IASTEM INTERNATIONAL CONFERENCE
Manila, Philippines 16.06.2016
3 papers
-
Exergy Analysis of Combined Organic And Lng Rankine Cycles With Different Source Temperatures
Kyoung Hoon Kim, Chul Ho Han
Paper ID IA-ICMAEMANI-16066-1426 · Pages 1-5
Download PDF: Exergy Analysis of Combined Organic And Lng Rankine Cycles With Different Source TemperaturesAbstract
The performance of power generation system can be improved by using liquefied natural gas (LNG) cold energy and thus the utilization of LNG cold energy has been an interesting area of study. In this paper an exergetical analysis is carried out for a combined cycle of an organic Rankine cycle (ORC) and a LNG Rankine cycle utilizing low-grade heat source in the form of sensible energy. The effects of the system parameters such as turbine inlet pressure of the working fluid or source temperature on the exergy destruction at each component as well as the total exergy efficiency are investigated extensively. The results indicate that the greatest exergy destruction ratio of the system depends on the reduced turbine inlet pressure and source temperature. The exergy efficiency decreases for low source temperature but increases for high source temperature as the turbine inlet pressure increases. Keywords- Organic Rankine Cycle (ORC), Liquefied Natural Gas (LNG), Exergy, Exergy Destruction, Exergy Efficiency
-
Thermodynamic Analysis Of Organic Rankine Cycle Using Lng Cold Energy Depending On Source Temperatures
Kyoung Hoon Kime, Se Woong Kim
Paper ID IA-ICMAEMANI-16066-1428 · Pages 6-10
Download PDF: Thermodynamic Analysis Of Organic Rankine Cycle Using Lng Cold Energy Depending On Source TemperaturesAbstract
This paper presents a thermodynamic analysis for a combined cycle consisting of an organic Rankine cycle (ORC) and a liquefied natural gas (LNG) Rankine cycle for the recovery of low-grade heat source energy and LNG cold energy. Based on the thermodynamic models of the combined cycle, the effects of the turbine inlet pressure of the working fluid and the source temperature on the system performance are parametrically investigated. Results show that the specific net work has the peak value and the net heat input rate of system decreases with increasing turbine inlet pressure. The thermal efficiency increases with increasing turbine inlet pressure and the source temperature, however, the effect of the source temperature on the thermal efficiency is insignificant. Keywords- Organic RankineCycle (ORC), Liquefied Natural Gas (LNG), Low-Grade Heat Source, Power Generation
-
Oscillatory Flow of Air Over Magnetic Fluid Coated on Oscillating Flat Plate
Hyung Jong Ko, Kyoung Hoon Kim
Paper ID IA-ICMAEMANI-16066-1443 · Pages 11-16
Download PDF: Oscillatory Flow of Air Over Magnetic Fluid Coated on Oscillating Flat PlateAbstract
This study deals with an oscillatory flow of air over a uniform magnetic fluid coating on a flat plate oscillating in its own plane. The steady state solution of the oscillatory flow problem in air and magnetic fluid satisfying the boundary and the interface conditions are obtained using a complex shape function, from which the distributions of velocity and shear stress are determined. Special attention is paid to the behaviors of the velocity and the shear stress profiles and the time evolution of interface velocity, interface shear stress, and wall shear stress for varying oscillation frequency. The results for a particular set of density and viscosity ratios of 0.001 and 0.004 show that the flow decays exponentially in space with a rate proportional to the frequency parameter. The flow variables at the interface and the wall exhibit different behaviors with respect to the frequency parameter. Keywords- Air, Flat Plate, Frequency, Magnetic Fluid Coating, Steady State Oscillation.