Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

IASTEM INTERNATIONAL CONFERENCE, Ottawa, Canada 11-08-2016

← All proceedings

Proceedings cover: IASTEM INTERNATIONAL CONFERENCE, Ottawa, Canada 11-08-2016

IASTEM INTERNATIONAL CONFERENCE

Ottawa, Canada 11-08-2016

3 papers

  1. Swing Up And Transition to Optimal Control For A Single Inverted Pendulum

    Masoud Razban, Amir Hooshiar, Naghmeh M.Bandari, Chun Yi Su, Javad Dargahi

    Paper ID IA-ICMAECAN-11086-03 · Pages 1-6

    Abstract

    Parameter identification and swing up control of a single inverted pendulum is presented. Using Lagrangian method, the mechanical model of system was derived and the parameters were identified via energetic description of system. Energy based strategy for swing up controller and LQR approach for stabilization were implemented. A smooth weighted transition was proposed to hinder overshoot caused by switching from swinging up to stabilization controllers. The model of system was developed and its results were verified by experiments. The proposed weighted transition method was verified to decrease jerk and overshoot in the system. Key words- Optimal Control, Swing up, LQR, Parameter Identification, Inverted Pendulum

    Download PDF: Swing Up And Transition to Optimal Control For A Single Inverted Pendulum
  2. Development of Mini Vibration-Powered Generator

    Wen-Dian Lou, Sheng-Ching Wang, Yu-Chi Wu, Jin-Yuan Lin

    Paper ID IA-ICAETCAN-11086-1 · Pages 7-13

    Abstract

    This study aims to design a mini vibration-powered generator to acquire the vibration power in the nature. With the electromagnetic field simulation software, ANSYS Maxwell, and the circuit analysis software, ANSYS Simplorer, we evaluate the generator performance by converting its alternating voltage to stable direct voltage for a resistive load. Then the generator performance is evaluated with the load voltage. Furthermore, Taguchi method is utilized for analyzing the optimal combination of permanent magnet size and core diameter size for the generator. Finally, a vibration-powered generator based on the proposed design is realized, and its property is actually measured. Keywords- Vibration-powered generator, ANSYS Maxwell, ANSYS Simplorer, Taguchi Method.

    Download PDF: Development of Mini Vibration-Powered Generator
  3. Preparation And Physicochemical Evaluation of Tocopheryl Polyethylene Glycol Succinct 1000, 5000 (Tpgs 1k, 5k) Micelles For Delivery Of Paclitaxel

    Mahboubeh Rezazadeh, Jaber Emami, Farshid Hassanzadeh

    Paper ID IA-MBPSCAN-11086-01 · Pages 14-17

    Abstract

    The objective of the present study was to evaluate the potential of paclitaxel (PTX) loaded mixed micelles fabricated from tocopheryl polyethylene glycol succinate 1000, 5000 (TPGS 1K, 5K) as a sustained release system. Here, we developed a micellar system with a newly synthesized TPGS5k polymer, which showed lower CMC of 0.078 mg/ml compared with traditional micelles prepared with TPGS1k to achieve sustained and controlled drug delivery. The blank and drug loaded micelles were prepared in different weight ratios of TPGS1K/TPGS5K by solvent evaporation technique. Physicochemical properties of the micelles such as critical micelle concentration, micelle size, entrapment efficiency, and release properties were investigated in detail. The results showed that mixed micelles made of TPGS 1K and TPGS 5K (weight ratio 3:7) had lowest CMC value, indicating that they were most stable towards dilution among micelles. Particle sizes and zeta potentials of the micelles were in the range of 50.3–102 nm and 18.5–28.3 mV, respectively. The drug entrapment efficiencies of the micelles were within 63.6–92.5% (w/w). The results revealed that adding TPGS 5K could increase the drug loading. The drug loaded micelles exhibited a sustained release behavior in dissolution medium. From the micellar formulation, approximately 30% of PTX was released within 10 h at 37◦C, afterwards, the release rate slowed down and was almost complete after 5 days. In comparisons, 50% of PTX was released rapidly from Anzatax® (PTX in Cremophor El) within 5 h and it was released completely after 30 h. Index Terms- Paclitaxel, α-tocopheryl polyethylene glycol succinate, Micelles

    Download PDF: Preparation And Physicochemical Evaluation of Tocopheryl Polyethylene Glycol Succinct 1000, 5000 (Tpgs 1k, 5k) Micelles For Delivery Of Paclitaxel