Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

131ST IASTEM INTERNATIONAL CONFERENCE, Bali, Indonesia 30-07-2018

← All proceedings

Proceedings cover: 131ST IASTEM INTERNATIONAL CONFERENCE, Bali, Indonesia 30-07-2018

131ST IASTEM INTERNATIONAL CONFERENCE

Bali, Indonesia 30-07-2018

7 papers

  1. Research On The System Construction Of Disaster-Exploration Unmanned Vehicle

    Jia-Horng Yang, Ding-Yu Chen, Bo-Kai Hu, Po-Jen Tu

    Paper ID IA-ICCARVEBLI-30078-9003 · Pages 1-10

    Abstract

    The main purpose of this study is to establish anomnidirectional, stable unmanned vehicle (UV) system that integrates the mecanumwheel and robotic arm based on sensors for disaster exploration. Firstly, according to the task requirements, we set up the sensor module, core control module, motor drive module, remote control module, and robotic arm module. We applied the dynamic information of the vehiclecollected by the sensor mudule to help establish the more accurate math models of the unmanned vehicle and robotic arm system that will facilitate the subsequent designs of the smooth controllers. On the vehicle structure, the feature of the mecanumwheelenables the UVto travel flexibly in a confined space for disaster exploration. Finally, through the interfaces of the remote monitoring and control system, core control moduleeffectively integrated the software and hardware architectures of the UV system that enabled to stably and accurately control the robotic arm to safely and efficientlydispose explosives materials. Therefore, UV could smoothly complete the tasks of the disaster exploration and explosive disposition. Keywords - Disaster exploration, Unmanned vehicle, Robotic arm

    Download PDF: Research On The System Construction Of Disaster-Exploration Unmanned Vehicle
  2. Bank Involvement With Smes In Zimbabwe

    Marx Dambazaa, Jw Krugerb

    Paper ID IA-ICEBMBLI-30078-8712 · Pages 11-15

    Abstract

    The 2012 World Bank Survey in Zimbabwe revealed that 5.7 million people are working in the Small and Medium-sized Enterprise (SME) sector. The SME sector is the country’s economic fulcrum. SMEs find it difficult to access finance. Conventional wisdom argues that banks are the source of SME external funding. A survey of 8 banks on SME funding, was carried out to assess the banks involvement with SMEs. From the survey, banks are keen to move into the SME lending market but are sceptical on how to do it. Most banks concur that SME lending market is profitable. Keywords - Bank Involvement, SME External Funding, SME Lending, SME Sector.

    Download PDF: Bank Involvement With Smes In Zimbabwe
  3. The Success Factors, Barriers And Challenges Faced By Franchisee (Sme’s) Operating A Fast Food Outlet In South Africa

    Mtsweni L, Serumaga-Zake P, Kruger JW

    Paper ID IA-ICEBMBLI-30078-9010 · Pages 16-20

    Abstract

    In South Africa, approximately 440,000 small businesses (SME’s) have closed in the last five years. The number of new business start-ups is at an all-time low and has stagnated over the past decade. Small businesses offer the only real prospect of large-scale job creation in South Africa. This study aimed to success factors, barriers and challenges faced by franchisee (SME’s) operating a fast food outlet in South Africa. This was a desktop study. The success factors of a franchisee were found to be management capacity, system controls and inventory control, skills requirements, site location and accessibility. Barriers and challenges are shrinking disposable income, increasing competition (market share), Rising costs, falling staff morale, bad debts, Adapting to consumer needs, access to funding and start-up capital; as well as socio- economic factors. An integrated framework to provide SME’s in the fast food franchise industry with the necessary support to be sustainable, access start-up funding and capital to expand their business is recommended. Keywords - Fast Food, Franchise, Funding, Sustainability, Small Businesses, South Africa

    Download PDF: The Success Factors, Barriers And Challenges Faced By Franchisee (Sme’s) Operating A Fast Food Outlet In South Africa
  4. Examining Sustainability Performance Of Ftse/Jse Responsible Investment Top 30 Index Constituents

