19TH IASTEM INTERNATIONAL CONFERENCE
Kuala Lumpur, Malaysia 03-04-2016
ISBN 978-93-85973-86-4
12 papers
-
Role Of Coir Fibre In Crack Reduction In Concrete
Saksham Bhutani, Shubham Kr. Bansal, Parvindar Singh, Sb Dwivedi
Paper ID IA-ICCAEKLMPR-02046-01 · Pages 1-3
Download PDF: Role Of Coir Fibre In Crack Reduction In ConcreteAbstract
The role of coir fibre to reduce the cracks in cement concrete has been evaluated on the basis of performance of coir fibre in the test performed. As the natural fibres are renewable and nonabrasive, the natural fibre can be very promising. The coir fibre, having the highest toughness among all the existing natural fibres and a good shock absorber as well, is used in concrete. Compressive strength, split tensile strength and petrography tests were executed for analysis of crack reduction. It has been found out that cracks are reduced by coir fibre addition in concrete, with almost equivalent compressive and split tensile strength in comparison to the plain cement concrete. It has been deduced that coir fibre concrete showed ductile failure. The petrography test showed no degradation after 28 days in surface of coir fibre even in the alkaline environment of concrete. Index Terms- Coir fibre, crack, compressive strength, splitting tensile, petrography test
-
Numerical Modeling Of Single Pile In A Two-Layered Soil
Wattamwar Mayur Kishanrao, Arun Prasad
Paper ID IA-ICCAEKLMPR-02046-02 · Pages 4-6
Download PDF: Numerical Modeling Of Single Pile In A Two-Layered SoilAbstract
The purpose of this article is to elucidate the behavior of single pile under axial loading in a two-layered soil, as far as settlement and load transfer mechanisms are concerned. Design of axially loaded piles due to the load from the structure relies on a number of theoretical and numerical approaches. Finite element analysis offers an excellent way to study the soil-pile interaction and pile’s response under the axial loading due to structural load. This paper presents the results of modeling in 2D finite element package Plaxis for the case of axially loaded single pile under axis-symmetric conditions, two-layered soil. The results are presented in the form of Load vs Settlement graphs for different slenderness ratio of the pile (L/D= 7.5, 10, 12.5). Two types of layering systems, i.e. soft clay overlying stiff sand and vice-versa are also considered. Results were also verified by using ALPA-XL spreadsheet designed by the researchers of Purdue University which is openly available on the web. Reasonable agreement has been achieved in comparing the single pile’s response against the published results of the pile. Index Terms- Axially loaded piles, Layering, Plaxis 2D, Soil-pile interaction, Two-layered soil.
-
Comparative Analysis Of Dynamic Response Of A Model Building Using Smartphone Accelerometer Applications
Priyanshu Dewan, Siddhartha Pathak, Rajesh Kumar, Paul Cahill, Vikram Pakrashi
Paper ID IA-ICCAEKLMPR-02046-1138 · Pages 7-12
Download PDF: Comparative Analysis Of Dynamic Response Of A Model Building Using Smartphone Accelerometer ApplicationsAbstract
Many smartphones offer a wide array of inbuilt sensors capable of recording acceleration responses. This has a promise of applications in a range of fields. High-storey buildings subjected to varying base excitation is one such example. This study investigates the possibility of monitoring the dynamic responses of buildings subjected to base excitation and compares a number of Smartphone Application responses in this regard against the responses of an accelerometer of significantly higher specification recording the same responses. The work also investigates the possibility of these cheap Smartphone Applications to assist or replace high-specification devices. The tests are carried out on a model 6-storeyed building in a laboratory environment for different frequencies and amplitudes of excitation. Keywords- Smartphone Applications, Accelerometer, Base Excitation, Sensors, Model Building, Vibration
-
Study On Plate Element Using Classical Theory And Finite Element Method
Priyanshu Dewan, Siddhartha Pathak, Rajesh Kumar, Jyoti Katiyar
Paper ID IA-ICCAEKLMPR-02046-1139 · Pages 13-18
Download PDF: Study On Plate Element Using Classical Theory And Finite Element MethodAbstract
The fundamental obstacle in Structural Mechanics is the determination of deformational response of the structures subjected to different loading conditions. Various researchers have devised Classical theories for resolving the static and dynamic loading on structures. However, the Classical method of analyzing the structures become inconvenient under complicated boundary conditions. In order to overcome such complications the use of modern software, utilizing new methods like Finite Element Method (FEM), Matrix Method etc. have become quite frequent in the field of Structural Mechanics. This paper provides a comparative analysis of the results estimated by the Classical Plate Theory of Timoshenko and Krieger and those obtained by a Finite Element Method(FEM) based Software in case of a plate subjected to loading under different supporting conditions. This paper suggests the advantageousness and aptness of the FEM based software in estimating the response of plate element. Keywords- Plate, Classical Theory of Plates, Finite Element Method, ANSYS, Plate with hole, Timoshenko and Krieger.
