38TH IASTEM INTERNATIONAL CONFERENCE
Rome, Italy 09-11-2016
ISBN 978-93-86291-26-4
4 papers
-
Fuzzy Terminal Sliding Mode Control For Maximum Power Point Tracking of PV Cells
Mohammad Rasool Mojallizadeh, Mohammad-Ali Badamchizadeh
Paper ID IA-CARVEROME-09116-01 · Pages 1-5
Download PDF: Fuzzy Terminal Sliding Mode Control For Maximum Power Point Tracking of PV CellsAbstract
This paper proposes a fuzzy terminal sliding mode controller (FTSMC) for maximum power point tracking (MPPT) of photovoltaic (PV) power generation systems. Finite time convergence of the proposed system is ensured. The proposed system utilizes a Mamdani fuzzy inference system (FIS) to tune the control gain. As a result, the chattering problem, which exists in classic terminal sliding mode controllers (CSMC), is avoided. A CTSMC is considered in order to compare the results of the proposed system. Simulation results are used to evaluate the robustness of the proposed system. It is shown that the proposed system is robust to system uncertainties, environment changes and load variations. Index Terms- FTSMC, Sliding mode, Fuzzy, MPPT, PV, Control.
-
A New Fuzzy Based Controller Design to Achieve Synchronization Between Time-Varying Fractional-Order Chaotic Systems
Sehraneh Ghaemi, Reza Behinfaraz, Sohrab Khanmohammadi
Paper ID IA-CARVEROME-09116-02 · Pages 6-10
Download PDF: A New Fuzzy Based Controller Design to Achieve Synchronization Between Time-Varying Fractional-Order Chaotic SystemsAbstract
Synchronization of time-varying fractional unified chaotic systems is studied, in this paper. Parameter of an unified chaotic system plays an important role in chaotic systems. Also orders of systems have undeniable effect on fractional-order chaotic systems. We consider parameter and orders of this system as a time-varying system. synchronization of two different fractional order unified chaotic systems with a controller which is based on Lyapunov stability theory. Numerical simulation is shown to verify the results. Index Terms- Synchronization, Time-varying parameter , Unified chaotic system , Fuzzy based controller.
-
Fabrication of Snox Resistive Random Access Memories By Using A Solution Process
Chih-Chieh Hsu, Po-Yang Chuang
Paper ID IA-ICRAETROME-09116-01 · Pages 11
Download PDF: Fabrication of Snox Resistive Random Access Memories By Using A Solution ProcessAbstract
Resistive random access memories (ReRAMs) have attracted much attention as future nonvolatile memories due to their advantages of low power consumption, high switching speed, and high density integration [1]. RRAMs by using solution processed SnOx thin films as the resistive switching layers were studied in this work. The SnOx precursor solution was prepared by dissolving 0.2 g tin(II) chloride dihydrate [Cl2Sn2∙H2O, 98% purity, Alfa Aesar] into 8 ml ethanol and subsequently stirred at 85 ℃ for 24 h to obtain a transparent solution. The 240-nm-thick ITO was deposited on the glass substrate as the bottom electrode. The first SnOx film was spin coated onto the ITO/glass substrate at an initial speed of 1500 rpm for 10 s and a final speed of 3000 rpm for 30 s. The deposited SnOx film was then dried on a hot plate at 90 ℃ for 1 min. The second and third SnOx films were stacked by using the same procedure, followed by a curing process at 120 ℃ for 10 min. The top electrode was fabricated by applying silver paste to the SnOx surface to obtain the Ag/SnOx/ITO RRAMs. Resistive switching behavior can be obtained at a bias loop of 0 V 5 V0 V -5 V 0 V. The resistance window is ~1000. This value is nearly 20 times larger than 55 of an Al/SnOx/Pt RRAM, which used a sputtered SnOx thin film as a resistive switching layer [2]. In addition, the maximum process temperature in this work is 120 ℃, which is significantly lower than 300 ℃ in the literature [2]. The high-performance SnOx RRAM fabricated by a simplified, low-cost and low-temperature process was demonstrated in this paper. The conduction current in the low resistance state (LRS) was found to be dominated by Ohmic conduction. When the RRAM switched to the high resistance state (HRS), space charge limited conduction can explain the carrier transport. The mechanism for the switching from HRS to LRS was explained by oxygen ion migration. The surface morphology and thickness of the SnOx layer were examined by a scanning electron microscopy and an atomic force microscopy. The carrier concentration and mobility were investigated by Hall measurement while the SnOx composition was studied by an energy-dispersive X-ray spectroscopy and an X-ray photoelectron spectroscopy. Besides, the transmittance and energy bandgap were also measured by a UV-visible spectroscopy. The proposed mechanisms were supported by above-mentioned analyses. The measurement results are self-consistent and their mutual correlations were studied. Keywords- Oxide semiconductors, Memories, Solution process, Electrical characteristic
-
Impact Assesment Concerning Adoption of The Tax Exemption on The Salary of Researchers
Sorin Mircea Axinte, Bogdan Adrian Ciocanel, Gabriela Ivanus
Paper ID IA-ICSTMROME-09116-01 · Pages 12-15
Download PDF: Impact Assesment Concerning Adoption of The Tax Exemption on The Salary of ResearchersAbstract
The study hereby took into account the pressure exercised by the need (2016-2020) to increase on medium-term the research & development expenses in Romania up to 2% of GDP. The study represents an assessment of the economic impact of changing the tax policy regarding the salary tax in the case of researchers, namely: salary tax exemption of this category of staff. The direct impact consists in increasing of the researchers number and increasing of R&D costs, and the indirect impact consists in increasing of GYR per capita at regional level and of the share of exports of high technology products out of the total exports Keywords- impact, tax exemption, researchers salary