbstract
Semiconductor process is that have spent a lot of economic and time costs when an abnormality occurs. It is essential to manage the efficient process monitoring about the abnormality diagnosis of the equipment. Since the vacuum pump are used in a number of steps, it is possible to diagnose the overall condition of the process through the health monitoring via vacuum pump. In this paper, we performed an analysis using the case information to be generated in response to the aging of equipment in case based reasoning (CBM). In order to optimize the case which is defined as Initial state, Aging state, Fault state defined, we determine the two experimental conditions and analysis using a machine learning technique. In analysis, we used the Random Forest that there is strength in multiple and imbalance class. Based on the optimal case that selected as the experimental results, we can provide decision to assist with the diagnosis and prediction of equipment. Keywords— Vacuum pump, Random Forest, case-based reasoning, Initial state, Aging state, Fault state.
-
Improved Feature Extraction Using Box Filter Combination In Image Data
Jae Yeol Hong, Seung Hwan Park, Jun-Geol Baek
Paper ID IA-ICRAETBALI-09016-103 · Pages 27-30
Download PDF: Improved Feature Extraction Using Box Filter Combination In Image DataAbstract
A feature of the image is the point that can represent better the characteristic of the image other than points. Therefore, a feature of the image data must be detected regardless of the change of scale, rotate and viewpoint, etc. For feature extraction of existing research, feature point is extracted compare to normal image and abnormal image, otherwise method has been developed to extract edge points. In particular, SIFT(Scale Invariant Feature Transform) applies the filter and uses DoG(Difference of Gaussian)to extract the edge points. In this case, Gaussian filter is used. The reason is known that the best filter to extract the feature of image is Gaussian filter. However, Gaussian filter blur objects in image. So, using Gaussian filter prevents to extraction exact feature point. Therefore, the purpose of this study is to solve the problem by developing a filter with linear combination of box filters. The proposed filter extracts feature that located the boundary between the object in image more sensitive. In addition, through experiments,the proposed filter is confirmed to be better than Gaussian filter in specific image. Keywords— Gaussian filter,box filter, SIFT,Combination of box filters.
-
Surf Based Fault Image Detection For Printed Circuit Board Inspection
Eun-Hye Yuk, Seongwon Jang, Seunghwan Park, Cheong-Sool Park, Jun-Geolbaek
Paper ID IA-ICRAETBALI-09016-710 · Pages 31-35
Download PDF: Surf Based Fault Image Detection For Printed Circuit Board InspectionAbstract
It is possible to collect, manage and analyze large amounts of data in real time because of development of fusion technology and spread of Internet of Things(IoT) in modern society. With the advanced technology, the high-tech product manufacturers began to offer differentiated services by producing fewer customized products. According to this, PCB (Printed Circuit Board, PCB), key component of the digital products, is also produced in small quantity batch production. Current PCB inspection systems require information about the normal image because it detects faults by comparison with the non-defective image. Therefore, this means that the test is not possible without the normal image and needs to have the all reference image. It is a major cause of reducing the efficiency of the PCB inspection system. This paper proposes a method for detecting the fault in PCB without normal image by learning the pattern of abnormal image. As a result of this methodology, it is expected to check more effectively the defects in the system to produce a variety of products and bring the time and cost savings in PCB inspection. Keywords— PCB Inspection, Speeded Up Robust Feature, Random Forest, Kernel Density Estimation.
-
Expectations And Realities: A Qualitative Snapshot Of Wellness And Work Life Balance Within A Commercial Law Career
Alexandra Johnstone, Barry Yau
Paper ID IA-ICSSHBALI-10016-002 · Pages 36
Download PDF: Expectations And Realities: A Qualitative Snapshot Of Wellness And Work Life Balance Within A Commercial Law CareerAbstract
With a sample size of approximately 50 qualitative participants, this research project delves into many themes relating to the experiences studying commercial law, the place and role of ethics within the study and practice of commercial law, and expectations and realities of wellness and work life balance within the practice of commercial law. This study examines in detail the expectations of law students in two categories- law students who are still studying their law degree and law students who have commenced their practical legal training course as one of the final requirements before admission as a lawyer. Student’s expectations as to whether they can achieve work life balance and wellness within a career as a commercial lawyer are examined in detail, as well as how those expectations are formed and influence career choices. This qualitative research project also examines early career commercial lawyers reflections on and attitude towards not only the study and practice of law, but also as to how well wellness and work life balance have been achieved and further expectations as to achieving wellness and work life balance within a commercial law career. The research project also considers early career commercial lawyers’ reflections of their study and attitudes towards commercial law study and any correlating effect on influencing career choice and current attitudes. Our preliminary results from our ongoing research study showed a strong influence and under current theme of work life balance and wellness as to career choice and predicted career choice amongst the research participants. This drove a need for the research to focus further and examine in greater detail the strong narratives of work life balance and wellness motives as driving influences and expectations as they relate to a career as a corporate commercial lawyer. Keywords— Wellness Work Life Balance Law Career Qualitative Study,
-
Risk management of ILC – SLC in pt. Semen indonesia (PERSERO), Tbk. Tuban plant iii
Adisty D. Nurdiana, Ali musyafa
Paper ID IA-ICSTMBALI-09016-738 · Pages 37-41
Download PDF: Risk management of ILC – SLC in pt. Semen indonesia (PERSERO), Tbk. Tuban plant iiiAbstract
In-Line-Calciner (ILC) and Separate-Line-Calciner (SLC) are the equipments of pre-calcinations process in mostly modern industrial cement kilns that have importance due to its impacts for fuel consumption, pollutant emission and final cement quality. Any failures in this system will lead to stop the clinker production process and increase losses of the company since 60% calcinations process has done outside the rotary kiln. Therefore risk management needs to be done in this system. In this paper, HAZOP method has been used to determine hazard identification and analysis with two nodes that are ILC and SLC with each has five parameters to measured and controlled that are Preheater Exit %O2, Preheater Exit %CO, Preheater Exit Gas Temperature, Stage IV Calciner Exit Material Temperature, and Preheater Exit Pressure Difference. Guide word and deviation determination based on control chart constructed from operational data of each components of measurement points. Likelihood estimation based on data operational failure that taken along 180 days while consequence estimated based criteria as well as the data posed by control chart. Risk criterion of measurement points in each node produced by multiplying likelihood and consequence. Based on the analysis known that any hazards or failures occur in the component of measurement points in each nodes have potential causing main risks as operational clinker production process has to stop and inappropriate product quality standard mainly because of incomplete preheating and combustion process. To reduce the risk in the system, routine preventive maintenance and calibration should be done especially in Preheater Exit Pressure Difference measurement point components that have an extreme level of risk and indicates any potential hazards that causing operation process to stop. Keywords— ILC, SLC, Risk Management, HAZOP, hazards identification.
