Skip to content
International Academy of Science, Technology, Engineering and Management (IASTEM)

Conference Proceedings

41ST IASTEM INTERNATIONAL CONFERENCE, Melbourne, Australia 06-12-2016

← All proceedings

Proceedings cover: 41ST IASTEM INTERNATIONAL CONFERENCE, Melbourne, Australia 06-12-2016

41ST IASTEM INTERNATIONAL CONFERENCE

Melbourne, Australia 06-12-2016

ISBN 978-93-86291-51-6

6 papers

  1. Calibration of Bridge Deck Deterioration Modelusing Non-Destructive Evaluation

    Farzad Ghodoosi, Ashutosh Bagchi, Tarek Zayed

    Paper ID IA-ICCAEAUS-06126-02 · Pages 1-6

    Abstract

    Performance of highway bridge decks should be monitored with special care especially in the regions where deteriorating conditions weaken the deck capacity with time. Bridge deterioration model is a powerful tool to predict the performance of bridge structural elements based on the results of visual inspections and Non-Destructive Evaluation (NDE) e.g. Ground Penetrating Radar test (GPR). In this research, a system reliability based deterioration model for a simply-supported reinforced concrete bridge deck is developed and calibrated. The structural conditions of deck structural elements are applied in a non-linear Finite Element model while system level reliability indices are estimated accordingly. Primary deterioration model for the deck is first developed for the uniformly contaminated concrete deck. Afterwards, the developed primary degradation model is updated based on a GPR test localized defect map. This article demonstrates the procedure for development and calibration of system reliability based deterioration model of reinforced concrete bridge decks. Index Terms—Deterioration Model, Ground Penetrating Radar test (GPR), Reliability, reinforced concrete bridge deck.

    Download PDF: Calibration of Bridge Deck Deterioration Modelusing Non-Destructive Evaluation
  2. Seismic Design For High-Rise Structures

    Mohammad Javed Shadan

    Paper ID IA-ICCAEAUS-06126-2170 · Pages 7-11

    Abstract

    In this study, the construction of high-rising buildings that lies within the geologically complex region of San Francisco, is investigated. After completing the geological research of the Bay area, for the seismicity testing, a model structure of 28 story building (The Orion Tower) is constructed from balsa wood which the woods are connected to each other by glue. Keywords— Seismic design, Balsa wood, Columns, Structural-model, eccentric loading.

    Download PDF: Seismic Design For High-Rise Structures
  3. Transient Analysis of Bridges Under Impulse Loading Using The Finite Prism Formulation

    Omar Mohammad Younis, Ayad Thabet Saeed Alghabsha

    Paper ID IA-ICCAEAUS-06126-2456 · Pages 12-18

    Abstract

    In the present work the finite prism formulation was employed for the transient analysis of bridges under suddenly applied pulse loading. In this method a combinationof the finite element method representing the cross section of the prism and Fourier series suitably chosen to represent the behavior of prism in the longitudinal direction (which satisfies the simply supported boundary conditions at the ends), is used. Explicit time integration scheme was used for solving the equation of motion for the bridge. In the present work the damping was neglected in the formulation of the equation of motion of bridges. This render is used to avoid the solution of global system of equations, because each equation becomes uncoupled with other equations. One of the main aspects in the present work is the coupling of the explicit solution technique of the equation of motion with the harmonic solution, using the finite prism method for the problem of bridges under suddenly applied pulse loading. The present results agree closely with the results available in the literature for plates. Keywords— Finite prism Method, Transient Analysis, Impulsive Loads, Sudden Loads, Pulse Shape, Pulse Duration, Explicit Time Integration Scheme.

    Download PDF: Transient Analysis of Bridges Under Impulse Loading Using The Finite Prism Formulation
  4. A Commercial Activated Carbon Powder as a Medium for Electrochemical Hydrogen Storage: An Experimental Investigation on Electrochemical Hydrogen Storage Capacity With Potential Application in Automobiles