    Rendani Mavis Matakanye, Jan Kruger

    Paper ID IA-ICEBMBLI-30078-9237 · Pages 21-25

    Abstract

    The paper examines the sustainability performance of 32 companies listed in the FTSE /JSE responsible investment Top 30 Index. The study uses CSR ratings retrieved from the CSR Hub as proxy for sustainability performance. The CSR Hub rates sustainability performance based on four dimensions which are; Community, Employees, Environment and Governance (CSR Hub 2018). Highly regulated companies may outperform least regulated companies as far as sustainability is concerned. Keywords - Sustainability Disclosures, Sustainability Performance, CSR Hub, Regulation

    Download PDF: Examining Sustainability Performance Of Ftse/Jse Responsible Investment Top 30 Index Constituents
  5. Laser Welding Characteristics Of 9% Nickel Steel

    Ji-Sun Kim, In-Ju Kim, Jaewoong Kim

    Paper ID IA-ICMAEBALI-30078-8993 · Pages 26-28

    Abstract

    This study proposes a new method of 9% Nickel steel welding that can be applied at a high speed by using laser welding technique. This method does not require the use of any filler material to solve the problem of strength reduction of 9% nickel steel weld zone and various problems arising from arc welding. In addition, experiments were performed using various welding parameters to analyze the laser welding characteristics of 9% Nickel steel used as cryogenic steel. Index Terms - 9% Nickel Steel, Laser Welding, Filler Material, Welding Parameter.

    Download PDF: Laser Welding Characteristics Of 9% Nickel Steel
  6. 2-Dimensional Analysis Of The Partial Soi Type Isolation Mosfet With Different Buried Insulator Dielectric

    Young Kwon Kim, Myoung Jin Lee, Jin Sung Lee, Geon Kim

    Paper ID IA-ICRAETBALI-30078-8958 · Pages 29-32

    Abstract

    As scaling down the DRAM cell size, the conventional MOSFET degrade device performance in terms of short channel effects. A solution for these issues is the Silicon-on-Insulator (SOI) MOSFET. However, it suffers from low threshold voltage, back gate interface issue, floating body effect such as kink effect, and high price, even though it shows low power consumption, self-limited shallow junction, improved Drain Induced Barrier Lowering (DIBL). To overcome the problem, a new device partial SOI type isolation MOSFET has been introduced [1]. The structure of this device is obtained by penetrating the insulator below the N type doped region near the drain region. And the lateral encroachment length of the buried insulator is controlled by isotropic etch time. This device can effectively improve short channel effects while improving the disadvantages of the conventional MOSFET and the SOI MOSFET. In the paper, the partial SOI type isolation MOSFET having 100nm node of gate channel length is investigated using Sentaurus TCAD 2-D device simulator [2]. And This study was conducted to investigate the performance of partial SOI type isolation MOSFETs according to the dielectric constant. The results show that the low-k dielectric of the buried insulator increases the threshold voltage and improves the DIBL characteristic due to decrease in the depletion region width near the drain region. Also, it is confirmed that the kink effect disappears unlike the SOI MOSFET due to the difference in structure. Index Terms - Drain Induced Barrier Lowering (DIBL), Silicon-On -Insulator (SOI), Short Channel Effect (SCE)

    Download PDF: 2-Dimensional Analysis Of The Partial Soi Type Isolation Mosfet With Different Buried Insulator Dielectric
  7. The Glue That Binds Domestic Workers And Employers In Armed Conflict Society: A Case Of Changara Village In Mozambique

    Nyanga Takupiwa, Jan Kruger, Rosemary Sibanda

    Paper ID IA-ICSSHBLI-30078-8870 · Pages 33-35

    Abstract

    Armed conflict in Africa and beyond has become one of the key precipitators to unemployment, deterioration of working conditions, poverty and impeded socio-economic development. The purpose of this study was to establish the factors that bind domestic workers and employers in armed conflict society. This study used a purely qualitative methodology. An interview solicited data from eight purposively sampled domestic workers in Changara village in Tete province, Mozambique. The findings of the study indicated that job satisfaction and poverty are the key antecedents that bind domestic workers and their employers. The provision of social services such as health facilities and education to domestic workers and their children, assistance of domestic workers’ displaced relatives and provision of physical security are some of the factors that bind domestic workers and their employers. The study recommended that employers should provide adequate socio-economic support and avoid exploiting them by giving them low wages and also sexually and emotionally harassing them. Keywords: Armed Conflict, Employers, Domestic Workers, Job Satisfaction

    Download PDF: The Glue That Binds Domestic Workers And Employers In Armed Conflict Society: A Case Of Changara Village In Mozambique