-
Water And Wastewater Infrastructure And Sustainability In Developing Countries – A Review
B. Kachallah, A.D. Maidoki, A. Liman, S. Idris
Paper ID IA-ICCAEKLMPR-02046-1142 · Pages 19-23
Download PDF: Water And Wastewater Infrastructure And Sustainability In Developing Countries – A ReviewAbstract
Urbanization creates water sustainability issues, which increases water consumption. For instance, in the Asia–Pacific areas, water consumption per day per person ranges from 250–300 litres, whereas in developing countries it is projected to range from 60–200 litres person per day, the increasing urbanization which leads to higher water consumption and the related demand for sanitation services dwelling large strain on water resources and infrastructure. The wastewater treatment plant is also compromised as cities expand because the infrastructure becomes unable to deal with the growing load of wastewater generated. Moreover, disposal of untreated sewage to water bodies is not acceptable and even transport over long distances through aging infrastructure taking the danger of leakage and contaminate groundwater due to leachate. The paper review four major challenges to providing safe water and sanitation on a global basis: (1) Climate change, (2) Population growth, (3) water pollution, (4) Rapid urbanisation growth Keywords- Water, Wastewater, Infrastructure, Sustainability, Developing countries.
-
Determinants And Impact Of The Corporate Social Responsibility Disclosure: Evidence From UAE Banks: Islamic Versus Conventional
Nejlaoulddaoudellili, Haithamnobanee
Paper ID IA-ICEBMKLMPR-03046-02 · Pages 24
Download PDF: Determinants And Impact Of The Corporate Social Responsibility Disclosure: Evidence From UAE Banks: Islamic Versus ConventionalAbstract
In the recent years, the listed companies have known a growing pressure to disclose their Corporate Social Disclosure (CSR) information in order to provide sufficient and adequate information about their compliance with the social standards. The annual report and the websites are considered to be as the most important sources of information providing several kinds of information about the company (qualitative and quantitative, financial and non-financial, current and future, actual and prospective). In the context of emerging market, we conduct this research with the objective of measuring the degree of CSR disclosure, identifying its relevant determinants and then examining its impact on the banking performance by differentiating between the Islamic and Conventional banks. In fact, this work aims to measure the degree of CSR disclosure in annual reports and websites and examine its impact on the banking performance of Islamic and conventional banks listed on the UAE financial markets for the period 2003-2013. To our knowledge, there is no single research conducted in UAE about the significant impact of the relevant determinants of the CSR, therefore, our research provides the first insight regarding this topic. Keywords- CSR Disclosures, Corporate Governance, Annual Reports, Banking Performance, Panel Data. JEL Classification: C33, G32, G34
-
Direct Nitridation Of Aluminium Under Flowing Nitrogen Gas: The Effect Of Oxygen Pressure
Evarastics Polycarp, Azmi Bin Rahmat, Shamsul Baharin Jamalludin, Gowon Baba
Paper ID IA-ICMAEKLMPR-02046-1143 · Pages 25-29
Download PDF: Direct Nitridation Of Aluminium Under Flowing Nitrogen Gas: The Effect Of Oxygen PressureAbstract
AlN has found applications in the automobile industry, aerospace, electronic industry, high temperature applications and other areas. Nitridation of aluminium in the forms of ingot and powder were carried out in a stainless steel tube furnace under flowing nitrogen gas at temperatures below the melting point of aluminium (5500 – 6300C). Magnesium powder and hydrogen gas were separately used to reduce the oxygen pressure of the furnace. The results showed that the use hydrogen gas successfully reduced oxygen pressure below the permissible value, which promoted nitridation process. XRD results gave AlN peaks with highest intensities (for both Al coupon and powder) at 6300C after 4 hours of holding time when hydrogen gas was jointly flown with nitrogen gas into the furnace. The AlN peak intensities increased with temperature and holding time. XRD result did not revealed AlN peaks in the Al coupons nitrided in the absence of hydrogen gas. Keywords- Aluminium, Aluminium Nitride, Direct Nitridation, Oxygen Pressure, XRD,