    Amandeep S. Oberoi, Baljit Singh, Muhammad Fairuz Remeli

    Paper ID IA-ICMAEAUS-06126-01 · Pages 19-24

    Abstract

    Emissions from automobiles running on conventional hydrocarbon-based fossil fuels have lead to increase in concentration of green-house gases (GHGs) that further have contributed in global warming to a great extent. For past few decades hydrogen has emerged as a potential alternative of conventional fossil fuels that could be stored on board and produced domestically and therefore, is globally considered as a future fuel. But, efficient and safe storage and few challenged to be addressed by the researchers. One solution to the problem is electrochemical storage of hydrogen in a porous medium and its utilisation in fuel cell to generate electricity to power the automobile. The presented paper therefore, focuses on determining the electrochemical hydrogen storage capacity of a commercial activated carbon (aC) electrode soaked in acid with potential application in hydrogen fuel cell. The method of fabrication of solid activated carbon electrode is explained in detail. The proton conductivity, double-layer capacitance and electrochemical hydrogen storage capacity of the sample electrode was measured at different levels of hydration. All the testing procedures are discussed and obtained results are used to reach conclusion and recommend future work. The proton conductivity of a fully hydrated commercial aC electrode soaked in 1 mol. sulphuric acid was found to be 0.0110 S/cm, double-layer capacitance as 41.0 F/g, and electrochemical hydrogen capacity as 1.08 wt%. The measured hydrogen capacity is comparable with commercially available metal-hydride based hydrogen storage canisters, lithium-ion and lithium-polymer batteries. The work demonstrates the flow of hydrogen to-and-fro activated carbon electrode soaked in acid that could be used in PEM fuel cell as an integrated hydrogen storage medium and has a potential application in automobiles. Index Terms— Activated Carbon, Proton Conductivity, Double-Layer Capacitance, Electrochemical Hydrogen Storage.

    Download PDF: A Commercial Activated Carbon Powder as a Medium for Electrochemical Hydrogen Storage: An Experimental Investigation on Electrochemical Hydrogen Storage Capacity With Potential Application in Automobiles
  5. CFD Analysis Of Virtual Surgery For Patient With Chronic Sinusitis

    Chih Fang Lee, Jie Yinn Chan, Muhamad Yusri Musa

    Paper ID IA-ICMAEAUS-06126-02 · Pages 25-30

    Abstract

    This paper focuses on performing virtual surgery on pre-operation nasal cavity model of patient with chronic sinusitis and evaluate the effects of virtual surgery on the patient’s nasal airflow. Advancement in Computational Fluid Dynamics (CFD) allows better observation of human nasal airflow and opens up various opportunities for treatment planning. The application of CFD was used to construct numerical simulations of nasal airflows for the pre and post virtual surgical models. Patient with chronic sinusitis was selected and three-dimensional nasal model was constructed based on CT scans. A virtual surgery was performed via manual modifications on the disease nasal model using CATIA V5 software. The results and effects of the virtual surgery on the nasal airflow were analyzed and compared with standardized nasal model. Pre and post virtual surgery conditions of the patient can be studied through various data collections such as cross sectional areas, average velocity magnitudes, velocity contours and streamlines. The analysis of the virtual surgery model shows satisfying results as the average velocity magnitudes match closely with standardized model with the differences of less than 30% at middle region. The findings highlight the potential usefulness of CFD-generated numerical simulation as a pre-operative assisting tool in surgical treatment planning for chronic diseases. Keywords— CFD, Computational Analysis, Chronic Sinusitis, Nasal Airflow & Virtual Surgery.

    Download PDF: CFD Analysis Of Virtual Surgery For Patient With Chronic Sinusitis
  6. A Systematic Review of User Engagement in E-Learning Among Adult Learner

    Asnidabinti Abu Bakar, Tengku Siti Meriam Tengku Wook, Noraidah Sahari Ashari

    Paper ID IA-ICSTMAUS-06126-2255 · Pages 31-36

    Abstract

    E-learning for adult learners is not a new phenomenon. In applying an e-learning for adults, user engagement is one of the most important elements to ensure that user acceptance and understanding becomes an effective learning process. This paper aims to discover existing studies that had been done by previous researcher in the area of user engagement in e-learning with focusing adult learners. 37 papers had been selected and the result discussed about the objectives of the selected papers while the theoretical frameworks, references theories and model applied in the selected papers had been extracted. These findings will help in facilitate other researches for future work in the improving user engagement in e-learning among adult learners. Keywords— User Engagement; E-Learning; Adult Learners; Adult Learning.

    Download PDF: A Systematic Review of User Engagement in E-Learning Among Adult Learner