-
Trust in Relationship Marketing
Beverly Leeds
Paper ID IA-ICEBMINDO-10016-002 · Pages 54-59
Download PDF: Trust in Relationship MarketingAbstract
The importance of trust in relationship marketing arrangements has been noted by many authors suggesting that the successful management of e-learners requires trust and new forms of supervision. It means trusting and empowering the learner to complete the work when and where it suits them best. However, there has been very little discussion regarding the nature and condition of trust in e-learn. This paper examines the nature of trust from a number of theoretical bases, including economics, sociology, philosophy, and psychology, with reference to relationship marketing relationship between a tutor and e-learner within relationship marketing organisations. It is concerned with the nature and conditions of trust rather than an examination of the importance of trust or how trust can be created. As well as examining the bases of trust the paper also examines different levels of trust that can support a relationship marketing relationship. Drawing a distinction between individual and organisational levels of trust and between the conscious and unconscious states of trust, it concludes with a conceptual model. The model provides a framework to explain some of the anomalies and confusion in the debate regarding the nature of trust in relationship marketing arrangements and illustrates both the level of trust and the condition of trust that can exist in a relationship marketing relationship. Keywords- Relationship marketing, , Trust
-
Optimization Of Injection Moulding Process Parameters For Recycled High Density Polyethylene (RHDPE) Using The Taguchi Method
Jamaluddin Abdullah, Liau Wai Shan, Hanafi Ismail
Paper ID IA-ICRAETBALI-09016-762 · Pages 60-65
Download PDF: Optimization Of Injection Moulding Process Parameters For Recycled High Density Polyethylene (RHDPE) Using The Taguchi MethodAbstract
In this work, recycled High Density Polyethylene (rHDPE) from the industry disposal is investigated as potential recycled plastic to substitute its virgin source for the injection moulding process. In particular, the study aims to determine the optimum process parameters for the rHDPE in the application of injection moulding process. Taguchi method is adopted to optimize the process parameter combination from the four controllable process parameters, namely the melting temperature, packing pressure, packing time and injection pressure. The effects of the process parameters are evaluated and benchmarked against the established mechanical properties and dimensional stability of the moulded plastic tray from virgin source. The result of the study reveals that the qualities of the moulded rHDPE plastic tray are good and optimized under the process combination of the melting temperature of 513.15 K, packing pressure of 70%, packing time of 30 s and injection pressure of 15 MPa for the shrinkage; meanwhile the combination of melting temperature of 518.15 K, packing pressure of 85%, packing time of 30 s and injection pressure of 15 MPa for the tensile strength and lastly, the combination of melting temperature of 518.15 K, packing pressure of 80%, packing time of 10 s and injection pressure of 14 MPa for the flexural strength. The feasibility to injection moulded rHDPE and optimize the process parameters shows huge potential of using rHDPE as sustainable alternative to virgin HDPE as the raw material for injection moulding process. Index Terms- Recycled High Density Polyethylene, Taguchi Method, Injection moulding, Mechanical Properties, Shrinkage, Green Manufacturing
-
Nanoparticles Of Abateas Aedes Aegypti Mosquito Larvae Exterminator Using Extraction Ofbrotowali Stem (Tinospora Crispa) Absorbed Bentonit
Wahyu Lestari, Hilma Eka Masitoh, Dra. Cornelia Budimarwanti, M.Si
Paper ID IA-ICSTMBALI-09016-100 · Pages 66-71
Download PDF: Nanoparticles Of Abateas Aedes Aegypti Mosquito Larvae Exterminator Using Extraction Ofbrotowali Stem (Tinospora Crispa) Absorbed BentonitAbstract
Controlling dengue hemorrhagic fever vector would be better when the people could choose own choice of method such as spraying synthetics insecticide, using abate synthetics as synthetics larvacide, using fish as biological controller, and using electrical racket as a mechanical controller. Besides, using poisonous plant as alternative controlling method was being encouraged. Brotowali (Tinospora crispa) is a wild plant from a tropical area, which could not be eaten, easy to grow, cheap, safe and environmental friendly. Using extract of brotowali stem (Tinospora crispa) mixed by bentonit soil to be abate concerned with nature. Lethal concentration CL50 towards larvae is 400 mg/100 ml or 4000 ppm for well water and 300 mg/100 lm or 3000 ppm for PAM water. The particle morphology of sonication methods of abate mosquito in general are mesoporous nanoparticles. Keywords- Brotowalistem, Aydes aygypti, Natural, Larvacide, safe.