-
Three Dimensional Micro-Modeling Of Masonry Unit Using Finite Element Method
Yash Sharma, Pr Maiti
Paper ID IA-ICRAETKLMPR-02046-01 · Pages 30-33
Download PDF: Three Dimensional Micro-Modeling Of Masonry Unit Using Finite Element MethodAbstract
Masonry system is an alternate way of constructing low to medium rise building. Masonry structures are popular because of its low cost, thermal and sound insulation, easy availability and good vertical loading resistance. Masonry units are consisting of Mortar and Bricks. In this present study, the strength behavior of masonry components is investigated in the elastic region. A three-dimensional micro-model consisting of discrete elements of brick, closure and mortar are used in the analysis which together formed a 3D masonry wall. Finite element method is used to model the masonry structure. Stress analysis is carried in the masonry single brick wall having discontinuous vertical joints for different vertical load applied at the top of the wall. The stress developed in the lime mortar joint interface elements was found more than in brick element. Homogenization principles of material lead to a smoothing of stresses but in real case the elastic properties of mortar and brick portion are different. Therefore, an adequate safety factor must be adopted to compensate for the underestimation of peak stress values. Index Terms- FEM, Interface, Micro-Modeling, Masonry Structure
-
Effects Of Sulphate And Chloride Contaminated Water On Concrete
Shubham Kumar Bansal, Saksham Bhutani, Wattamwar Mayur Kishanrao, K.K. Pandey
Paper ID IA-ICRAETKLMPR-02046-02 · Pages 34-36
Download PDF: Effects Of Sulphate And Chloride Contaminated Water On ConcreteAbstract
One of the main causes of deterioration of concrete structures is the distress of concrete due to its exposure to harmful chemicals that may be found in contaminated water. It is found that the most aggressive chemicals that affect the durability of structures are chlorides, sulphates and acids. The effects of chemicals on quality characteristics of concrete have been evaluated on the basis of tests performed in laboratory. Compressive strength, mass loss and petrography tests were executed for analysis of the effects of respective ions on concrete. It has been deduced that the compressive strength of concrete progressively decreases with longer curing period under internal and external exposure of water having sulphate and chloride ions and the concrete mass loss increases with the length of curing period. Petrography tests show the prominence of voids and micro cracks in concrete. Index Terms- Quality characteristics of concrete, deterioration, compressive strength, mass loss, and petrography test
-
The Effects Of Non-School Factors On Sports Participation Of Successful Athletes
Abida Naseer, Abd Rahim Bin Mohd Shariff, Saeed Javed
Paper ID IA-ICSSHKLMPR-03046-1146 · Pages 37-40
Download PDF: The Effects Of Non-School Factors On Sports Participation Of Successful AthletesAbstract
The goal of the current study is to examine the effects of various non-school factors (socio-cultural and social personal factors) related to sports participation of successful female athletes at secondary schools of Pakistan. The problem to be addressed in the existing study was inadequate social economic position, poor sports facilities, intangible rewards for achievement, and sport media coverage as socio-cultural factors and practice environment is also non-supportive to improve their body image as social personal factors for female school athletes. A sample of 46 successful female athletes from three secondary schools was preferred as respondents. Descriptive statistics was employed as statistical tool. The findings of the existing study revealed that socio-cultural factors through socio-economic status, sports facilities, rewards for achievement, and sport media while social personal factors via practice environment and body image fully effected the sports participation of successful female athletes and these factors may decrease participation of female athletes in sports in Pakistan. Keywords:
-
Adaptive Comfort In Buildings Located At The Hot Dry Condition Of Damaturu - Nigeria
Saidu Idriss, Mohammed H. Mukhtar, Abubakar Liman, Babagana Kachalla
Paper ID IA-ICSTMKLMPR-02046-01 · Pages 41-44
Download PDF: Adaptive Comfort In Buildings Located At The Hot Dry Condition Of Damaturu - NigeriaAbstract
Heat tolerance was measured in buildings located in hot dry area. The occupants of three buildings selected within the faculty of sciences, Yobe State University, Damaturu (Chemistry Laboratory, Physics Classroom and Lecture Hall B) were studied about their responses to peak values of thermal parameters for three consecutive days. The morning and evening measures were taken with (Thermometer, Anemometer and Hygrometer) where Thermal Comfort Questionnaire Survey was used in accessing the occupants. The results revealed that over eighty percent (80%) of the indoor users in each case were comfortable within higher values of thermal parameters. It was numerically recorded across the three buildings that when pMT was at (40 – 50) ºC while pRH and pV were constant, 86.3% of indoor users were comfortable within the indoor condition; but when pMT was at same value as above while pRH and pV set to outdoor condition, 77% of indoor users were comfortable within the indoor condition. The study concluded that heat tolerance in buildings increases in ratio of 1.12/1.0 with the decrease of outdoor air infiltration for users to become more comfortable indoor. School buildings should follow a reduced infiltration of outdoor poor thermal conditions in the area so that the required majorities (80) % were comfortable. Keywords- Thermal Parameters, Heat Tolerance, Adaptive Comfort, Occupants, Thermal Discomfort, Hot Dry Condition.
-
Response Of Broiler Chicks To Dietary Moringa Seeds And Zigbir As Natural Growth Promoters
Mohamed Elamin Ahmed, Talha Elsadig Abbas
Paper ID IA-ICSTMKLMPR-02046-02 · Pages 45-48
Download PDF: Response Of Broiler Chicks To Dietary Moringa Seeds And Zigbir As Natural Growth PromotersAbstract
In a 42-day experiment the effect of moringa seeds and Zigbir on growth performance and carcass characteristics was studied. One hundred twenty, 1day-old, unsexed Ross 308 broilers were purchased from commercial hatchery. The initial live body weight of the chick was (47.00 g ±0.67). The chicks were randomly assigned to 4 dietary treatments containing 3 replicates of 10 birds each. Starter and finisher experimental diets consisted of control, 0.04% zigbir, 0.5% undecorticated moringa seeds UDCM and 0.5% decorticated moringa seeds DCM. Data were analyzed in completely randomized design using the general linear model (GLM) procedure. Feed intake, body weight gain, FCR and PER were not significantly (P≥0.05) influenced by dietary treatments except feed intake during starter phase. Dietary moringa seeds both decorticated or undecorticated significantly (P≤0.05) reduced feed intake during starter phase compared to control and zigbir supplemented groups. However, DCM seeds improved overall body weight gain by 5.58, 5.78 and 10.43%, when compared to control, Zigbir and UDCM seeds group, respectively. During all growth phases, the performance of birds fed dietary zigbir was not significantly (P≥0.05) different versus control. On the other hand relative weight of breast was significantly (P≤0.05) higher for birds fed DCM seeds compared to the others. It was concluded that supplementation of DCM seeds improved growth performance of the broilers. Keywords- Decorticated moringa, Zigbir, Broiler performance, Carcass.